Hi! What's the size of the floor that can be done with one sensor? Also, what's the max quantity of sensors connected to TD and thus size of the floor that can be interactive?
If you use UST-10LX, you can detect 10 meters. Radial. If UST-20LX, 20 meters. I'm not sure how many sensors you can connect correctly because I've never done test. But I've seen the case with 3 hokuyo sensors. I hope it would be your help.
Hi, thanks for your comment. Well, almost same thing, but you need to set the origin point. you would subtract or add it from the sensor values. I hope it works well for you!
Thanks for your comment. You don't totally need it. If you can set sensor stably, it's alright. Actually I bought it. It has magnets, so I can set it on the wall that is magnetic.
Thanks for asking me. If you mean that you want to delete something with no signal , you should control active switch with connecting Hokuyo. Speaking of this tutorial, you can delete circles by alpha going to 0 in off. The way might be one of many solution.
Thanks your comment. Unfortunately, the video doesn't have English, but I'll post new tutorial for Hokuyo in the future! Besides, I pasted the like of the toe file in the video description. Check it out!!
Hello Miwa, thank you so much for sharing! this is a great tutorial.
Thanks for watching!
こんにちは、ビデオをありがとうございます。たくさんのことを学びました~でも、問題が発生しました。Blob TrackコンポーネントでMax Blobsを2に設定していますが、足部データを取得できない場合、レーダーの位置に青い円が表示されます。これはどのように解決できますか？ありがとうございます。
動画ご覧いただきありがとうございます。その理由は、検出できない場合は位置が（０，０）になるからです。検出できてるかどうかのフラグで円のアルファを変えてみてください。
Hi! What's the size of the floor that can be done with one sensor? Also, what's the max quantity of sensors connected to TD and thus size of the floor that can be interactive?
If you use UST-10LX, you can detect 10 meters. Radial. If UST-20LX, 20 meters. I'm not sure how many sensors you can connect correctly because I've never done test. But I've seen the case with 3 hokuyo sensors. I hope it would be your help.
hello, very nice video, how can i use two lasers to avoid cones of shadow?
Hi, thanks for your comment. Well, almost same thing, but you need to set the origin point. you would subtract or add it from the sensor values. I hope it works well for you!
Hi, thanks for this video! Is the aluminum plate necessary for keeping the sensor cool (and did you make it on your own)?
Thanks for your comment.
You don't totally need it. If you can set sensor stably, it's alright.
Actually I bought it. It has magnets, so I can set it on the wall that is magnetic.
貴重な情報ありがとうございます。初心者には本当にありがたいです。同じように足についてくるワイヤーは出力できました。応用でマウスやメタボールなどの位置を北陽センサーに置き換えようとすると今一つうまくいきません。マウスなどのTransulateiに値を入れるなど、何かコツがありますか。
SOPの原点を中心にしてインスタンシングをするとよいです。もしくは、キャリブレーションがうまくいってない問題かもしれません
@@miwa_maroon 返信ありがとうございます。アドバイスをもとに、いろいろ試してみます。また教えてください。
@@aki4115 こちらこそコメントありがとうございます。私もまだまだ勉強中ですのでこれからも精進します。
申し訳ありません。
最後に質問を1つだけします。
信号がなければ消えることができますか？
Thanks for asking me. If you mean that you want to delete something with no signal , you should control active switch with connecting Hokuyo. Speaking of this tutorial, you can delete circles by alpha going to 0 in off. The way might be one of many solution.
H! is there a way to listen it in english? do you would like to share the .toe file maybe :) ?
Thanks your comment. Unfortunately, the video doesn't have English, but I'll post new tutorial for Hokuyo in the future! Besides, I pasted the like of the toe file in the video description. Check it out!!
@@miwa_maroon thank you so much :)
2人がするときはTouchDesignerでどうしますか？
If you detect two person, you set Max Blobs to 4 in Blob Track CHOP. Because of two legs a person.
@@miwa_maroon 返信。 ありがとうございます。 良い映像を楽しみにしています。
教育していただいたようにしてみました...
1m以上は外れますね。
床を育てるにはどうすればいいですか？
解決しました。
Y math
良かった！
If you wanna detect more large area, you might consider two or more sensors.
Thanks!!
Wow, many thanks
good job
What also supports radar
For depth sensor, kinect, realsense, zed and so on. We can use any sensor that we can connect to aruduino or raspberrypi cause of serial CHOP
@@miwa_maroon thank you very much