What Tools you need to start In Heavy equipment repair
HTML-код
- Опубликовано: 10 фев 2025
- If you're looking to get in to heavy equipment repair. This is what you need for tools to start. If you have any thing to add to this video please comment below. it doesn't need to be all snap on to start. you can buy and brand to start. if you are looking to get in to working on construction equipment as as mechanic or technician check this out Thank you
As a retired heavy equipment mechanic, the most important and versatile tool is the torque multiplier.
Thank you
What brand do you recommend sr?
@@automotivetech7590 otc or snap on make some good ones I have used.
I made it my personal habit that if I had to borrow from another tech more than once I was going to buy whatever the tool was as soon as I could. I also made it my policy not to continuously loan to a guy that has money for cell phones , eating out everyday, and partying every weekend but won’t buy tools. Got no time for leeches. It’s not hard to spot the guys that are trying to improve their inventory and I’ll help them any way that I can. Almost every shop has at least one guy that wants to make his living out of everyone else’s toolbox.
You gave sound advice. Newbies need to understand that it takes years of work and sacrifice to build their tool inventory. It doesn’t happen overnight.
Wayne Swicegood thank you I appreciate the comment 👍🏻👍🏻
I agree 100%. My rule of thumb has always been: If I need to borrow it twice, I need to buy it.
I always kept a notepad on top or in the main drawer that had a list of tools borrowed/needed. I would mark how many times I borrowed. The more you marked a tool borrowed, the sooner you needed to borrow and the higher the quality needed
Young guys, don't blow your wad on a huge tool box that you'll be paying $20 a week on for 10 years.
Buy a roll cart, fill it up. Get a top box, fill it up. When you're ready buy another roll cart. Get some angle iron, build a frame both carts will fit on. Put some heavy casters under it.
If you ever make the move into a field truck you'll be glad you don't have 10 grand wrapped up in a tool box.
Pure gold man
Could also buy a matco/snap on roll cart and go with a husky, Milwaukee, or us general box.
Hell yeah
Yes sir. On point. I started with a 48" double bank Matco. It was everything I needed until I left a truck to be a service manager. At that point, I had to store a truck load of tools up against a wall. The box has moved twice and drawers have been opened very few times. Especially since I'm back in a truck again.
Good advise on the carts
@@offroadwrench5752 would u sell it? Lol
6 years in industrial maintenance. Working on production equipment. 3 phase servo and gear motors, PLC’s, nips, HPU’s. Etc.
I’ve thought about switching to something like this. Don’t mind the equipment.
But get tired of dealing with lazy unskilled production workers who call me over to press a reset button.
Only skill I really lack is I have never had opportunity to learn welding.
Enjoyed seeing what you’ve got. I have many of the tools you have though not in so much abundance.
This is literally my experience as well
“Best tool for the money” that’s the best piece of advice I’ve heard on tool buying.
Two dislikes? Must be Tool Truck owners because this video was excellent and on point.
Lmao must have been. Thank you
I just started my First equipment technician job last week I’ve been operating for about three years I work at Sunbelt rentals now and I can say a great start for me was a Kobalt kit at Lowe’s it has everything you need to get decent start don’t stress about not knowing what to need right off the bat you’ll slowly realize what you’ll need but one thing I highly recommend going ahead and getting is a electric grease gun you’ll thank me later
I recently left the car mechanic world to Ag and my experience is obviously bigger sockets and wrenches but it’s mostly cordless electric! Never saw myself getting a 1/2 electric impact but always being on the move either in the field or even walking around a big combine or tractor not dragging an air hose is night and day.. added a locker on to my 84” epic to store some tool upgrades I needed.
Ya man it is nice to be cordless some days. Congratulations on the move
Best suggestion was the fluke! I have the same model and I love being able to remove the screen and operate the tractor and watch the voltages. Most important tool I have bought. I'm a John Deere field mechanic
It’s a great meter for sure.
Can you please make a video about tools you use to make things easier on your body. I have an older mechanic in my shop and id really like to spend money on making his job easier physically.
Great video brother greetings from the United States Virgin islands in the carribbean st.thomas Us territory I have 9 years of heavy duty truck and equipment experience my dad taught me most of what I know so far he was a diesel mechanic he passed away last year and now I am going to build on what he taught me and get my CDL soon and become a certified diesel technician thanks for the info and God bless and be safe out there keep wrenching
sorry to hear about your dad man. yes use all that knowledge you have gotten from life and him build on it. you have a head start on a lot of people out there man. keep that iron moving. Thank you for your support and watching.
Fantastic video. To start that's everything you'll need. People starting our need to realize, your going to be working with someone 98% of the time. They have all the tooling. The stuff you'll be doing on your own. Won't require alot of tools. The only thing I would mention getting. A set of torx bits. Depending on what make. Cat uses alot of torx fasteners on dashes and interiors. That's all I have to mention. Awesome video man. Hopefully this will keep alot of kids out of major debt.
Matthew Helm thank you those torx bits are a good suggestion to thank you for the great input.
I agree with you buy the quality over quantity every time. After 28 years, you'll have the quantity. Good advice
Thank you
great advice I had master technician was just like u he help me and trained me bin doing it 20 years now at Caterpillar great video thanks
Don't spend a lot of money on air tools. This industry is moving toward cordless electric. Look at Milwaukee's M18 line specifically.
I would recommend air in shop because you don't have to charge or change batteries i have both and I use battery on road and air in shop
HeavyMetalMechanic Generally yes, but some things still need to be air, die grinders I’m thinking of especially, and as far as I know no one does a battery hammer. Won’t be long though!
@@andygilbert1877
A battery powered die grinder would be fantastic.
HeavyMetalMechanic Milwaukee has an M12 battery die grinder. Everyone at my shop has them and we all use them every day. Highly recommend
Yeah the damn hose is always 3 ft to short, the ends always go out and you've gotta wait for the compressor to fill
Good suggestions. I agree with the tool cart. I started with a 48" Matco two bay with a full width top drawer. I now drive a 14' Knaphiede around and my big box sits in the garage and is one big junk drawer. I'll have a video on that one later. If you want to be a shop mechanic, you'll eventually have a big tool box with all the bells and whistles. If you're wanted to be in the field, you will regret buying a big box with a lengthy payment structure. Start with a 48" or less box that fits well at home in the garage. You dont know where you'll end up in 5 years.
This is so true. I had a krl1022 then I went into a service truck for around 11 yrs or so. when I decided to go back in to the shop. when i decided to get out of field service and go in to the shop.I had the 1022 sitting at home but that filled up so quick it wasn't funny. Shortly after moving in to the shop I added a hutch and locker to it.Then it was still packed to tight for good organization. so that's when i went to the 84 inch epiq that i have now. this is true when starting out or any advice i have is don't get a bigger box until its packed to the point that you cant get to things easy.
When buying pry bars get them in pairs
For equal force
Great suggestion. Thank you.
well in my experience. When once you get hired, talk to the shop's foreman and get the required tool list and recommended tools then evaluate if you need a tool cart or a tool box.
Excellent video 👍 👌 I been a heavy equipment mechanic for 32 year's you told a new hire right
thank you for that i appreciate the support
I like your mentality on lending out tools I’m the same way, some guys can be real weird about.
Thank you. They can and I do lend out a lot. When I can’t keep track of who has what. I use a check out sheet to keep them from getting misplaced.
I dont mind lending tools... but i dont want to hear you bragging about how long its been since youve had a bill on the tool truck...
Was just talking to a coworker today, we only use about 20% of our tools, it’s really changed in the 35yrs I’m been doing this
It’s crazy but we need them all lol.
You hit the nail on the head. So many guys come into this industry and get discouraged because of these old guys that are set in their ways. I love being the guy that loans tools or helps guys out. The only thing that annoys me is when I see the guys I’ve loaned a simple tool out to get on the tool truck and run their account up buying bullshit. Don’t come borrow a 3/8 impact swivel from me when you just spent 500 bucks on the tool truck buying shit that is out of your skill level. Love your videos!
Thank you I appreciate the feedback it’s great to know guys like you are out there as well.
Glad to see a heavy equipment channel, great video man keep up the good work
Thank you will do
Thanks for the advice. It's hard to know what to spend limited resources on and what to prioritize when starting out. Also thanks for remembering the girls getting into the trade! It's nice to hear that.
It’s an open industry for everyone in my mind. As long as you are willing to work hard and continue to learn. that’s what really matters.
Good video!
I started my first equipment mechanics job after leaving the military with a 2 drawer carry around Craftsman box with a basic DIY-er assortment of mechanics hand tools my Dad gave me when I was 16. That was 25 years ago. There's now an Epiq wall of tool boxes in my bay of the shop I lead / manage, mostly stuffed full with the exception of a couple drawers of the last box I bought.....
On a side note: as a pro mechanic and supervisor of others, I have a problem with mechanics who wear a wedding ring. My wife got over my not wanting to loose a finger over her 30 years ago....
Well first of all thank you for your service. I really appreciate it. I do have family and friends who have and are serving now.
It’s awesome what a little motivation and discipline can do isn’t it. That’s great I would love to see a pic of your set up.
At my shop we do have a company policy that no jewelry should be worn in the shop. I do my videos in the shop before work usually and my ring gets put on my key chain until I punch out for the day. I have worn the rubber rings but the ones I got the spirits and oil swelled them. It’s definitely a safety concern and hazard.
@@theheavywrench9549 as long as you are aware and careful, I just see too many guys get in a hurry, myself included, which is why I just stopped wearing it altogether.
Keep up the good work!
DocRevo Good advice! It was a complete no-no wearing rings or a watch when
I started 44 years ago. I’ve seen a guy short out a battery with his steel watch, not a pretty sight. Watch wasn’t too happy either!
@@andygilbert1877 it is a dangerous game with a ring that is sad you have seen a guy experience it first hand
I like the way the cart is laid out. I always left top part open for the most part. Our carts otherwise are set mostly the same
lmbakerracing awesome I like it great minds think alike lol
I like the milky blurry effect you were going for with the camera lens
Great video man! I work for a Cat dealer and one thing I would add is to go with the wobble sockets. At least a 3/8 metric set. With the bigger hydraulic flange fittings, the hoses sometimes route where you can’t get a straight socket on. Also a 3/4 breaker bar (or impact if you have the money) is a must for me. I have a 40” harbor freight/northern tool brand one and it’s been rocking for years.
Awesome suggestions. thank you for the input I would agree with the wobbles and the breaker bar for sure.
I had some of those cheapy 3/4 breaker bars and broke the snot out of them caughed up the mulah and bought a Mac one been going strong even using a backhoe to apply leverage after hot wrenching the fasteners lol
Matco pinless universal impacts are the shit
Work for a cat dealer in the power generation side. My 3/4 impact hardly gets used anymore.. and I'm not mad lol
Been in the industry since I was a child operator and mechanic! Cordless and metric on 1990 and later all. Laptop and property software on all major brands... ball Allen's break off ball in fastener faster! In doubt ask before you screw up! Work in a qualified shop if possible go to school and keep learning ,the industry is constantly changing . Multimeter is the standard free -ranging !
3/8 Milwaukee Stubby Impact Wrench with some universal sockets is my go to. That little impact can get into some tight places for hyd. lines. With 250 ft lbs it will break most bolts free. A set of angle wrenches or crows feet is a life saver in some cases
that is great suggestions thank you
I’m glad you didn’t say a bunch of specialty tools or 3/4 drive lol a lot if guys think they gotta have it starting out but basics are plenty and it all depends what kinda equipment you work on, if it’s dozers and mining equipment it’s gonna be big stuff but if your at bobcat or a smaller equipment dealer won’t need as much bigger items above 1in1/4 size
Thank you. You are correct it takes a lot to get set up for what you do
Great video, Especially for those just starting out. The only thing I would add is a temperature gun. You can diagnose / trouble shoot a lot of things with that little tool. I work on Tugs, cranes, & heavy equipment for my paying job, & tractors/ implements on the farm. Keep the videos coming, I’m looking forward to it!
Absolutely a great suggestion. thank you. I would have to agree that is a must get for diagnosis of a whole lot of things. These are the comments that really help people out. Thank you again
I agree! Just retired myself at 61 and only bought one 3 years ago. Wish I’d had one in my younger days, though they were mega expensive then.
Knipex pliers wrench has replaced all my adjustable wrenches. In fact I don’t even own one anymore lol.
they get a hole lot of use by me. the gripping force is amazing
Adjustables are great for straightening stuff though!
You can take apart a modern cat with a 10, 13, 16, 18mm and maybe a few hex heads
Lol yep.
So true
Retired now, but my rule on borrowing was I’ll help you out if I like you. However, no-one (and I mean NO-ONE!) goes in my boxes but me. I also afford everyone else the same courtesy. If you ask to borrow something 3 times then you need to buy your own, applies to me too. Then we’re all cool. :)
Great video man I’m studying diesel at my local tech school and trying to balance high school along with it! I’ve got a big interest in going into heavy equipment so this was just what I needed!
Awesome👍🏻. Keep at it. this is a open field of opportunity
Thanks for the video. Currently applying looking for apprentice programs. Also applied at a few tire shops get me shop experience and hopefully move on to Diesel truck and equipment. I Appreciate the video
Good solid advice…especially with the cart
Excellent video! I would say for the beginner just starting out buy smart ! To this day I always ask my tool rep what he has used on the trk ! You can really get some good deals ! I would add sunex brand tools inexpensive and warrantied! Harbor freight impact sockets cheap jumbo wrenchs and angle wrenchs for hydrolic repair. The bulb for load testing a circuit is excellent advice! Great stuff thanks for sharing 👍
that is a great way to build your tools up as well. thank you for the input.
Great video! Appreciate the info, I’m 18
starting out as a diesel mechanic for caterpillar and looking for tools and trying to grow my knowledge.
I'm looking to do the same thing how did u get to work for cat
great video thanks for the info going to diesel tech at 40 thought now is a good time for a career change
"El Cheapo" as you called it sockets and extentions are great to have for that day you have to make a tool in the field. I have a bag of garage sale sockets on my service truck just for the day I have to weld a socket onto something or split the side out of a socket. It sure hurts a lot less than using something you spent a bundle on off the truck
What about 3/4" drive impact sockets/Pnuematic impact wrenches. Do you use 1" impacts? Just seems like 1/2" for 'heavy equiptment' may not have the sizes you need given they usually max out at around 36mm. Can you get buy with just a half inch gun?. Thanks.
The White is beyond awesome and way easier to see in the drawers - like to have the white with orange trim!
That would be an awesome look.
Hi The Heavy Wrench,
Great video you have produced here, I really enjoyed it, great content. I particularly enjoyed the whole video describing your whole tool kit starting at 1:00. Also talking about tool cost. I felt it was really informative and you really brought the point across well. Your point at 15:00 about volt drop and use of a test lamp is regularly overlooked and not often understood. I am really interested in engineering and have had a career in engineering for over 28 years from everything from starting as a mechanics assistant to now a Project Manager. I enjoy sharing my skills and knowledge as well with others like yourself. I have provide training to others and had apprentices work with me to kick start there careers. I have started my own channel to share some of my knowledge. I thought your video was so good that I have subscribed and look forward to other content. Many thanks, Great job.
Thank you I appreciate it feel free to message me on Instagram if you would like to collaborate on something
Great video! I agree with you on 99% of everything, I'm not an expert yet but maybe some day. What I reccomend is spend the money up front and get some high quality tools that you use everyday. For me those are snap on and mac. The important thing to think about is product support- if you don't have tool trucks in your area, don't spend the money on those tools. I've got plenty of cheaper tools that I don't use everyday. Another thing I'd like to put out there is when it comes to specialty tools, there aren't many cheaper options available so unfortunately I've had to bite the bullet and go with snappy or mac. Also, like what was said in the video, don't get a massive tool box right off the bat. Right now I have a roll cart that's overflowing and a 72" 30" deep snap on master series that is full as well. Gonna have to get a top for it soon. Don't worry about having everything at once, it takes years and years- you'll never have every tool you need. One last thing is you can make a whole lot of tools with a chop saw and a welder. Sorry for all the reading, hope this helps you guys!
So what you’re saying is put yourself into massive debt from the start lol sounds pretty dumb to me
For a large drift/punch I use a length of re bar, works fine and was free.Perfect for knocking out the bushes on the quick hitches. And a dead blow plastic hammer for when i put an allen socket in to the drain plug on the drive motor as they always have mud/concrete in them.
Always seems to be packed with something. couldn’t agree more use whatever scrap for a punch you can find
Totally appreciate this Video bro ! Great to see Heavy Line in the mix Thank you!🤟🏼
Thank you
Sick RGB lighting underneath the box bro
The test light better be 24v or the bulb will not last long I use gator jaws for large filters they work great good info and video
Thank you for the input and It sure won’t last long, but I have a solenoid coil off a 24v to put load on for that. I really enjoy comments like this so if someone reads it they will know this stuff. Thank you again I appreciate it.
Thanks for sharing
Looking to switch careers soon and this was really helpful. Thanks man
You seem to be a verry good guy... Probably a good boss to. 👍
Great video I definitely agree with the multimeter and the big channelocks for oil filter wrenches I use them all the time
Thank you
I had a great time on CP Tool addict's channel last night. Hope to see you guys out there again.
It was great man. Thank you
Great video excellent information
For a cheap good set of wrenches the John Deere set is worth is a lot of the guys at my dealership have had them for many years.
They are great.
Agreed jd wrenches are grate I’ve had my meteoric set 20+ years
Also cih/Newholland wrenches are made by Snapon at half the price and warranty is life time
Cat, cih, Newholland wrenches are made by Snapon and warranty is life time at half price
I like blue hard handle one u got those are classic love it
flash light too! great vid
How about a video for how to get started working for a heavy equipment company. My dad was a heavy equipment mechanic for 30+ years and I want to move in that direction cause it's good money and I already have some knowledge for it. I currently work on mid size/heavy duty diesel trucks. Great video by the way.
Great suggestion thank you b
Loadpro test leads with a multimeter are awesome. You can instantly load a circuit using system voltage and read the voltage drop on the meter. I use loadpro leads every day.
I’ll check in to them. A guy suggested that a while ago too. Thank you for reminding me lol.
@@theheavywrench9549 the inventor of the loadpro is Daniel Sullivan, he has videos on RUclips and authored a great book called" fundamental electrical troubleshooting." Highly recommend the book to your audience.
Snap-on Impacts are awesome along with their screwdrivers/Matco to and MAC all GREAT tools! QUALITY over quantity like you said.
Thank you that’s the biggest thing I regret on some tools I have purchased in the past.
Solid video and advice dude.
Thanks Man
Great informative video, wish I was a young tech starting out cause this video explains it all
Thank you i am glad you think it is on point.
Great vid. Always looking for new ideas.
thank you
Good video- I couldn’t agree more with the quality over quantity!!
thank you for the support
Thanks bud, really enjoy your videos
Thank you so much
Great video !! Love seeing heavy equipment guys putting out content, think it would be a great vedio to do stuff you have after 20 years ,stuff for diagnostic, Testing and just cool stuff you use or have made to get jobs done. More speciality stuff anyways awsome channel 👍🔧
I’ll keep that in mind maybe that would be a video I can do soon.
Thank you so much
What u need to start is a Harbor Freight us general tool chest lets say 44" to start make some money then buy the end storage cabinet with drawers not the locker one, then clip all the super coupons ... also start buying Rigid 18 volt impact wrench beast less air tools the better yes 1 ' air impact central forge good enough for times need 1" drive.... and study hard get your hands dirty and work your way up to get ASE Heavy truck tech certified such as myself.... 28 years and still learning.
This is solid advise thanks for sharing keep up the good work
I’ve also switched to the cordless impact gun
Great advise.
Even harbor freight or Lowes and Home Depot make good boxes... i have a harbor freight top box in the back of my truck when I’m working on stuff at jobs
Yes they do and there is nothing wrong with any brand that works for you.
Love my Rigid strap wrenches for lube services. I also got one cutoff with about a 5 inch handle for tight spaces.
always need to make those custom tools lol
Yes more tool videos
hey man thanks for the video really helpful
Thank you 😊
Great video. Thanks for posting this type of information.
Thank you so much. Can I ask what part of the world are you from ?
TheHeavyWrench Muncie, IN
I suggest if you new and are going to buy some sockets buy impact you can use them both ways
To be honest the harbor freight jumbos aren’t a bad way too go 1 3/8 - 2inch I’ve had mine for two years and they work fine. $50 with coupon
That’s awesome to hear. As long as they work. I had to grind my 2 inch down to make fit it doesn’t hurt to have a cheap set to make custom.
Nice video good perspective on tools! Subscribed keep it up!
thank you i appreciate it
If you’re in school, always buy quality. Most major brands offer 50% student discounts, get yourself good tools while they’re affordable.
This is true thank you for the comment I appreciate you adding in this tip.
Freight harbor service wrenches super inexpensive get into the tightest places for Hydraulic lines
i keep hearing about these and now i need to check them out like asap
Don’t waste any money on a cart. Spend that on a service body and crane for your truck and make some real $$$
Quality video subscribed. Good to see a positive attitude towards youngsters like myself coming into the industry, I'm currently a year and half in and enjoying it.
Awesome to hear keep at it and thank you so much.
Im looking to get into the heavy equipment mechanic industry just still in school and just wondering hypothetically if I got a job as a cat mechanic I can just waltz in there with my tool cart/box?
You can buy quality tools from Amazon as well! EI Wright, SK, Proto, JH Williams, Gearwrench, Channel Lock, Knipex, Wera, Wiha, Klein, Gray Pneumatic, Ingersoll-Rand.
this is true as well i have plenty of stuff from amazon as well. thank you for the input it all helps out
Awesome suggestions
Thank you
The more time I spend as a tech the more I realize I need to buy quality.
j c that is so true it’s hard to understand until you are in the thick of it. Lol. Have a great day and thank you for watching
In light vehicle automotive all I need is 2 spanners, they do it all
Very nice!
Thank you so much
Dont forget the importance of 6 point wrenches i always seem to find a spot where I cant get a 6 point socket on and they can save u on an an old or halfway stripped bolt
you bet ya i have a set of them in my box but did not mention them. good call this is the stuff im talking about getting out there to everyone.
I would recommend a beginner in my trade to buy American made tools. There IS a difference. You don't have to blow all your money on brand new Snap-on tools. Go to auctions or find an old dude retiring, look for Proto, Wright, Williams...beware of the tool trucks, Matco in particular. A majority of current Matco tools are imported garbage.
i would agree with that quality over quantity
Can you make a video of specialty tools for some serious trouble shooting or hydraulic trouble shooting or any specialty tools on general that a master or a SR mechanic may have not for someone who's starting?
i will probably do it in a series of videos and put some stuff together. ill bump them up on my to do list thank you for watching
@@theheavywrench9549 what about a teka diesel diagnostic laptop that the master technician use to trouble shoot heavy equipment what about that can you use any laptop just as long as u have the program to do it do only certain laptops u can use I wanna buy a laptop to use for diagnostic do I need a teka diesel diagnostic laptop or could I use any ordinary one can you make a video about that???
@@theheavywrench9549 hydraulic troubleshooting, always interested !!!!!!
I worked for four season heavy equipment and my boss would use this laptop to diagnose the equipment but he NEVER let any other technician use it or showed us how he keeped that information to himself that's why I decided to buy my own and learn but idk if I need a specific one or how to get the program or anything about that cam you make a video on that I seem videos where ppl use autel scanner for diesel bus if there a difference between the teka and autel scanner could u use that on heavy equipment which would u prefer ????? Huge fan of this channel Keep up the videos 😁👏🤘🤘🤘
You’ll need a different software program for each engine manufacturer and brake manufacturer, you’ll need and an adapter to go from usb to com-port. They sell laptops with everything loaded on them that come with the adapters for around $5,000
ET
I think beyond tools you must be organized with your tools. Nothing worst than looking for a wrench because you forgot where you put them. Always return your tools to the same place so you never waste time rebuying tools because you misplaced them.
Kyle Bridgeforth great point thank you 👍🏻👍🏻 replacing a lost tool is the worst.
How much do you use 1/2 compared to 3/8 apart from a adaptor I don't have anything 3/8 I allways thought it was more for car mechanics maybe I need to get a set and give it a try
Best think to buy right from the gate is large crow feet wrenches they will get u out of some big jams
TheHusky1989 they are so handy 👍🏻👍🏻👍🏻
I agree dont buy a tool box that will cost you your first born.
My first box I got was new 1000
From craftsman a 24 drawer box but because it had some bings because it was a display it was 250 for a top and bottom. Also when I started turning wrench I got Sears was the cheapest and the sets had lifetime warranty and covered everything that I needed to start working on cars mowers light trucks and even small equipment.
And oh yes one more thing if you dont want to have it be a really big hit to your pocket book at one cost
But will help to get the tools faster.
I was and still do side jobs.
This helps cover the purchasing of tools faster . Oh and the best rool that dose not cost anything to buy but is the most unused is your brain and mouth ask questions of the other guys around you and if you borrow tools keep track of what you borrow. The guys at the shops had a policy that if you borrow a tool 3 times you needed it. But they were ok and still helped me out.
And oh if you do borrow a tool tell the guys that it broke when you used it. They will not get mad if you do brake it tools brake but if dose and they are not told and then they need it and find it broken it could end up that you will lose the help from others. I have had that happen to me helping someone out. Thankfully when you have your sets and the sizes over lap you can use a different dive size but is a little harder.
Good luck with your new job choice. Remember the jobs you may get are most likely going to be oil change light work so they are not going to be the big jobs like engine rebuilds so dont get discouraged you will get there.
Max Volovich thank you so much this is what it’s all about sharing the truth and experience you had for those trying to get started. Thank you again
@@theheavywrench9549 dont have to thank me. Not many guys wanted to share tools when I was working. Infact most told me to run dont even get into the industry. I guess they thought it I was going to take money out of their pockets.
The industry needs to grow we are not getting younger lol that might be an other video the pains of the job the PPE TODAY
Compared to the band aids of the past.lol
For example there isn't a difference in harbor fright tools just quantity over quality Is it the same way with the diesel laptop or no???? Can you make a video on that or no I seen those computer go for 300 to 5000 what's the difference in them could I use my at home laptop if I had the correct program to diagnose heavy equipment ???? Please make a video if u can
A decent set of angled wrenches some of those hydraulic hoses / fittings are a bitch to get to with a standard wrech
I agree with the angle wrenches, but that can come after you are there a few years.
Lol most of us that cart would bury us in debt
Ya it takes time man.