The engine ECM fuse was good, what was bad it was the connectors, the inside prong teeth whatever it’s called, it was bent up, and wasn’t making contact!!!
Thank you so much for your video. You just saved me. I was stranded in the middle of nowhere, and thanks to your video, I found that the fuses in my truck were corroded by water.
Check all the wiring by the batteries, clean all the post, check wires if they are dirty, wiggle the wires and see if the truck turns off if it turns off theirs a wire that’s dirty or lose!
primo tengo una dodge ram 99 3500 prende y dura prendida 10 min y c apaga y ya no prende y la dejo para otro dia y prende pero hace lo mismo no ce si pueda ayudarme
aaron rios Sácale el diésel y ponle diésel nuevo, ponle diésel de las gasolineras donde los trailes van Tengo otro vídeo y le paso lo mismo a mi dodge 2001,por ponerle diésel en una tienda que compran diésel barato!! En las mañanas prendía y la manejaba por 10-15min y se apagaba y no prendía!! Me esperaba unas horas y prendía un rato!! Ya nomas el motor se calentaba y ya no prendía porqué el diésel estaba muy delgado!! Le saqué todo el diésel y prendió y se quedó prendida ! Eso es lo más barato que puedes tratar
I don’t give my info sorry, plus I don’t know to much I just know a bit, but ho ahead and say your question here I may be able to answer it or someone else
What it really was, it was the connectors teeth, it was bent up and wasn’t making any contact !! Just bend it back, open it I think I have a video about it
Your video just saved my A$$ you are a blessing from God
The engine ECM fuse was good, what was bad it was the connectors, the inside prong teeth whatever it’s called, it was bent up, and wasn’t making contact!!!
Thank you so much for your video. You just saved me. I was stranded in the middle of nowhere, and thanks to your video, I found that the fuses in my truck were corroded by water.
Also check the batteries, if one is not sending 12v then the ECM will fail
Bro you are a lifesaver oh, thank you so much!
Check all the wiring by the batteries, clean all the post, check wires if they are dirty, wiggle the wires and see if the truck turns off if it turns off theirs a wire that’s dirty or lose!
Hi my name is Greg do they have a limp mode on the caterpillar it could be on if you need to reset the computer
primo tengo una dodge ram 99 3500 prende y dura prendida 10 min y c apaga y ya no prende y la dejo para otro dia y prende pero hace lo mismo no ce si pueda ayudarme
aaron rios
Sácale el diésel y ponle diésel nuevo, ponle diésel de las gasolineras donde los trailes van
Tengo otro vídeo y le paso lo mismo a mi dodge 2001,por ponerle diésel en una tienda que compran diésel barato!!
En las mañanas prendía y la manejaba por 10-15min y se apagaba y no prendía!! Me esperaba unas horas y prendía un rato!! Ya nomas el motor se calentaba y ya no prendía porqué el diésel estaba muy delgado!!
Le saqué todo el diésel y prendió y se quedó prendida !
Eso es lo más barato que puedes tratar
aaron rios ve mi otro vídeo de la dodge
I’m looking to buy a used f650 might have some battery issues does it have 3 batteries?
Mine does have 3 batteries, but some have 2 the older trucks
Mine is an 05.
Where's the starter at on this vehicle
Driver side, bottom of engine
i have c7 and have fuel delivery problems. will it be best to replace the heui pump or the fuel transfer pump
Does it give you any codes?
I have a c7. I have questions for you. Is there a way I can contact you?
I don’t give my info sorry, plus I don’t know to much I just know a bit, but ho ahead and say your question here I may be able to answer it or someone else
What other problems has the c7 gave you?
Nothing, big, only sensors, I changed the cups, and since the injectors where out, I replace the O rings
Primo a una cosa más el reley se calienta de el fuel es normal eso
aron rios
Todos los relays se calientan cuando se usan !!
Chequea la pompa que el positivo no esté tocando tierra
Thank you sir!!!!!!!
What it really was, it was the connectors teeth, it was bent up and wasn’t making any contact !! Just bend it back, open it
I think I have a video about it