@@thebandit1974 all good buddy! It’s a radio link Rc6gs that I added a range extender too, which is basically a regular household Wi-Fi, booster a.k.a. signal booster a.k.a. Range booster but out of the box with no extender you can get awesome range. Also just with a bit of delay.
Great job on the 89mph run! Hey I’m a newbie here and I put a brushless motor in my tamiya tt01 and it ate the spur gear and pinion. What are you using if you don’t mind me asking. Thank you!
Thanks buddy👊 so the stock style gears work great and can handle the 120mph + … but gear mesh and driving style are huge contributors to that issue, hard accelerations from dead stop and hard braking will chew them up . But what you can do is modify the Tamiya TTo2 speed spool hop up part for the spur gear. Then run aftermarket spur if you’d like but the motor mount is the hardest part of the tt01 for meshing the gears properly and it will eat spur gears like cookies if it’s off even a little. Also I found that making sure motor mount is seated into chassis is a big one too. What you can do to check this is take motor mount out of car then place the top plate on chassis with no screws in it make sure it sits on chassis flush with no force needed , then if the top sits clean, install motor and motor mount. Then make sure top plate sits just as clean on chassis. If not , then you have to just find what is keeping it from going into position properly . Hope this helps buddy and Thank you! Good luck with the TT01 !👊👍👍
"Nice lookin body, cept that it's Mercedes" haha, my guy! So, I just noticed from some on board run footage (different channel) that the nose is pushing down at high speeds that could cause a catapult at some point. I think I have the goods to hit 100mph now, just think I might need to add a splitter, or something to the bumper to stop it from bending. looks like the side rails and tape are non negotiable above 70ish as well. (sigh) off to the hardware store..
Yes that can cause many issues, however you can support it , is good. And ya definitely don’t want the sides of the body to open up and parachute on ya. For sure! Thanks buddy!👊👍👍even though with all of that there is no guarantee of it staying on the ground sometimes it just happens😂
@@mitchellminer4596 Lol, facts! I just solved the nose problem with some spare body post bits shoved down into the foam and pinned with washers to keep it firm.. And just got back from Ace with some door sweep material that's perfect for side guards. Have fun and God bless!
Because the car didn’t have a tamiya chassis , it was an all carbon fiber and modified tt01🤷♂️ all good though as stated in my first entry , I wasn’t sure if the car was going to be accepted…… but poor boys did except it however, other participants felt as though they were at some disadvantage. And decided to heckle and harass me , even go as far as making a video about me and try to have me removed from the competition….! However they have the same opportunity to upgrade /modify their vehicle, the same as mine🤷♂️ but I’m not looking for handouts and don’t need anyone telling me I have some sort of advantage so I’m just eliminating the issue and game on!👍👍👊
Thanks buddy!👍👍👊 well let’s just say I agree with you but there was a few people that highly disagreed, and did not think that it was fair to run that chassis
Hey if you don't need that hobbywing can I take it off fortunately I don't have money to pay you for it need to use it on another car after I finish my wild one.
Definitely woulda made 90 is it wasnt for the duck turds..sounded like a plow pushing snow down the highway 😂. Lighter car now its faster..them smaller cars look so fast ...putting in that work will get ya to the top👊👊
Yeah it was turd city 🤣 must have been 400 ducks there at some point this week! Nasty🤢! fresh build covered in poo on its first outing 😡🤣 and copy that on the work! Can’t wait to see where it go’s from here!!!! Thanks brother👊👍👍
You’re flirting with those triple digits
Ridiculously awesome man
Slow and steady wins the race! 😬 Thanks buddy!👊👍👍
D@MN Mitchell! Nice runs right from the start!!!! Nice work!
Greatly appreciated buddy!👊👍👍
Dang now that is a Real Tamiya 🤣🤣Awesome run Mitchell keep it going
👊👍👍Thanks Kurt!
Very cool, both cars're spped beasts. 👏👏👏
Thank you! Greatly appreciated!👍👍👊
Awesome runs! You're at the top now! I imagine you'll definitely be breaking 100 soon. Good luck!
Thank you buddy! I surely will do my best!👊👍👍
Awesome! Respectable result 🎉
Thanks buddy👊👍👍
Great runs. Looking good with the merc.
Thank you! 👍👍👊. I have to say she is lookn pretty darn good, when I finished it I sat back and said “man I hope you’ll go as fast as you look”🤣
@@mitchellminer4596 sorry, can I ask a novice question? What transmitter are you running to get such a great range?
@@thebandit1974 all good buddy! It’s a radio link Rc6gs that I added a range extender too, which is basically a regular household Wi-Fi, booster a.k.a. signal booster a.k.a. Range booster but out of the box with no extender you can get awesome range. Also just with a bit of delay.
@@mitchellminer4596 thank you
May have to steal your aluminum angle idea there brother! Awesome runs!🤜🤛💯
Steel away and shout it out, it’s definitely a must do! Thanks man! 👊👍👍
@@mitchellminer4596 will do brother!.. thank you!🙏
Awesome run brother! Can’t wait to see where you take the new car!
Thank you buddy! Can’t wait to get back out again! 👊👍👍
Love your videos I hope we can even get close to you. Can't wait to see the new car run!
Thank you very much buddy! 👍👍👊
Awesome! Loving all these run videos. Can't wait to see how the new one progresses too (without the duck crap) 😂
🤣😂it was a very 💩💩’y situation😡🤣😂! Thanks buddy!👊👍👍 should go much better without the boulders🤣😂
Nice work, my man! And kudos to you for building an entire new kit and getting it up to 89. Unreal, dude! I'm still struggling to hit 40, lol!
Thank you buddy! Having a blast with the comp so it’s all worth it! And keep pushing man!
you and me both Fil
@@mitchellminer4596 89mph dude thats awesome may i ask what gearing combo you've chosen or is that a secret🤣
@andrewmagro7703 Thanks buddy!👍👍👊
Great runs on both cars
Thank you buddy!👍👍👊
Amazing sound 😁Good run 😊I know you can top the 89. 👍👍👍
Thanks Buddy👊👍👍 we shall see!
I need to learn to finish the video before I comment lol Great Runs!
🤣🤣😂I was confused on that one for a min🤣 all good buddy! It happens 🤣😂👊👍👍 Thank you !
😂😂😂
Great job on the 89mph run! Hey I’m a newbie here and I put a brushless motor in my tamiya tt01 and it ate the spur gear and pinion. What are you using if you don’t mind me asking. Thank you!
Thanks buddy👊 so the stock style gears work great and can handle the 120mph + … but gear mesh and driving style are huge contributors to that issue, hard accelerations from dead stop and hard braking will chew them up . But what you can do is modify the Tamiya TTo2 speed spool hop up part for the spur gear. Then run aftermarket spur if you’d like but the motor mount is the hardest part of the tt01 for meshing the gears properly and it will eat spur gears like cookies if it’s off even a little. Also I found that making sure motor mount is seated into chassis is a big one too. What you can do to check this is take motor mount out of car then place the top plate on chassis with no screws in it make sure it sits on chassis flush with no force needed , then if the top sits clean, install motor and motor mount. Then make sure top plate sits just as clean on chassis. If not , then you have to just find what is keeping it from going into position properly . Hope this helps buddy and Thank you! Good luck with the TT01 !👊👍👍
DAMN!
😂Thanks buddy!👍👍👊
💯💯👍👍
Thanks buddy!👊👍👍
"Nice lookin body, cept that it's Mercedes" haha, my guy! So, I just noticed from some on board run footage (different channel) that the nose is pushing down at high speeds that could cause a catapult at some point. I think I have the goods to hit 100mph now, just think I might need to add a splitter, or something to the bumper to stop it from bending. looks like the side rails and tape are non negotiable above 70ish as well. (sigh) off to the hardware store..
Yes that can cause many issues, however you can support it , is good. And ya definitely don’t want the sides of the body to open up and parachute on ya. For sure! Thanks buddy!👊👍👍even though with all of that there is no guarantee of it staying on the ground sometimes it just happens😂
@@mitchellminer4596 Lol, facts! I just solved the nose problem with some spare body post bits shoved down into the foam and pinned with washers to keep it firm.. And just got back from Ace with some door sweep material that's perfect for side guards. Have fun and God bless!
What are peoples issue with the original car??
Because the car didn’t have a tamiya chassis , it was an all carbon fiber and modified tt01🤷♂️ all good though as stated in my first entry , I wasn’t sure if the car was going to be accepted…… but poor boys did except it however, other participants felt as though they were at some disadvantage. And decided to heckle and harass me , even go as far as making a video about me and try to have me removed from the competition….! However they have the same opportunity to upgrade /modify their vehicle, the same as mine🤷♂️ but I’m not looking for handouts and don’t need anyone telling me I have some sort of advantage so I’m just eliminating the issue and game on!👍👍👊
Are you going to eventually paint that body?
No, probably know if my son wants me to keep a clear
Nice on the 89! well disserved. Why would that car be unfair? Rules said any hop ups.
Thanks buddy!👍👍👊 well let’s just say I agree with you but there was a few people that highly disagreed, and did not think that it was fair to run that chassis
There are so many Variants of the TT02, The Type S,R,RR,SR,and the SRX I am glad you did not give up. it's all for just for fun .@@mitchellminer4596
@@JoevsRc there’s always one in every crowd to attempt to take all the fun out of it👊👍👍 can’t let that stuff hold ya back though! thanks buddy!
I know this is a old video but you are right you got nothing but faster.
Thank you buddy!👊👍👍Greatly appreciated!
Hey if you don't need that hobbywing can I take it off fortunately I don't have money to pay you for it need to use it on another car after I finish my wild one.
I was actually thinking of using it in my dad‘s old super shot- original 80s to tamiya but if I change my mind, I will let you know
Definitely woulda made 90 is it wasnt for the duck turds..sounded like a plow pushing snow down the highway 😂. Lighter car now its faster..them smaller cars look so fast ...putting in that work will get ya to the top👊👊
Yeah it was turd city 🤣 must have been 400 ducks there at some point this week! Nasty🤢! fresh build covered in poo on its first outing 😡🤣 and copy that on the work! Can’t wait to see where it go’s from here!!!! Thanks brother👊👍👍
You tied it with the other car.
Thanks you!👊👍👍
Definitely fastest In jersey.
😂🤣 🤷♂️ we shall see! May the fastest car win! Thanks Josh!👍👍👊