Last week it would crank then die. After cleaning battery terminals it hasnt cranked again. We put in actuator pin in ignition switch & (unhooked drive shaft to)change starter & it still wont crank! Any ideas at all?? Plz feel free to share ANY ideas at all! Thanks
Great question I have the same problem. Did you happen to find the name of the part. I have a 2008 Liberty that has power but no crack. Thanks for ur time
Did this problem happen after driving for awhile turning off vehicle then trying to start again ? That’s what’s happening with my jeep lib I drive around town stop at a store for 10-20 min come back no start
I have the same question since I think his wouldnt crank ever with that problem. Mine starts but sometimes after turning it off would get that problem for half an hour. Did you manage to fix yours? If so, how?
yup my ignion actuator shaft was broken, but the new one was missing the small spring and the pastic tip was broke that meets the cylinder, swapped parts but can't get the b***h to aling correctly...break time
I checked mines and it’s not broken … still no crank when I turn the key over …. I even tried to Jump the Starter Relay… it cranks over, but doesn’t fire Up …. Any suggestions?
my jeep crapped out between two train tracks in the rail yard i work in...it was the ignition actuator..the ignityion is 3 parts, the actuator aigns the cylinder sleeve..
Thanks so much for the info. And HUGE thanks to all that say fastner sizes too. Absolute God send ❤
Here's another thank you, especially for telling us which tools to get.
Exact thing I needed to find thank you
Thanks for this video -that was exactly the problem and this helped me save a ton of $$$$!
Thanks for the help
Thanks! Also, AKA Security 10 Torx. Just a heads up
What’s the name for the replacement part?
I have a 2009 doing this, thanks!
Last week it would crank then die. After cleaning battery terminals it hasnt cranked again. We put in actuator pin in ignition switch & (unhooked drive shaft to)change starter & it still wont crank! Any ideas at all?? Plz feel free to share ANY ideas at all! Thanks
What’s the name of the part. I have a 2008 Liberty w/ power but no crank.
Ignition actuator pin. I found it in his description
Thanks for the video. What would be the name of the part that I would ask for? Is it the ignition or something else?
Great question I have the same problem. Did you happen to find the name of the part. I have a 2008 Liberty that has power but no crack. Thanks for ur time
Ignition actuator pin. I found it in his description
@@hsmerz3756 and you go autozone and ask for the pin?
@@joerodriguez2645 I just ordered on online. I'm sure it wouldnt hurt to call a store close to you. Would probably be quicker
We did this but mine still won't crank! Any other ideas to check?
Do you know where to find the transmission control module ?
Did this problem happen after driving for awhile turning off vehicle then trying to start again ?
That’s what’s happening with my jeep lib I drive around town stop at a store for 10-20 min come back no start
I have a 2008 Liberty with power but no crank. Did this help urs? And would you happen to know the name of the part I might need. Thank you
I have the same question since I think his wouldnt crank ever with that problem. Mine starts but sometimes after turning it off would get that problem for half an hour. Did you manage to fix yours? If so, how?
Crank position sensor… hope I’m not tooo late 😂
yup my ignion actuator shaft was broken, but the new one was missing the small spring and the pastic tip was broke that meets the cylinder, swapped parts but can't get the b***h to aling correctly...break time
I’m bout to change mine, I seen one video where when he takes the cylinder out he keeps the key in the on position and then pulls it out
What’s the broke piece called?
My jeep liberty wont start sometimes what can I do 😅
How much is this going to cost me when I go to the dealer it will start with my remote starter
Thanks man
I replaced the pin and the switch but still won’t turn over
I checked mines and it’s not broken … still no crank when I turn the key over …. I even tried to Jump the Starter Relay… it cranks over, but doesn’t fire Up …. Any suggestions?
If you fix yours please let me know
Same problem here. Did you find a fix?
Mine turned out to be the immobilizer. I bought an older J2534 passthrough device and deleted the skim module.
I have same issue and chnge all the parts but still it doing same thing any idea
Thanks
have you had your starter tested?
God where was this video when I was looking for it exact thing happened to me acouple months back
What’s the part number to buy this fix? What do i google?
DORMAN 924704
All these Jeep Liberty no start fixes and no one tells the exact part to replace! LOL
I've seen so meny videos and still dont know which part is the one
@@hugobaires2113 it’s an ignition switch actuator pin
my jeep crapped out between two train tracks in the rail yard i work in...it was the ignition actuator..the ignityion is 3 parts, the actuator aigns the cylinder sleeve..
Mine don't turn on at all no Dash lights
Quien construyó ese dolor de cabeza le recomiendo que cambie de marca de auto
OK so far it can be the 10 fuse for the fuel pump
No. He’s getting no crank when he turns key. It’s electrical , not fuel related