The wait will be worth it. Got one as soon as they came out. I was hesitant at first cause I normally don’t just rush purchases like that it but was well worth it. Good luck with it!
I have a American original 60s in threetone ....man I want that Olympic white ....is the 7.25 radius fretboard harder o play? Great tone man were you playing a black face?
Glad I found your channel, great playing. This is one of the best strat looks, isnt it? I have a guitar which happens to be very similar to this, mine is a japanese fender. White and rosewood. Hey, great sound and vibrato, congrats, all the best.
The only downside to this is the poly undercoat, and the fact that you can't lower the action too much without bends choking out due to the 7.25 radius. The former, Fender should be disclosing on the spec sheet. The latter is just a reality of the vintage radius, which feels awesome but if you're a lead player, takes a lot of adjusting to.
kral eline sağlık çok temiz çalıyorsun, alet de muhteşem maşallah nazar değmesin. bir soru sormak istiyorum bende de mexico fender var manyetik değiştirmeyi düşünüyorum ilerleyen zamanlarda hangi manyetiği tavsiye edersin custom shop manyetiklerden? SRV ve Jimi Hendrix tonları çok hoşuma gidiyor.
Çok teşekkür ederim, daha iyileri sizin olsun. Manyetik olarak Pure Vintage 59’ ile 60’ manyetikleri tavsiye ederim ancak bunların input-output seviyelerinin gitara uyup uymadığına dikkat edin. American Vintage manyetikler de müthişler. Umarım faydalı olmuştur.
Did you deck the trim or leave it floating? I usually deck all my trims bright think when I get this StratI’m just gonna leave it floating and try to deal with that if it stays in tune
Thanks for asking, I decked it and am used to it so I like that one way pushing down. And it was not going out of tune at all when it was floating at first
Great playing! I saw that you were able to get the trem arm to fall back into place. Did you do this by just not screwing it in as much (with the spring still inside)?
I usually only like Strats with maple fret boards....but watching this Im re-thinking my stupid position!...if only it had a satin or unfinished neck. What a shame.
Got my Vintage American 61 Strat about 3 weeks ago direct from Fender and sent it right back. It felt good but the fretboard had Lacquer smears on multiple frets under the B and E strings. Some frets were unfinished on the sides. Very sloppy workmanship. Dumping over 2k on this guitar and being American made I was thinking I was getting a better quality. My MIJ Strat I purchased new in '87 puts this guitar to shame. Not impressed with their quality control. Mine looked like a factory second you would find on sale at Guitar Center for 50% off. They suggested that I take it to a local Fender warranty shop but after dropping that much money the last thing I need to do is waste my time and gas trooping this thing around. Buyer beware...their quality control has really dropped.
Well that is suprising and not good at all. I got nothing to complain about that guitar, everything is great and feels amazing luckily. The quality control is actually good on mine. However, that should not be happened. Nobody should experience that kind of issues about a guitar which you pay 2k...
There’s lots of evidence that suggests Fender never did ‘proper’ Nitro since the early 60’s at the very latest. As well as lots of reports of finishes being all over the place. If you want a guitar to ‘age’, just got to not look after the guitar and play it a lot. At that point, the type of finish doesn’t matter too much, just Nitro is softer.
The ‘61 is considered the ultimate Strat
Great guitar...
Great amp sound...
Great playing!!!!
I ordered mine last week , with a set of Seymour Duncan single coil staggered pick ups. Just for a bit more punch for playing blues / beautiful guitar
You are selling a ton of these. Great playing. 👍
It’s an amazing guitar
Great playing and a beautiful guitar. Love it in Olympic White with the mint pick guard. Its such a classic look.
Just ordered mine! Set to get here in April bc of the back order. So just watching vids till then lol
That’s cool! Happy for you man, enjoy that amazing guitar!
The wait will be worth it. Got one as soon as they came out. I was hesitant at first cause I normally don’t just rush purchases like that it but was well worth it. Good luck with it!
Hey man they have them instock on the fender website. Gave me a delivery eta for feb 16
I have a American original 60s in threetone ....man I want that Olympic white ....is the 7.25 radius fretboard harder o play? Great tone man were you playing a black face?
@@billhannum4117 Thanks for asking. It never fights me while playing, so comfortable for me. Yes, it is Fender Blues Jr IV Black Face.
Great Demo,nice playing. Excellent guitar 🎸
Fantastic playing and tone!
Came for a review and some impressions, stayed for your playing. Tasty!
Thank you!
Fantastic playing
Amazing hat in the backgorund.
I think I'll buy this guitar :)
Wow, superb playing and tone😃 so good I had to subscribe 👍🏻. Thank you for sharing.
Nice playing, delikanli👍Greetings from Germany
nice playing... 👍👍
Mükemmel çalım ve tuşe! Başarılarının devamını dilerim 🤘
Sounds great.
If they ever make this one in burgundy mist (or maybe sherwood green) it's an INSTANT buy for me!
sounds great
Glad I found your channel, great playing. This is one of the best strat looks, isnt it? I have a guitar which happens to be very similar to this, mine is a japanese fender. White and rosewood. Hey, great sound and vibrato, congrats, all the best.
Thank you!
aynısının fiesta red olanını aldım geçen hafta ,türk birinden bu içeriği görmek heyecanlandırdı teşekkürler,hayırlı olsun.
Size de hayırlı olsun, güle güle kullanın. Çok teşekkürler.
讚喔
總言之 一句話
我說不一樣 它就是不一樣!
Scuttle Buttin
nice guitar!
Is that a stevie ray Vaughan Stratocaster in the background?
@@alanwarren4587 Nope, it’s Squier 60’s Classic Vibe
The only downside to this is the poly undercoat, and the fact that you can't lower the action too much without bends choking out due to the 7.25 radius. The former, Fender should be disclosing on the spec sheet. The latter is just a reality of the vintage radius, which feels awesome but if you're a lead player, takes a lot of adjusting to.
If you play it enough, you'll need a fret job, then it can be shaved to the perfect 8inch😁
kral eline sağlık çok temiz çalıyorsun, alet de muhteşem maşallah nazar değmesin. bir soru sormak istiyorum bende de mexico fender var manyetik değiştirmeyi düşünüyorum ilerleyen zamanlarda hangi manyetiği tavsiye edersin custom shop manyetiklerden? SRV ve Jimi Hendrix tonları çok hoşuma gidiyor.
Çok teşekkür ederim, daha iyileri sizin olsun.
Manyetik olarak Pure Vintage 59’ ile 60’ manyetikleri tavsiye ederim ancak bunların input-output seviyelerinin gitara uyup uymadığına dikkat edin. American Vintage manyetikler de müthişler. Umarım faydalı olmuştur.
@@can_bayoglu teşekkürler tavsiyelerin için :). içeriklerini çok beğendim takibe aldım. başarılar dilerim.
The guitar sounds great
What tube amp are you using ?
Thank you! I used Fender Blues Jr IV in this video.
Did you deck the trim or leave it floating? I usually deck all my trims bright think when I get this StratI’m just gonna leave it floating and try to deal with that if it stays in tune
Thanks for asking, I decked it and am used to it so I like that one way pushing down. And it was not going out of tune at all when it was floating at first
Great playing! I saw that you were able to get the trem arm to fall back into place. Did you do this by just not screwing it in as much (with the spring still inside)?
Thank you! Yes, I basically ended up not screwing too much, just to fall it back.
I usually only like Strats with maple fret boards....but watching this Im re-thinking my stupid position!...if only it had a satin or unfinished neck. What a shame.
Why only maple? Just curious
What String Gauge Are you using? Nice Vid 😃
Thank you! I’m using 11-52 Daddario Strings.
@@can_bayoglu parmak değil mızrak mübarek :))))
@@can_bayoglu thx Brother sounds amazing 🤠
Nice! What string Guage is this???
10-49 was the stock strings on it, I use 11-56 Daddario
What amp is this running into?
In the description…
Got my Vintage American 61 Strat about 3 weeks ago direct from Fender and sent it right back. It felt good but the fretboard had Lacquer smears on multiple frets under the B and E strings. Some frets were unfinished on the sides. Very sloppy workmanship. Dumping over 2k on this guitar and being American made I was thinking I was getting a better quality. My MIJ Strat I purchased new in '87 puts this guitar to shame. Not impressed with their quality control. Mine looked like a factory second you would find on sale at Guitar Center for 50% off. They suggested that I take it to a local Fender warranty shop but after dropping that much money the last thing I need to do is waste my time and gas trooping this thing around. Buyer beware...their quality control has really dropped.
Well that is suprising and not good at all. I got nothing to complain about that guitar, everything is great and feels amazing luckily. The quality control is actually good on mine. However, that should not be happened. Nobody should experience that kind of issues about a guitar which you pay 2k...
The av ii collection has tons of qc issues if you look around. Disappointing
@@1148bucknasty damn. That's too bad.
What’s the deal with the nitro finish? I hear some people say it isn’t a ‘real’ nitro.. will this age the same as others?
It’s very glassy and won’t be aging like real vintage guitars I think but who knows, we’ll see…
@@can_bayoglu thanks!
There’s lots of evidence that suggests Fender never did ‘proper’ Nitro since the early 60’s at the very latest. As well as lots of reports of finishes being all over the place.
If you want a guitar to ‘age’, just got to not look after the guitar and play it a lot. At that point, the type of finish doesn’t matter too much, just Nitro is softer.
It's polyurethane sprayed with a single coat of nitro.
@@marfg12345pointless then?!
Looks like the action is about a quarter inch too high lol