Thanks, Paul. Do you have a tutorial on how to set up stage display? We are a small church with a projector/drop down screen in the front and a large widescreen TV in the back. I currently have the same slide appear on front and back. This has worked well for us but I can envision a use for stage display.
Hi Paul, thank you for your videos, they are very informative. I was especially interested in this video because I need to expand the number of HDMI ports on my Windows desktop. In this video, you mentioned the Decklink option and the Ultra Studio box as an option. We will have four monitors that we would like Propresenter to control. However, we may add more monitors in the future. My question is if we start by adding a Decklink card if there are available slots on the PC can we add a second Decklink card? I do not have experience with the Ultra Studio box, will PP see all the monitors attached to the box concurrently? Thank you.
I know on the Mac you can, but I'm pretty sure you can do it in Windows, too. I just haven't tested it myself. Head to the Official Group in Facebook (which I run along with Renewed Vision) and ask: TDM.fyi/ppug
Hi Paul! Our church is undergoing an extensive tech reno. We have an in-house audience screen and live stream graphics (through the Decklink Duo), and for the live stream graphics, we are using the announcement & Props layers. I'm running into an issue of what layer / how to program what graphics the LED wall will use. I want my LED wall to just be playing a simple looped video throughout the service and every time I click something the video stops playing. The only two available layers are as video input or messages. I don't know what to do without re-assigning our prop bin to become LED wall graphics.
Messages, Live video, and masks (which you didn't mention, but probably isn't used) can't do what you want, so your only option is to rethink how you're using layers currently. Personally, I wouldn't use BOTH the props and announcements layers for live-stream graphics. I'd pick one (or just use the slides/presentation layer, routing appropriately with looks).
Thank you @@PaulClifford. I will take your suggestion and move all of my live stream graphics into the Announcements layers and LED graphics into the props layer
Paul, I have a secondary SDI output via BlackMagic UltraStudio Monitor 3G connected over BNC cable with a BlackMagic MicroConverter SDI to HDMI on the tv side. Do you know why I get picture but no sound? My setup works fully on a Samsung 70" LED 4K tv but only partially (no sound) on a Samsung QLED 55" 4K TV. Thanks.
Great video!
Thanks!
Thanks, Paul. Do you have a tutorial on how to set up stage display? We are a small church with a projector/drop down screen in the front and a large widescreen TV in the back. I currently have the same slide appear on front and back. This has worked well for us but I can envision a use for stage display.
This one should help: ruclips.net/video/Yo-QFJTDj3A/видео.htmlsi=2lVg03JRpEAQzViU
Hi Paul, thank you for your videos, they are very informative. I was especially interested in this video because I need to expand the number of HDMI ports on my Windows desktop.
In this video, you mentioned the Decklink option and the Ultra Studio box as an option. We will have four monitors that we would like Propresenter to control. However, we may add more monitors in the future.
My question is if we start by adding a Decklink card if there are available slots on the PC can we add a second Decklink card?
I do not have experience with the Ultra Studio box, will PP see all the monitors attached to the box concurrently?
Thank you.
I know on the Mac you can, but I'm pretty sure you can do it in Windows, too. I just haven't tested it myself. Head to the Official Group in Facebook (which I run along with Renewed Vision) and ask: TDM.fyi/ppug
Hi Paul! Our church is undergoing an extensive tech reno. We have an in-house audience screen and live stream graphics (through the Decklink Duo), and for the live stream graphics, we are using the announcement & Props layers. I'm running into an issue of what layer / how to program what graphics the LED wall will use. I want my LED wall to just be playing a simple looped video throughout the service and every time I click something the video stops playing. The only two available layers are as video input or messages. I don't know what to do without re-assigning our prop bin to become LED wall graphics.
Messages, Live video, and masks (which you didn't mention, but probably isn't used) can't do what you want, so your only option is to rethink how you're using layers currently. Personally, I wouldn't use BOTH the props and announcements layers for live-stream graphics. I'd pick one (or just use the slides/presentation layer, routing appropriately with looks).
Thank you @@PaulClifford. I will take your suggestion and move all of my live stream graphics into the Announcements layers and LED graphics into the props layer
Paul, I have a secondary SDI output via BlackMagic UltraStudio Monitor 3G connected over BNC cable with a BlackMagic MicroConverter SDI to HDMI on the tv side. Do you know why I get picture but no sound? My setup works fully on a Samsung 70" LED 4K tv but only partially (no sound) on a Samsung QLED 55" 4K TV. Thanks.
In pro presenter preferences, (or settings, depending on your operating system), under audio, do you have SDI /NDI enabled?
Yes, I do have SDI option enabled.