Win Car Here - raffall.com/340427/enter-raffle-to-win-kevin-talbots-tamiya-gt3-hosted-by-kevin-talbot Car Details - www.hobbyco.net/rc-1991-audi-v8-touring-58682 Come race at the club facebook.com/groups/247207635741155 🎓Kevin's eBay Secrets - 11 steps to work from home kevtalbot.clickfunnels.com/squeeze-page31158442 🚗Talbot stickers - what-happened-merch.creator-spring.com/ 👕Clothing teespring.com/stores/kevs-merch 🚗Win one of my cars raffall.com/kevin_talbot
We love Noah's mom! 😊 Kev you need to have her as a guest on your videos more often. You also need a shirt saying " We love Noah's mom" if she approves. Lol 😅
Hey Kev! A great trick I like to use to make excess wiring tidy and look cool, is to coil them around a thin rod or screwdriver. Then just remove the screwdriver and it's now a tight pigtail. No more wires flopping around and no need for zip ties. In our tt02 spec class here in Hawaii we are allowed to add front CVD shafts because the stock dog bones pop out way too easily. everybody was complaining that they weren't having fun because after that they are stuck with 2wd.
7th to 4th in the last couple of laps in the final! I didn’t realise I was so far down the field so close to the end of the race 😅. Was an awesome days racing
I think along with the popalongs, Vinny was the only one who know quite well how to drive touring cars on track. Its a bit of a surprise to most, that less steering is more speed, as you could see most youtubers who havent raced touring cars ever, thought MORE steering was good, instead they traction roll and throw driveshafts. 😆
I love these RUclipsr races that you guys do. You don’t really see a whole lot of other youtube channels get together and do stuff like that. Keep up the good videos.
In our tt02 spec class here in Hawaii we are allowed to add front CVD shafts because the stock dog bones pop out way too easily. everybody was complaining that they weren't having fun because after a fairly light wall tap, they are stuck with 2wd. You should suggest to the moderator of the race that cvds should be allowed
Im running a 10BL120 120amp esc and 6.5t brushless setup on 3s and it has only happened to me once with stock dogbone set up. I then fitted yeah racing dog bone setup and works great
There are a few tricks that you can do to make it faster without any upgrades Clean the bearings grease out, don't run the shields on the inside of the hubs. There is no way to get dirt inside so they arent required Use grease to fill the diffs plus more
I love the simplicity of the TT02 . I’ll be doing a build series on my channel this summer. Maybe even some spec racing ! Keep the great videos coming !
When I was a kid there was an indoor dirt arena like a motor cross track that was just for RC and man it was hard! Takes a lot more skill than I ever thought to race RC’s on a circuit
Kev I just want to say you're such an inspiration to so many people. I found your channel just recently after buying a cheap hobby grade car and your personality and the way you approach challenges is so refreshing. It's been helpful watching you take your toys out and just rip around without a care in the world who might see you or what they might say. Thank you Kev. I hope I get to meet you one day.
They're great cars to start racing and as you say nothing cheaper. They need a few mods though, best mods are Kimbrough servo saver, bearing kit and front CVD's
The build gave me some memories, although not so distant because I had built my own TT-02 buggy variant, with the only difference being wiser arms and longer suspension.
It appeared all of you had a lot fun. Vinnie drove exceptionally well. It's too bad your servo failed. The TT02 class is becoming more popular in the U.S. because of the cost of r/c cars today. I enjoyed the video.
My two sons and I built these chassis. Yes our first parking lot race, parts were falling off like crazy. If I were to build them again, I would stock up on a few gallons of lock-tite. I still prefer my TA TC3. Runs like a champ still. Great video.
For the next RUclipsr race, you guys should take a road or rally car from HSP/Redcat/Exceed, way over power it, and see who can make it last the longest. Most laps wins.
Put a firm backing behind the body when you are cutting it. The way you were holding it gave you very little control of the knife, especially when you moved away from your holding hand, which is what gave you the backing for for the beginning of the cut.
Nice, i recently got the same body for the TT-02! I love that platform, despite it beeing almost toy grade. The body came out fine btw, its in my community posts! But the wheelbase of this Porsche (and every other Porsche of Tamiya) is 251! So i cant put it on my TA08 :(. Gonna fix a second tt-02 with the correct wheelbase, since i dont feel like switching wheelmounts it everytime i wanna switch bodies!
Kevin there's loads of upgrades for theses cars pretty cheap on Amazon, I spent all winter upgrading almost every part to anodized blue aluminum and stainless skidplate, built it into a solid 4wd drift car, tons of adjustments, steering, suspension, driveline, diff lock, some are tamiya parts, some chinese, handles 3s power, all parts fit quite good considering low prices, anyway good luck in your move! John
you are my RC hero for me and my 5 year old kid. Sure wish my boy could meet you one day for some "footage" . Always looking forward to your videos for more knowledge. Also looking forward to more raffles. One day we may get lucky here in the US.
Call me crazy, but I think that there needs to be a third RUclipsr race, but where everyone is running a out of the box Ready to Run Carisma 1/24 rally car at some sort of rallycross track that NO ONE has raced at. The ONLY variation that I would allow is body style. To me, that would make it a true driver's race, as all the cars would be the exact same underneath.
I've raced a TT02 with just upgraded shocks and using rubber slicks beat everyone in the stock class. Some guys had cars that cost 5 or 6 times my car. It's all about car setup.
First of all: thank you so much for all the enjoyable videos, they’re amazing! Also: could you please make a a video about the rustler 4x4 vxl where you cover all its weaknesses and how to solve them (tell us what upgrade parts you recommend). I have one myself and I’m really struggling finding the best value for money parts for my rustler :)
what I hate the most is that almost all Tamiya's RC KIT products contain plastic differential bevels except some 'pro' or 'srx' versions. But anyway, Tamiya is a company that loves to make innovative designs like BB-01, etc Hope you have a nice time Kevin!
Win Car Here - raffall.com/340427/enter-raffle-to-win-kevin-talbots-tamiya-gt3-hosted-by-kevin-talbot
Car Details - www.hobbyco.net/rc-1991-audi-v8-touring-58682
Come race at the club facebook.com/groups/247207635741155
🎓Kevin's eBay Secrets - 11 steps to work from home kevtalbot.clickfunnels.com/squeeze-page31158442
🚗Talbot stickers - what-happened-merch.creator-spring.com/
👕Clothing teespring.com/stores/kevs-merch
🚗Win one of my cars raffall.com/kevin_talbot
Jeremy bike hacks
Kevin could you please let me know where I could buy full-size “Game Over” decals for my 2006 Pontiac GTO with 750 hp. I would be forever grateful.
I saw the raffal before the video was even out lol
This was awesome lots of fun to watch put my tickets in for the raffle it would be a proper trophy car haha
I been watching u for years now. I got my first Rc last Christmas. I’m slow building my collection. Do u still have that eBay class?
We love Noah's mom! 😊 Kev you need to have her as a guest on your videos more often. You also need a shirt saying " We love Noah's mom" if she approves. Lol 😅
Yes more of Noah’s mum❤
👎🏻
Get a life mush 😂
A wonder if kev has took noahs mum for a spin in his lambo lol 😆
Hey Kev! A great trick I like to use to make excess wiring tidy and look cool, is to coil them around a thin rod or screwdriver. Then just remove the screwdriver and it's now a tight pigtail. No more wires flopping around and no need for zip ties. In our tt02 spec class here in Hawaii we are allowed to add front CVD shafts because the stock dog bones pop out way too easily. everybody was complaining that they weren't having fun because after that they are stuck with 2wd.
Noah’s mom for the win! Great video kev
WOW!! 🎶NOAH'S MOM HAS GOT IT GOIN' ON!!🎶😳😍🥰
7th to 4th in the last couple of laps in the final! I didn’t realise I was so far down the field so close to the end of the race 😅. Was an awesome days racing
Lol
Lol
Kevin was in destruction derby mode while everybody else was racing!!
😂
😂😂
like that kevin cheated with the body and 3s while he got trollface on the headlights :O
I had a little bit of an advantage: pro set up car, pro car on a track you raced at many times. LOL
Oh my... Hello Noah's Mum 👍🏼. Very nice 💕
VINNY is a perfect example. Dedication and hard work will get you the W
I think along with the popalongs, Vinny was the only one who know quite well how to drive touring cars on track. Its a bit of a surprise to most, that less steering is more speed, as you could see most youtubers who havent raced touring cars ever, thought MORE steering was good, instead they traction roll and throw driveshafts. 😆
TT02s are great fun and can be wickedly fast.
To keep your lines straight using a knife to cut out the shell put some masking tape along the line so it gives you a straight edge it helps loads.
On 3s that thing was nuts!! So fast!
Noah’s mum is 🔥
duckbill napping shears for carpet They’re about the best scissors that I know of
I love these RUclipsr races that you guys do. You don’t really see a whole lot of other youtube channels get together and do stuff like that. Keep up the good videos.
blooming eck , that red is blinding 😁 🤣
Hopefully one day I can join a race with you guys
No worries man! I’ve seen you drive and you got an edge on all of them. Xmaxx + skatepark = insanity.
Can't believe Vinnie dropped fire merch and didn't tell anyone.
i love your videos keep making them
I say hats off too anybody who can handle that weird beep going on, in the background at the race day. They're the real winners😅😅😅
I've been using dremels to cut my bodyshells, and they work perfectly every single time 🤣🤣
Just great to see and show everyone just how much rc brings people together.👍
Came for gt3, stayed for noah's mom 😊
Kev i rele like your video i started making rc car because of you
Looks like a fun class
Way back I. The day we ran TL01s as the spec class… was so much fun to race. The TT02 spec class is growing more and more
I love Tamiya Cup racing!. My biggest problem I had with my tt02 were the dog bones falling out repeatedly.
In our tt02 spec class here in Hawaii we are allowed to add front CVD shafts because the stock dog bones pop out way too easily. everybody was complaining that they weren't having fun because after a fairly light wall tap, they are stuck with 2wd. You should suggest to the moderator of the race that cvds should be allowed
Im running a 10BL120 120amp esc and 6.5t brushless setup on 3s and it has only happened to me once with stock dogbone set up. I then fitted yeah racing dog bone setup and works great
Cool rc, nice race meet 👍👍
There are a few tricks that you can do to make it faster without any upgrades
Clean the bearings grease out, don't run the shields on the inside of the hubs. There is no way to get dirt inside so they arent required
Use grease to fill the diffs
plus more
I love the simplicity of the TT02 . I’ll be doing a build series on my channel this summer. Maybe even some spec racing ! Keep the great videos coming !
I've just seen Mat Armstrong complete a rebuild on a real one of these. You guys should do a collab
Definitely need more of Noah's mum in the vids. Makes a nice change from your mug 🤣
Noah's mom has got it going on!
Noah’s mother is lovely! 🤩
That Porsche GT3RS RC car is cool and those racing videos are fun to watch
When I was a kid there was an indoor dirt arena like a motor cross track that was just for RC and man it was hard! Takes a lot more skill than I ever thought to race RC’s on a circuit
honestly i love tt02's and tt01e kit's they're very fun to build and they're good onroad cars
Noah’s mom has got it goin on! 🎶
The ripping method always worked good for me. On my first and second try no problems.
Love these battles. Can you guys do a 1/5 scale or bigger rc demolition derby. That would be awesome
Oh damn, Noah's mum ;P Go on Kev! Get it
Congrats Your Monster Truck is on the Official Santa Pod Poster for the MT Show in August 👍
It's awesome that you have anything that you will know about it and great job that makes you feel good about yourself
Kev I just want to say you're such an inspiration to so many people. I found your channel just recently after buying a cheap hobby grade car and your personality and the way you approach challenges is so refreshing. It's been helpful watching you take your toys out and just rip around without a care in the world who might see you or what they might say. Thank you Kev. I hope I get to meet you one day.
Cool :) We definitely appreciate the screentime of Noah's Mom in this video. I will hate the time when Noah will have his license and car :D
They're great cars to start racing and as you say nothing cheaper. They need a few mods though, best mods are Kimbrough servo saver, bearing kit and front CVD's
The build gave me some memories, although not so distant because I had built my own TT-02 buggy variant, with the only difference being wiser arms and longer suspension.
It appeared all of you had a lot fun. Vinnie drove exceptionally well. It's too bad your servo failed. The TT02 class is becoming more popular in the U.S. because of the cost of r/c cars today. I enjoyed the video.
Man...that sure looked like a whole lotta fun ! Vinny the dominator !
It's almost like Vinny does this all day long 5 ti 6 days a week lol
😂😂
Whooo epic racing! Had such an awesome morning! 😀
Sunday morning racing in Milton sounds great!
This is amazing how you do this with your friend it's amazing👍 but that's just the right one
My two sons and I built these chassis. Yes our first parking lot race, parts were falling off like crazy. If I were to build them again, I would stock up on a few gallons of lock-tite. I still prefer my TA TC3. Runs like a champ still. Great video.
Whoa, you really torqued down those bolts. Good video.
Love these vids! I especially like the time that you took to talk to each of the channels
For the next RUclipsr race, you guys should take a road or rally car from HSP/Redcat/Exceed, way over power it, and see who can make it last the longest. Most laps wins.
Put a firm backing behind the body when you are cutting it. The way you were holding it gave you very little control of the knife, especially when you moved away from your holding hand, which is what gave you the backing for for the beginning of the cut.
Got some awesome cars there! I built a ramp but it got destroyed by my XMax 🤣🤣😂😂
Cool j'adore 💕
When trimming lexan bodies, use a SHARP knife and a steel STRAIGHTEDGE for straight lines, and use a Dremel with a sanding drum for curves.
Nice, i recently got the same body for the TT-02! I love that platform, despite it beeing almost toy grade. The body came out fine btw, its in my community posts! But the wheelbase of this Porsche (and every other Porsche of Tamiya) is 251! So i cant put it on my TA08 :(. Gonna fix a second tt-02 with the correct wheelbase, since i dont feel like switching wheelmounts it everytime i wanna switch bodies!
Kevin there's loads of upgrades for theses cars pretty cheap on Amazon, I spent all winter upgrading almost every part to anodized blue aluminum and stainless skidplate, built it into a solid 4wd drift car, tons of adjustments, steering, suspension, driveline, diff lock, some are tamiya parts, some chinese, handles 3s power, all parts fit quite good considering low prices, anyway good luck in your move!
John
Noah's Mum: HELLLO there! wink wink
Now that looked like a lot of fun Kev. I love seeing all you youtubers get together. It’s pretty special. Shame about the steering issue.
Vinny is a smart man, and top level team merch.
Reminds me of my old asso. Tc3. Even sounds like it! Lol. Loved mine! ☺️
Kevin you should do a review on the traxxas square body
Noahs mum smiling her face off knowing shes a godess in a room full of nerds lmao l....shes a stunner ill admit
You can flip the upper control arms at the front and give it caster. Just cut a bit of plastic from the front bulkhead
Not gonne lie....Noah's mom is a 10/10🔥👌
Sounds like a band name..... Vinny and Popalongs!" 😂😂😂😂
This is the First Porsche RC car I've seen... Finally..
Make it go 100mph 😮😂😂
Would love to see that 😂
If Kevin doesn't do some damage, it is an imposter that how you know Kevin is the real deal
Best channel on RUclips
you are my RC hero for me and my 5 year old kid. Sure wish my boy could meet you one day for some "footage" . Always looking forward to your videos for more knowledge. Also looking forward to more raffles. One day we may get lucky here in the US.
If you use the knife to cut the body try cutting it from the inside and put painters tape down and then cut it.
Call me crazy, but I think that there needs to be a third RUclipsr race, but where everyone is running a out of the box Ready to Run Carisma 1/24 rally car at some sort of rallycross track that NO ONE has raced at. The ONLY variation that I would allow is body style. To me, that would make it a true driver's race, as all the cars would be the exact same underneath.
we are planning to do mardave minis next :)
Everybody loves a bit of Noahs mum 😂
I been waiting on the for you to make the video on the really old rc cars
I've raced a TT02 with just upgraded shocks and using rubber slicks beat everyone in the stock class. Some guys had cars that cost 5 or 6 times my car. It's all about car setup.
I love your videos and my sisters boyfriend is why he started rc cars and race them.
I would love to see this again but with Kyosho Fazer MK2's.....
So good! Would love to see you guys race again!
Hey Kev your videos are a big reason im getting back into this
thanks mate😎!!!
kev i use a good pair of tin snips to cut car body shells works a treat give it a try buddy
your videos never disappoint - keep up the good work 😃👍🔥
First of all: thank you so much for all the enjoyable videos, they’re amazing! Also: could you please make a a video about the rustler 4x4 vxl where you cover all its weaknesses and how to solve them (tell us what upgrade parts you recommend). I have one myself and I’m really struggling finding the best value for money parts for my rustler :)
Good to see TomleyRC (aka Ralphie) there!!
Agfrc servos kev. You know better than to experiment on race day 😂
Kev - would love to see you fully deck out the tt02 and over power it to see what it can do.
You should get a TT-02BR 4wd buggy and take it racing.
Great video as always Kev, roll on the next RUclips race👍👍👍
Kev you should twin turbo your lamborghini 1000hp and also Raffall your drag slash
what I hate the most is that almost all Tamiya's RC KIT products contain plastic differential bevels except some 'pro' or 'srx' versions. But anyway, Tamiya is a company that loves to make innovative designs like BB-01, etc Hope you have a nice time Kevin!
When he builds im always waiting for the oh nooo lmao