Thanks for the shout out😁✌ glad to see that my feedback has been taken onboard as this video was much better i could not fault it !! Great scrapping keep it up👍
I just subscribed to your channel! I live in Louisiana in the United States! Love to watch scrappers and I love Australia! So glad I came across your channel today!
New subscriber here from New Brunswick CANADA . I am sure I just found one of the top 5 scrapping channels on the tube . You are the first that I have seen scrapping microwaves in the side of the road . most scrappers throw the money in them directly into the shred pile . I will be benge watching your channel for sure .
Hello Mate I'm from the good Ole USA 🇺🇸 I've watched a few of your videos just goes to show we all throw away the same stuff glad there's people out there like you scrapping.
Poly . As I watch you scrap .I see you leaving so much good stuff behind that you can get big bucks for .omg your killing me lol I'm dieing here .I just wish you could here me as I'm screaming take it poly .take it them I say omg he's going to leave it .wow .I love any ways ❤ you young ones are learning .but when you hit 54 years old like I am you look back and say damn I wish I had taken that .when you hit 54 its all down hill from there lol 😆
What a kick-ass day !!! Something for everyone and a bit of everything, loved it. Those magnetrons are good, only thing to avoid is breaking the ceramic (pink or white) electrodes and possibly breathing in any of the dust, which is thought to contain beryllium (toxic heavy metal). leading to lung disease (berylliosis). Don't panic. 👍👍
Awesome day out. If you do take those megnatrons apart be careful most have toxic powder in them. The white tube. Watch a few videos on them. Enjoyed 👍👍
Another great video dude I'm here in the United States in Pennsylvania and I will start watching your videos a couple of weeks ago I was just catching up the classic container you had on your tailgate at the end when you show what you have left over it had special teeth in there those teeth go to a stump grinder for eating waste dumps and logs other stuff like that if they're in good shape you can get good money for them I know they're expensive here in the United States
At the end of the video when you had everything on the ground and some of the stuff on your truck it was a on the left corner of the tailgate you open it up those metal pieces inside there are teeth for stump grinders
I see you were in the you were up and down with taking a positron out on the microwaves when you take them out you get a brass washer you get the two big heavy magnets and in between the two magnets every one of those plates is aluminum and then the positron itself. You take depositron and when it goes from the dime size up to like an inch size there you want to cut right on the edge of that it's copper folded around with metal The whole center piece at fat piece is all copper and as long as you don't cut into the other ends you don't have to worry about anything it's not going to get radiation or sick or anything just throw that in your your metal one. Also the back of the microwaves are usually it's usually the bottom there's metal that's got holes in it there's a little square you take your wire cutters and you look at it you cut the little pieces all pull the metal out of the way there is a motor there with really bare bright copper in it it's not like tons of it but as many microwaves you're getting you that up real quick it's easy to take out and it it's easy money
THUB, Canadian scrapper, Scrapping with Grandpa, Mike the Stavanger all microscrap and do microwaves. Have to be careful, you can get a nasty shock from the transformers. Be safe. Love your videos.
I can't believe you scraped the gold sluice. I would be surprised if it wasn't an easy resale. Also do you ever check the side burners on grill? Sometimes they will have a brass burner ring.
Wow I just learned something! I doubt I’d ever come across one of those again. Spewin! I did find a brass burner in the up coming video 🙂 Thanks for your advice Martin 🙏🤙
Hey Chris. Skipping the wire in the microwaves is a bad habit of mine. Trying to shake it 😅 I’ve not yet tried the turntable motor. Is it a lot of screws to get it?
Poly if your not a street scrapper then I've never seen one my friend.Great finds man,You have one of the best scrapping channels on RUclips in this scrappers opinion.God Bless Brother 🙏👍☮️
Hello Polly, you had a great day. On the magnetron KD Scrapping and go to microwave and he has a great video. He is a Canadian scraper that does micro scrapering for a living. I think you might enjoy it and the best of luck to you.
And by the way get all the wire from microwaves too it all adds up..and I'm from Halifax nova Scotia Canada started scrapping 30 plus years ago cheers and stay safe
I sometimes cut the cords out if I’m not on the road but usually skip in favour of getting in front of more piles. It’ll be 2 years in February for me 🙂
this is just a question ok. But when you get batteries out of little cars, why do you never cut the wires. you loose so much copper wire that way. just wandering.
Go to K&d scrapping channel and he has a video of how to break down the magnetron and if you can find it on Canadian treasure Hunter he has some vids of breaking them down too but it's in amongst all the other stuff so harder to find and I think maybe shark scrapper has one too.
The city I live in in Canada we are only allowed 2 garbage bags a week to put out for thrash. I find the amounts on your streets both amazing and shocking.
@@melindafraser6392 I live in the city of Barrie, Ontario. We have great recycling programs and composting. They even have a program that recycles mattresses.
Is it worth it? I'm new on this channel and also watching content about dumpster diving. I feel like in Australia you can do 100$ in 3 h of normal work easy. This is more for the fun of what you can get right? Good video 👌🏽
For me it certainly is for the fun of what we find. I think with the steel prices now, it’s definitely possible to make a living. It should be rolling by the third year with buyers lined up for the various bulk lots found. You gotta be physically fit for the fitness tho 😆 Cheers ANZ 🤙🤙
That sure was some really amazing stuff, some of those things could have been sold ob ebay for some good cash, but I guess people aren't really interested in that nowadays. Oh well, great video 👍👍😊
It's groovy watching how things are done on another continent halfway around the world. One thing I love about you is you are very organized. Stay cool and stay safe. ♥️✌️
Hello! May I ask please if you are in Sydney? My father loves your videos & consistently watching from the Philippines. He is coming to Australia soon. If possible, I really wish he can meet you. Thank you!
Polly price's, where I live are awfully high, I turn in 1100 pounds of copper#1 @ 4.50 a pound @ 530 pounds of yellow brass @ 3.00 a pound...when your scraping have you ever tried to sell one of those rideable kid's car to sell.?
Great prices marc! I’ve sold one years ago. I replaced the battery and it was perfect. I forget how much I sold it for. Maybe one day I’ll get a small warehouse to bring all the things with me 😁
hello to you, it's very surprising to see what the world throws away but it's good for you. what country are you from because definitely we don't have the same season. I'm from Quebec canada and by the way you're not driving on the right side ha ha very happy to follow you ok ok australia
@@PolyProphet A bigger trailer to hold more is great but maybe a little harder to maneuver in close neighborhoods? First video I watched, I noticed your Nissan has a four foot bed? Seems so tiny. The auto industry has really screwed up the Pickup Truck (IMO). I've got a stiff riding Ford F-250 because of the 8' bed. If I ever trade it in, I'll go back to the cushy ride of the F-150 but try to custom order from the factory for a real bed. Lol!
@@brockshields9336 I’ve had some time to think about this and I’m really enjoying the current set up. Bigger means more fuel consumption, less mobility and buying registration for the bigger trailer. $90-120 for a load that takes me 2-3hrs to pick ain’t bad at all. Then there’s the extras on top! 🤙🤙
@@PolyProphet I love my 8' bed but with the super cab it doesn't fit into tight spots. You do seem to load up a lot of stuff in your 4 footer. I'd say your current setup looks pretty efficient.
@@PolyProphet your welcome can u look up scrapping with Grandpa he made a video of my scrapping called it lessig recycling oklahoma scrapper type lessig recycling in and u will find it on you tube
Dang I try not to but it happens sometimes 😅 My yard only pays scrap steel price for Xmas lights. They used to buy them as low grade wire. I’ve learnt from my experience that BBQs don’t weigh much for the space they take. I’d rather leave that space for something else. Thanks for watching Melinda! 😊🙏🤙
Yes I’ve sold the round table and thermos so far. One thing people often over look is the space needed to store the stuff. If I had the space I’d take more home to resell. Thanks for the advice Mickey 🤙🤙
Who ever said that about you not being a street scaper is off the head probably not been tacking their medication as they have to be mad. Great video today thanks well enjoy your videos Cameron from Kenilworth England
I find my load ends up being much lighter when I do take them. They create voids or dead space. I’ve got a bigger trailer now so I’m more likely to take one 🙂
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Thanks for the shout out😁✌ glad to see that my feedback has been taken onboard as this video was much better i could not fault it !! Great scrapping keep it up👍
Haha no worries mate. Bit of banter 😁 Thanks Spud! 🙏
Hello first time watching from USA Kentucky. Awesome haul. Lots of stuff on the curbs. Really enjoyed your video. Thanks for sharing
Thanks for watching Diana! 🙏🤙
Good to see you getting followers from all over the world ,you deserve it you work hard keep up the good work
My biggest reward is watching your videos! You got your game on proper now. Excited with every new video
Thanks so much Irene! 🙏🤙
I just subscribed to your channel! I live in Louisiana in the United States! Love to watch scrappers and I love Australia! So glad I came across your channel today!
Louisiana! I’d love to go to a diner or something and just listen to you guys talk. It’s the accent! Thanks for the sub paula! 🙏🤙
Also watching from Northeast Louisiana and loving it.
I think you are a very good street scraper .don't listen to the negative ones .you are a great person from what I see on your show
Cheers Bonnie! Bit of banter 😉
The Megatron taken apart has aluminum ( the thin flat pieces) the sm screen piece is brass and 2 heavy duty magnets and steel
New subscriber here from New Brunswick CANADA . I am sure I just found one of the top 5 scrapping channels on the tube . You are the first that I have seen scrapping microwaves in the side of the road . most scrappers throw the money in them directly into the shred pile . I will be benge watching your channel for sure .
Thanks mate. I’ve graduated to breaking them down this way. Old videos I didn’t even pick them up 😅 Learning. Thanks for tuning in gary!🙏🤙
Many places give away the glass plates from inside the microwave. They are very expensive to replace too.
Hello Mate I'm from the good Ole USA 🇺🇸 I've watched a few of your videos just goes to show we all throw away the same stuff glad there's people out there like you scrapping.
Hey Jim thanks for the support brother! 🙏🤙
New Sub just now....Hello all from north of Denver, Colorado in America! Have a great weekend! Stay safe! Peace.....
.
...
Thanks for subscribing Kandi! 😊🙏🤙
Love watching you and will encourage others to watch
Thank you so much Vickie! 🙏🤙
Great video Poly. I can't believe how much stuff you find. Sheesh.
Sheesh alright! Thanks TJ 🙏🤙
The green metal thing is a gold sluce for gold mining. You put miners cloth in it and run material and water across it to catch the gold.
Thanks Robin. Someone clued me in 🙂 I doubt I’d ever see one of those again.
Poly . As I watch you scrap .I see you leaving so much good stuff behind that you can get big bucks for .omg your killing me lol I'm dieing here .I just wish you could here me as I'm screaming take it poly .take it them I say omg he's going to leave it .wow .I love any ways ❤ you young ones are learning .but when you hit 54 years old like I am you look back and say damn I wish I had taken that .when you hit 54 its all down hill from there lol 😆
Yes definitely a lot to learn 🙂
Lololol. Me too ❤
Love the videos mate keep it up 👍
Thank you Brian! 🙏🤙
Great 1st eun!!!!+👍👍👍👍 Love you Poly & all your videos! ❤❤❤❤❤ You're in my prayers 🙏🙏🙏🙏🙏
Nice looking piles of materials and even better prices /cheers ScrapBongo Liked
The only thing you forgot on tge microwave when you scrapped it out was the turn table motor I know they are small but I always take them out
Thanks for the tip mate! 🙏🤙
What a kick-ass day !!! Something for everyone and a bit of everything, loved it. Those magnetrons are good, only thing to avoid is breaking the ceramic (pink or white) electrodes and possibly breathing in any of the dust, which is thought to contain beryllium (toxic heavy metal). leading to lung disease (berylliosis). Don't panic. 👍👍
The more I think about it the more I think it’s not for me. Thanks A! 🙏🤙
What is the magnetron?
That Stanley thermos flask is £70 in the UK and they guarantee them from breakages for life.
Nice scores scrap I love your video
Thanks for watching Judy! 🙏🤙
lol its winter here in wisconsin, not much scrap out there. keep scrapping
Awesome day out. If you do take those megnatrons apart be careful most have toxic powder in them. The white tube.
Watch a few videos on them. Enjoyed 👍👍
Thanks will do Barry! 🙏🤙
I miss you Aussie🇦🇺 and love❤ Australia🇦🇺🐨🦘
Hi, Poly morning...just SUB. Thanks for sharing video.👏👏👏
Thank you bro! 🙏🤙
You kept missing picking up that hand weight. I thought you were going to leave it. lol.
Well done. Great video thanks. 💙
And always keep up the good work.
Hey mate, found you from Mike the Scavenger - he recommended you 😁. Good to see scrapping in Aus.
Mike is the man! Thanks for watching Ze!
Another great video dude I'm here in the United States in Pennsylvania and I will start watching your videos a couple of weeks ago I was just catching up the classic container you had on your tailgate at the end when you show what you have left over it had special teeth in there those teeth go to a stump grinder for eating waste dumps and logs other stuff like that if they're in good shape you can get good money for them I know they're expensive here in the United States
Hmmm I don’t remember the stump grinder?! I’d say they’d be expensive here too
At the end of the video when you had everything on the ground and some of the stuff on your truck it was a on the left corner of the tailgate you open it up those metal pieces inside there are teeth for stump grinders
@@dalesmith147 Wow is that what they are? I still have them. Thanks for the education mate 🙏🤙
I see you were in the you were up and down with taking a positron out on the microwaves when you take them out you get a brass washer you get the two big heavy magnets and in between the two magnets every one of those plates is aluminum and then the positron itself. You take depositron and when it goes from the dime size up to like an inch size there you want to cut right on the edge of that it's copper folded around with metal The whole center piece at fat piece is all copper and as long as you don't cut into the other ends you don't have to worry about anything it's not going to get radiation or sick or anything just throw that in your your metal one. Also the back of the microwaves are usually it's usually the bottom there's metal that's got holes in it there's a little square you take your wire cutters and you look at it you cut the little pieces all pull the metal out of the way there is a motor there with really bare bright copper in it it's not like tons of it but as many microwaves you're getting you that up real quick it's easy to take out and it it's easy money
Mate great advice here! I’ve had a go at the turntable motor now. Super easy!
Hi mate i hope you are well and and thanks for the new video...greetings from Berlin !! 👍
Thank you mate 🙏🤙
Your so lucky here in uk all i have found so far this year is a dryer,one hover,and a oven.far too many people doing it now 👍♻️
You’re right I’m so lucky to be where I am. Hope 2022 gets better for you mate! 🙏🤙
If you want to see how to scrap a magnetron, watch K&D scrapping and he will show how to scrap ever piece in there.
Yes he’s the one everyone is recommending. Thanks for the advice Edward! 🙏🤙
Scrap steel $0.19cents kilo copper $5-6 kilo Car battery's $5
fuel = used $ ?
Lesson dont keep junk the day when you got move $
That’s it. Move things on asap!
THUB, Canadian scrapper, Scrapping with Grandpa, Mike the Stavanger all microscrap and do microwaves. Have to be careful, you can get a nasty shock from the transformers. Be safe. Love your videos.
Thanks Madeline 🙂
Thank you for sharing.
Thanks for watching Rob! 🙏🤙
I enjoyed the video.
What tools do you recommend for a newbie getting into scrapping?
Thanks Liam! Side cutters, multi grips, small sledgehammer and Cordless drill is a good start. Cordless grinder and reciprocal saw are handy as well 🙂
Magnets! Don’t forget the magnets bro 👌
I can't believe you scraped the gold sluice. I would be surprised if it wasn't an easy resale. Also do you ever check the side burners on grill? Sometimes they will have a brass burner ring.
Wow I just learned something! I doubt I’d ever come across one of those again. Spewin! I did find a brass burner in the up coming video 🙂 Thanks for your advice Martin 🙏🤙
I'm full of useless info. 😁 Been scraping as a side hustle for about 35 years or so.
35 years! Very Impressive. My experience is a drop in the ocean in comparison. Accepting any and all useless information 😉
Love your videos... In Croatia you may dreaming for that scrap.
More please see all your videos and be safe hi from the uk in London thanks you
Thanks Paul! 🙏🤙
I have a question why didn’t u take the wire and the turntable motor and that motor has dencent cooper
Hey Chris. Skipping the wire in the microwaves is a bad habit of mine. Trying to shake it 😅 I’ve not yet tried the turntable motor. Is it a lot of screws to get it?
No not hard some of em all u need is a flat head pop the cover of and one screw holding it in
Ok sweet I’ll give it a go 👌
Great video pal👍🏻
Thanks Mick! 🙏🤙
40 cm of snow here . Will just watch you clean up today !✌🏻
😮🥶 Cheers Tom 🙏🤙
In microwave small door on bottom usually 1 screw take out turntable motor.
Keep the advice coming. Cheers Donna 🙏🤙
@@PolyProphet I am just trying to be helpful. I love watching your videos. You find such great stuff.
Hi sorry i missed yu this morning 🌅 so i am watching yu now awesome video
No worries Brenda 🙂
I really love your packing , Joe should see Mike the salvaged man on RUclips from Lubbock Texas your new follower (Cordy)
Thanks for following along Cordy! 🙏🤙
OH be careful not to break the magnetron center. there is very poisonous stuff in most of them.
Microwave MAGNETRONS...DO NOT BREAK THE CERAMIC INSULATOR.....THE CONTENTS MAY KILL YOU IF INHALED
Thanks for the advice Joe 🙏🤙
@@PolyProphet ھگگ کے لیے ایک
Just great finds👍
I'm from GALVESTON COUNTY TEXAS.IM A SCRAPPER ALSO. BUT I TAKE ALL SCRAP.NO MATTER HOW SMALL OR LIGHT WEIGHT IT IS
Yeah I see it’s mad competition where you’re from. Thanks for watching Claude!
iam from Memphis Tennessee I don't leave anything behind, like valcum cleaners.
Poly if your not a street scrapper then I've never seen one my friend.Great finds man,You have one of the best scrapping channels on RUclips in this scrappers opinion.God Bless Brother 🙏👍☮️
Thanks for the encouragement Wesley! 🙏🤙
happy i found your channel.
Thanks for watching 🙏🤙
New subscriber here 💕. Very interesting video 🙂. Thank you for sharing ☺️
Thanks for subscribing Rhonda! 😊🙏🤙
@@PolyProphet you're very welcome 💕😁
Sweet as! Always an enjoyable ride along street scrapping. Don't recommend messing with magnetrons - they contain toxic beryllium oxide. 👍🤙
Thanks for the advice Geoff! 🙏🤙
Hello Polly, you had a great day. On the magnetron KD Scrapping and go to microwave and he has a great video. He is a Canadian scraper that does micro scrapering for a living. I think you might enjoy it and the best of luck to you.
I’ll check it out. Thank you Ron 🙏🤙
Good morning Mister and success
Morning Moh! 🤙🤙
Poly that keg should be able if you check might have a deposit on it.Another good video and thanks for the ride bro.
Sweet thanks for the advice John! 🙏🤙
Do you take the tyres off before scrapping?
I haven’t in the past but plan to in the future
And by the way get all the wire from microwaves too it all adds up..and I'm from Halifax nova Scotia Canada started scrapping 30 plus years ago cheers and stay safe
I sometimes cut the cords out if I’m not on the road but usually skip in favour of getting in front of more piles. It’ll be 2 years in February for me 🙂
There is a small motor in the plate outside
In the microwave?
2:31 boots vans in red bag
58:16 INCREDIBLE red heel booties 😢😢 58:58 close up would have paid for them
this is just a question ok. But when you get batteries out of little cars, why do you never cut the wires. you loose so much copper wire that way. just wandering.
It’s a bad habit of mine. I had blunt cutters for a long while. It was a pain to cut in tight quarters like that. Now it’s a habit.
How come you don't grab the wires when you take the battery out of the toy cars? I've seen you pick up smaller wire from other stops. Just curious .
I’m not too sure. I used to skip them because my cutters were blunt. Now I have new ones so there’s no excuse really 🤔
Go to K&d scrapping channel and he has a video of how to break down the magnetron and if you can find it on Canadian treasure Hunter he has some vids of breaking them down too but it's in amongst all the other stuff so harder to find and I think maybe shark scrapper has one too.
K&D is the one most are recommending. Thanks for the advice Stuart! 🙏🤙
@@PolyProphet he is probably the best bet gets detailed but not long winded
The city I live in in Canada we are only allowed 2 garbage bags a week to put out for thrash. I find the amounts on your streets both amazing and shocking.
It’s shocking to me as well Maggie. I think we need better solutions but also more buy in from the public. Somehow make recycling cool 😁
@@PolyProphet they could start by recycling all the cardboard boxes, at least you are doing your part recycling and reusing items you find.
Only 2 garbage bags a week? Wow you must live in a small city. Here in the city in Canada I live I don't think we have a limit.
@@melindafraser6392 I live in the city of Barrie, Ontario. We have great recycling programs and composting. They even have a program that recycles mattresses.
@@maggiecousineau1877 When I think of Barrie I think of Jennifer Robinson, the Olympic athlete!
Cool merci 🙏👍👍👍👍
Is it worth it? I'm new on this channel and also watching content about dumpster diving. I feel like in Australia you can do 100$ in 3 h of normal work easy. This is more for the fun of what you can get right? Good video 👌🏽
For me it certainly is for the fun of what we find. I think with the steel prices now, it’s definitely possible to make a living. It should be rolling by the third year with buyers lined up for the various bulk lots found. You gotta be physically fit for the fitness tho 😆 Cheers ANZ 🤙🤙
That sure was some really amazing stuff, some of those things could have been sold ob ebay for some good cash, but I guess people aren't really interested in that nowadays. Oh well, great video 👍👍😊
Yeah there’s a lot of steps that could be taken before booking the curb side pick up. People must be busy (lazy?) Thanks for watching mate 🙏🤙
It's groovy watching how things are done on another continent halfway around the world. One thing I love about you is you are very organized. Stay cool and stay safe. ♥️✌️
@jace sure about that. 👂
Good break down time on the micro. 3 minutes. Only thing missed was the plate Motor but that is 10 seconds so about 3:10 seconds
I like this sort of challenge! I’ll have another go next one I see 🤙🤙
You probably know E waste ben ? He always goes to menhari !
Yeah I wish Manhari was around the corner. I’d definitely go there 🤙🤙
Hello!
May I ask please if you are in Sydney?
My father loves your videos & consistently watching from the Philippines. He is coming to Australia soon. If possible, I really wish he can meet you.
Thank you!
G’day Len. No I’m in Melbourne. Hope he enjoys his trip down under 😊
Wow that is great a penny in your pocket will brought you good luck so always keep a penny in your pocket ok
Like find a penny pick it up, all day long you’ll have good luck! Thanks Beatrice 🙏🤙
Polly price's, where I live are awfully high, I turn in 1100 pounds of copper#1 @ 4.50 a pound @ 530 pounds of yellow brass @ 3.00 a pound...when your scraping have you ever tried to sell one of those rideable kid's car to sell.?
Great prices marc! I’ve sold one years ago. I replaced the battery and it was perfect. I forget how much I sold it for. Maybe one day I’ll get a small warehouse to bring all the things with me 😁
empty game boxes sell for $5
I find certain game boxes sell over here. The ones I found were all cracked. Thanks for the advise Donna 🙏🤙
How much was the scrap
Nice load bro .we got our money's worth today. I am now a new subscriber. Cheers! ..
Thank you Look! 🙏🤙
Great video
Not knowing a thing about scrapping, can you tell me what is in electrical cords that make them so valuable?
They are made of copper 👍
hello to you, it's very surprising to see what the world throws away but it's good for you. what country are you from because definitely we don't have the same season. I'm from Quebec canada and by the way you're not driving on the right side ha ha very happy to follow you ok ok australia
Haha I’m in Melbourne Australia 🇦🇺 Canada is a top 3 place I’d love to visit in the world. Thanks for following along 🙏🤙
@@PolyProphet you are welcome
he is from Australia.
You do pretty good on your scrap runs but if a person had a larger truck and trailer they could take a lot more and do really good
Yes agreed! I hope to upgrade my trailer by Easter🤞Thanks Christopher 🙏🤙
@@PolyProphet and within the hour the trailer is on its way to Sinaloa.
@@PolyProphet A bigger trailer to hold more is great but maybe a little harder to maneuver in close neighborhoods? First video I watched, I noticed your Nissan has a four foot bed? Seems so tiny. The auto industry has really screwed up the Pickup Truck (IMO). I've got a stiff riding Ford F-250 because of the 8' bed. If I ever trade it in, I'll go back to the cushy ride of the F-150 but try to custom order from the factory for a real bed. Lol!
@@brockshields9336 I’ve had some time to think about this and I’m really enjoying the current set up. Bigger means more fuel consumption, less mobility and buying registration for the bigger trailer. $90-120 for a load that takes me 2-3hrs to pick ain’t bad at all. Then there’s the extras on top! 🤙🤙
@@PolyProphet I love my 8' bed but with the super cab it doesn't fit into tight spots. You do seem to load up a lot of stuff in your 4 footer. I'd say your current setup looks pretty efficient.
Good job.👍👍👍👍👍
Poly you should test the vacuums to see if they work if they do then sell them But if they don’t then scrap em
I’ll need time and space to do that. Both of which I don’t have much of 🙂
But can you do it in the next vid
Not with vacuums they are dirty to deal with. I can if it’s a PlayStation or Xbox.
I wish i lived there. never find good stuff where I live.
Where you from Donna?
@@PolyProphet I live in Oklahoma, USA
Ahh I see. Seems like heavy competition over your way.
why would you leave that Grill.
I don’t think they are worth the space on my trailer bro. Thanks for watching 🙏🤙
Hey bro ... always watching your Video...
Brass fittings on that water hose
Yes great tip Gail! Thank you 🙏🤙
Was that horse made of metal in pile with video game
Hey Chris. It was ceramic
@@PolyProphet okay love all your videos u do good work great scrapping
Thanks mate I appreciate the support 🙏🤙
@@PolyProphet your welcome can u look up scrapping with Grandpa he made a video of my scrapping called it lessig recycling oklahoma scrapper type lessig recycling in and u will find it on you tube
Sorry, it's the magnetron that are dangerous. Be careful.
100 for the.load was ok, at least you got more vallue stuff in the Copper, Alu, Games and Electronics like the Laptop
I put a fresh windows 10, and gave papa the laptop, for fixing Rickety James 😁
@@PolyProphet Thats cool !
You forgot the cord from the yellow vacuum or power washer. And don't you take Christmas lights and Barbeques?
Dang I try not to but it happens sometimes 😅 My yard only pays scrap steel price for Xmas lights. They used to buy them as low grade wire. I’ve learnt from my experience that BBQs don’t weigh much for the space they take. I’d rather leave that space for something else. Thanks for watching Melinda! 😊🙏🤙
Hey did u ever try resale u passing up a lot of nice stuff people throw out you can make som more cash buddy
Yes I’ve sold the round table and thermos so far. One thing people often over look is the space needed to store the stuff. If I had the space I’d take more home to resell. Thanks for the advice Mickey 🤙🤙
Great scrap day
It was up there! Thanks Wayne 🙏🤙
Who ever said that about you not being a street scaper is off the head probably not been tacking their medication as they have to be mad. Great video today thanks well enjoy your videos Cameron from Kenilworth England
Cheers Cameron!
love the video poly davey east london scrapper uk
Cheers davey bro! 🙏🤙
Dang hon you get lots of things do you do this every day 😮
Usually once a week for 2-4hrs
Cool Merci 👍👍👍je comprends pourquoi tu prends pas la petite ferraille ça te ferait du poids bise
Yes exactly! Thanks Eddy 🙏🤙
Olá, não percebi bem o que levas. Mas também não precisa destruir os brinquedos, cortar fios elétricos, porque pode alguém querer. Me desculpe.
Why don't you take grills, just curious 🤔
I find my load ends up being much lighter when I do take them. They create voids or dead space. I’ve got a bigger trailer now so I’m more likely to take one 🙂
Love you love you. The horse???? That silver colored horse??
Wasn’t it metal?
Possibly. I can’t remember the horse. Was it a kids ride on horse?
Yes. You are scraping. Poly. Why people 😢 be bothering you... Why they don't mind their own damn business.