Thanks for the video!! I always cut the tight belt with a knife to make things easier and also position the seat forward more to access the seat bolt holding the belt to the seat and allow more access to the middle pilar. Anyways that’s all I got thanks again.
You make good videos. Thanks. You mentioned the airbag piece on pillar, and it scratching easy. The solution is once younpop put the bottom. Push the cover that says airbag out from the backaode with your clip removal tool. It's simple .
I am glad you enjoyed my video!!! Google clip remover Neiko or look for it on Amazon it should be a kit of 6 I believe different sizes! It’s my favorite tool for this kind of work!
@@boy10boy so the seat belts have to be sitting in their postions properly in order for you to be able to extend them , if yours retracted all the way sir the seat belt portion the retractor basically in it’s spot and tighten it with the screws and you should be a able to extend it!
@@brownsburg.motorsports thank you for the reply but I am still confused. My seatbelt is for a 2014 terrain, so similar. Do I install the seatbelt and hook up the sensor for it to retract back out? I don’t necessarily see anything to release the seatbelt otherwise, but it’s not long enough to be able to attach the 3 points
Definitely would love to know this too. My 2017 terrain had the airbags deploy internally/in the frame (no accident just driving normally) and now my front seatbelts are locked in place.
@@hughmungus2645 if you’re front seat belts are locked in place that means your seat belts have been deployed and would need to be repaired or replaced with ones that aren’t!
![Chino Pacas - Modo Capone (with Drake & Fuerza Regida) [Video Oficial]](http://i.ytimg.com/vi/zjv8TQ0gBkg/mqdefault.jpg)
Thanks for the video!! I always cut the tight belt with a knife to make things easier and also position the seat forward more to access the seat bolt holding the belt to the seat and allow more access to the middle pilar. Anyways that’s all I got thanks again.
You are most welcome! Glad the video was helpful and yes those can be a pain sometimes 😬
Excellent video m! thank you for taking your time on it because all the details made it easier when doing the job on my end.
@@jeffg5576 you are most welcome! I am glad the video was helpful 🙌🏽
Best video on seatbelt removal!
Thank you for watching and I am glad it was helpful!
You make good videos. Thanks. You mentioned the airbag piece on pillar, and it scratching easy. The solution is once younpop put the bottom. Push the cover that says airbag out from the backaode with your clip removal tool. It's simple .
Thank you so much for tip and I appreciate you watching my video 😄
Thank you for all the information extremely helpful I like witching..can you tell me please where to buy the Trim tool you used ? Thanks
I am glad you enjoyed my video!!! Google clip remover Neiko or look for it on Amazon it should be a kit of 6 I believe different sizes! It’s my favorite tool for this kind of work!
If i buy it or take it from a junkyard car does it need programming or just install it and it'll work????
@@ricop.c2217 it shouldn’t need programming it should be just remove and replace and you’re good!
Thank you for the video. I have the part but it retracted all the way, is there anyway to get it to retract or do I have to take it back?
@@boy10boy so the seat belts have to be sitting in their postions properly in order for you to be able to extend them , if yours retracted all the way sir the seat belt portion the retractor basically in it’s spot and tighten it with the screws and you should be a able to extend it!
@@brownsburg.motorsports thank you for the reply but I am still confused. My seatbelt is for a 2014 terrain, so similar. Do I install the seatbelt and hook up the sensor for it to retract back out? I don’t necessarily see anything to release the seatbelt otherwise, but it’s not long enough to be able to attach the 3 points
Definitely would love to know this too. My 2017 terrain had the airbags deploy internally/in the frame (no accident just driving normally) and now my front seatbelts are locked in place.
@@boy10boy yes sir the bottom portion with the T50 bolt and the 10 mm up top then you should be able to pull the seat belt and hook up the rest of it
@@hughmungus2645 if you’re front seat belts are locked in place that means your seat belts have been deployed and would need to be repaired or replaced with ones that aren’t!