Great review thank you. I have the exact same machine and it works brilliantly. A word of warning though, being an electrical engineer I was suspicious about the safety earthing of my device. This was because the cast aluminium tumbler body is not double-insulated and the mains lead on mine had no earth pin. Further inspection revealed my fears were justified. I fitted a new three core cable and connected an earth wire to my tumbler's body. I reported the issue to my machine’s supplier but got no response. This is not good as people using the tumbler are likely to be doing so with wet hands and are at risk should the tumbler develop an earth leakage fault. If not modified I would recommend only using the machine connected via an RCD protective device. Thanks again.
Good video. Thanks for sharing. I thought the same thing about the on / off switch. Then I read most of the sheet that came with it, and discovered that it isnt an on / off switch at all, it is a one direction / reverse switch. In the left (1) position, the tumbler rolls one way and then switches direction.
😂😂 my brother in christ that was the funniest product description ive ever heard, got a like from me in the first 40 seconds, great content too no bs 👌
Got a whole bunch of brass bits in our house - cabinet handles etc. All looking a bit sad. Thinking of getting one of these to save me a few hours on the buffing wheel
thanks mate, this has been a great help. it's definitely good to have and Aussie review for this i'm keen to give this a go, the mark up we have here in Aus as you know for everything firearm related seems to be worse than the usual lately. It would be coming up to about 1and a half years with this tumbler, is it still going strong and dramas since Feb? and also do you think the ball bearing or bead media that comes with it would get into the primer pockets or just turf it for some stainless pin media like you have.
Great review thank you. I have the exact same machine and it works brilliantly. A word of warning though, being an electrical engineer I was suspicious about the safety earthing of my device. This was because the cast aluminium tumbler body is not double-insulated and the mains lead on mine had no earth pin. Further inspection revealed my fears were justified. I fitted a new three core cable and connected an earth wire to my tumbler's body. I reported the issue to my machine’s supplier but got no response. This is not good as people using the tumbler are likely to be doing so with wet hands and are at risk should the tumbler develop an earth leakage fault. If not modified I would recommend only using the machine connected via an RCD protective device. Thanks again.
Good video. Thanks for sharing. I thought the same thing about the on / off switch. Then I read most of the sheet that came with it, and discovered that it isnt an on / off switch at all, it is a one direction / reverse switch. In the left (1) position, the tumbler rolls one way and then switches direction.
😂😂 my brother in christ that was the funniest product description ive ever heard, got a like from me in the first 40 seconds, great content too no bs 👌
Very good video. Thank you.😊
Got a whole bunch of brass bits in our house - cabinet handles etc. All looking a bit sad. Thinking of getting one of these to save me a few hours on the buffing wheel
Love it! Just a proper, no BS review! 👍
thanks mate, this has been a great help. it's definitely good to have and Aussie review for this i'm keen to give this a go, the mark up we have here in Aus as you know for everything firearm related seems to be worse than the usual lately. It would be coming up to about 1and a half years with this tumbler, is it still going strong and dramas since Feb? and also do you think the ball bearing or bead media that comes with it would get into the primer pockets or just turf it for some stainless pin media like you have.
Gday mate. It is still going strong. Every part of the brass comes out spotless. Including the primer pockets
how is it holding up after 3 years?
How many kgs of brass do you think this machine could wash at once?
Its hard to say, depends on the size of your cases. I once washed 400 x 22 hornet cases with no issues
That is not an on off switch it reverses the way it spins so things dont get stuck jewelery ect
Cheers mate.