Perfect example of modern craftsmanship! I love your improvised solutions for cutting the foam, roller for the tubing etc. Thanks for showing the whole process :)
You should put the cold water pipes closer to the ground beneath the isolation, that way you will have cold water in the tabs right away as you are doing it you will have to empty the pipe before your water is cold.
So clean work :). I wanted making the same for my house in PL, but it turned out that we have 80-90cm of rich black soil, and replacing it with a gravel would cost a fortune, so went for traditional foundation. Your work is impressive! One comment however, this is also a common mistake here: based on the weight and color of the sewage pipes you used a „foam” type. They have thin layer of plastic from inside and outside and foam inside between. They are cheap but don’t warrant long life. Only solid pipes (heave, expensive) shall be placed under the concrete slab.
Are you able to substitute steel rebar with fiberglass? It is a little cheaper and much lighter to work with. Use 10m for the bends. I was told they work together well.
Amazing work! What is the name of the type of plastic screws you were using to join the rigid foam insulation. Please advise. I've been looking for those for years, here in Canada. Thank you.
Can you please explain why you used thin metal grid right over XPS sheets? That foundation works well with drainage on the perimeter. I guess you'll make it later.
Frost heave protection, they do the same or similar in loads of northern US states also where you often have to lay sheets of insulation around the outside of the building also. It stops the ground water freezing the footings & causing the freezing to lift the building & causing cracking also.
orange one is called KG-pipe (size looks like DN100/110), grey one is called HT-pipe (high temparature as in boiling water) and used inside buildings and slabs. KG is thicker than HT
30см эппс для утепления пола, перебор,при разнице температур земли под домом и внутри дома в 15-20 градусов это пустая трата,там 10см более чем достаточно, а вот на стены-потолок слой в 20-30см в самый раз бы
We all do it this way. With hydronic underfloor heating you need proper insulation during the winter months in Sweden, to not have a house that is radiating heat into the ground to no use. This way the heating costs go down and you need less electricity to heat the water.
So clean work :). I wanted making the same for my house in PL, but it turned out that we have 80-90cm of rich black soil, and replacing it with a gravel would cost a fortune, so went for traditional foundation. Your work is impressive! One comment however, this is also a common mistake here: based on the weight and color of the sewage pipes you used a „foam” type. They have thin layer of plastic from inside and outside and foam inside between. They are cheap but don’t warrant long life. Only solid pipes (heave, expensive) shall be placed under the concrete slab.
Perfect example of modern craftsmanship! I love your improvised solutions for cutting the foam, roller for the tubing etc. Thanks for showing the whole process :)
Nur das diese Methode überholt ist. Ich heize nicht mehr den ganzen Beton der Bodenplatte auf!! Für was auch?👎👎🇩🇪
What a work of art. It's like the Mona Lisa of foundations ❤
Craftmanship through experience 💪💯👏
You should put the cold water pipes closer to the ground beneath the isolation, that way you will have cold water in the tabs right away as you are doing it you will have to empty the pipe before your water is cold.
Perfect slab on grade, we also call it Alaska slab foundation. This is how highways are constructed in colder regions. Great craftsmanship
Love your format and your skill. Keep eep the vids coming.
Thank you! 🙏
Why the metal strip in the beginning ??
Grounding ruclips.net/video/qz7sQ1GF_x4/видео.htmlsi=hYgDqf7dyhzjTfqJ&t=275
It is lightning rod
⚡️ ⛈️ Potenzial Ausgleich
Grounding strap
Hard way to do a ground and compromising the footing
What is the purpose of this metal strip underground, below the foundation line?
Amazing how the building practices are so different around the world. Will last 10 lifetimes for sure.
Amazing, great job!
AAA Builder!!! My Deeply Respect. 👍👍👍👍👍 & SUBSCRIBED!!!
Thanks 🙏
That is an intense slab/foundation! Very nice
Nice Good job👍
Sieht gut aus 👍🤗
I was wondering why the mesh wasn't being chaired up. As my father said many times, be quite and watch. Mesh for grid, rebar for reinforcement.
Love the little helpers
εξαιρετικη δουλεια φιλε μου! Ευγε..!
Awesome video! Great work, never seen this type of foundation
So clean work :). I wanted making the same for my house in PL, but it turned out that we have 80-90cm of rich black soil, and replacing it with a gravel would cost a fortune, so went for traditional foundation. Your work is impressive! One comment however, this is also a common mistake here: based on the weight and color of the sewage pipes you used a „foam” type. They have thin layer of plastic from inside and outside and foam inside between. They are cheap but don’t warrant long life. Only solid pipes (heave, expensive) shall be placed under the concrete slab.
Please keep doing videos on this project!!!!!!
Are you able to substitute steel rebar with fiberglass? It is a little cheaper and much lighter to work with. Use 10m for the bends. I was told they work together well.
Amazing work! What is the name of the type of plastic screws you were using to join the rigid foam insulation. Please advise. I've been looking for those for years, here in Canada. Thank you.
Can you please explain why you used thin metal grid right over XPS sheets?
That foundation works well with drainage on the perimeter. I guess you'll make it later.
Офарин гап йук 👍
What did that slab cost you to build. I live in Canada and thinking of doing a similar type of construction.
Beautiful work, but, why the metal strip at the beginning--do not understand that one.
Same
Me either - why the buried metal strip???
The structure is completely insulated from the ground so…. You need an artificial ground for all your electric wiring and also lightning strikes.
Cool, Thanks : )
Only took 50:12 minutes amazing!!!!
Perfect. You have a clue
Very interesting. What was the vibration engine model please
cool design and love the use of eco materials.
Great job, real craftmanship, bravo.👍👍👍
Thanks!
@@DmitryLukinDIY что это за красные и синие шланги?
@@DmitryLukinDIY what are all these red and blue hoses?
@@alexandrevillar1260 At the plumbing stacks, they are hot and cold water lines. In the floor, they are for heating.
Bit late to check the pipe for no leaks with all that rebar over it?
Warum werden die hell-grauen Schläuche diagonal verlegt und nicht längs oder quer?
@dimitrydiy What did you use to create a channel in the foam for the tubing? 21:59
Looks like he made a heated loop out of bent wire and electricity.
Great idea. The only problem is- you have to plan everything before you pour the concrete. There is a zero chance to move anything around later.
👍
But, it's sure it is Sweden? How is anchored, the house, on the Sand?
Or under there is a fondament in reinforced concrete?
Not Sweden, higher/more isolation in Sweden before concrete. And of course other differences too
сколько в кубометрах заместили выработанного грунта
на что заместили
сколько стоило
спасибо
Скажите пжлст что за полоса металическая по всему периметру здания и внутри под гравием это заземление?
Да
I Liked it a lot.👍 hope you get as much subscriber as your back pain. 😁🌹
Why not making the concrete in first place nice and smooth, instead grinding afterwards
Just curious, why you place the insulation outside the floor?
Frost heave protection, they do the same or similar in loads of northern US states also where you often have to lay sheets of insulation around the outside of the building also.
It stops the ground water freezing the footings & causing the freezing to lift the building & causing cracking also.
Frostschürze heißt das!!!!
Avoiding thermal bridging
Also to prevent floor heating to warm the dirt ground. Otherwise it could draw moist up in the flloor.
Gdzie można zobaczyć dalszą część tej budowy?
What is the metal strip buried at the very start of the video
this is the foundation earth
Congratulacions great job.! What brand are the plastics screw?
Rgds from Chile.
Thanks! Technonicol
What is the name of this sewer pipe? Is it available in the USA?
Ostendorf
orange one is called KG-pipe (size looks like DN100/110), grey one is called HT-pipe (high temparature as in boiling water) and used inside buildings and slabs. KG is thicker than HT
А как же грызуны, под плитой?
Our inspectors require a 2 foot/ 600mm lap on rebar laps.
So try this on clay soils.
all this just to pour concrete on it??
Рунет потихоньку захватывает чужие рынки😂
Вперёд!
Не в осуждение просто судя по тому что нет инструмента получается очень долго строить? Правильно понимаю
Строить даже с инструментом не быстро...)
@@DmitryLukinDIY логично
This dude does not like being cold
MOLODEC RESPEKT IZ LITVI LAIK I PODPISKA VSEGDA CHOTEL PRO ETO UZNAT, NO ETO VIDEO BOLSE CEM TEORIJA
не давай ребенку закручивать шуруповертом шурупы . Spass muss sein , aber kann die Hände Verletzen , habe Erfahrung .
I liked it because there where no dogs. The interested child was very nice. I am afraid that mice or other animals will use your isolation.
This is not Sweden.. We dont work in sandals.
Our sub-sub-sub-contractors from eastern europe might..
Its not foundation, its insulation....
30см эппс для утепления пола, перебор,при разнице температур земли под домом и внутри дома в 15-20 градусов это пустая трата,там 10см более чем достаточно, а вот на стены-потолок слой в 20-30см в самый раз бы
Да, да, только вы считаете разницу земля-дом, а надо считать земля-труба ТП и тут уже другая разница.
@@WladimirGalkin температура земли +4, температура теплых полов 28-30, и даже в этом случае разница 25 градусов, вообще не очем
@@ton9as925 Ну давайте посчитаем, я буду считать для своего региона - Иркутск. Получилось 277мм
@@ton9as925 Да, ни о чём, но в требуемое сопротивление не вписывается.
Ну чет я тож так подумал, что столько утеплителя закопать. Хоть и не спец в этом, но с дивана виднее)))) за работу однозначно огромный лайк.!!!
Мужик, купи молоток! Ну наконец-то, на 38 минуте стал работать молотком, не как олень.
To many panels, I wouldn't do it that way. It appears to be a racket to make money of selling the panels.
We all do it this way. With hydronic underfloor heating you need proper insulation during the winter months in Sweden, to not have a house that is radiating heat into the ground to no use. This way the heating costs go down and you need less electricity to heat the water.
🏗️🕌🕌🕌🕌🕌
Child's play.
Just diy copy of warmform product....
Why hasn't Ikea made "flatpack" homes yet!!😆
So clean work :). I wanted making the same for my house in PL, but it turned out that we have 80-90cm of rich black soil, and replacing it with a gravel would cost a fortune, so went for traditional foundation. Your work is impressive! One comment however, this is also a common mistake here: based on the weight and color of the sewage pipes you used a „foam” type. They have thin layer of plastic from inside and outside and foam inside between. They are cheap but don’t warrant long life. Only solid pipes (heave, expensive) shall be placed under the concrete slab.