Silicone mat is the way to go, figured this out through some trial and error when I first got the Q1. This + tape in between halves of cases makes the ping pretty much a non issue
I ordered silicon sheet before i got my Q1...after "tape in between" Keybored's mode, i am not sure the silicone mat is needed. Probably gonna reduce the flex right?
went with the same color q1 but with red samurai instead, added some tape to the back of the pcb and 2 layers of tape by the screw holes and completely got rid of the ping
Oh yeah, I saw that as well. His method minimises the transfer of vibrations to be bottom plate while mine reduces the vibration of the bottom plate itself. Both methods work. I intentionally wanted to try something I don't see anyone else doing.
I add this silicone mod to my Q 1 and changes everything , I use the tape mod, 2 layers and a 3rd on the spacebar area, force break mode, the silicone that I use was the thinnest that I found in Amazon, I think 1/25 of an inch, using Glorious Panda , lub and film, and hacker keychron pbt keycap, thanks for the silicone tip, was breakthrough mod.
ive been using 1mm and 2mm silicone sheet to mod some of my keyboard. Im planning to get a keychron q1 and will also do the same mod like u did here :)) good and clean video, love it
@@3a1s5v4a61r46v I found an amazon link, but it's more expensive to what I paid. www.amazon.com/500x500mm-0-033inch-Thicknes-Transparent-Resistant/dp/B07P565PJF/ref=sr_1_21?dchild=1&keywords=silicone+sheet&qid=1634363433&sr=8-21
@@BreakingBald0 aye, thanks man. I'm guessing you're from SG, and I'm assuming that you got the silicon sheet off shopee or some similar platform? Do you have the link for that? Thanks in advance :)
I'm planning to build and mod a custom keyboard soon and i have an extra amazon basics silicon baking mat, do you believe this should work pretty much the same?
I've used thicker pe foam and you will need to poke holes for the center post but you shouldn't need to poke hole for the electric pins. Thicker pe foam also makes it easier to bend pins. If you are good about putting switches in straight you shouldn't really bend more pins than is normal.
@@BreakingBald0 oh okay. getting one shipped from China right now. The silicone dampening effect is far superior (and just 1mm) compared to multiple foam layers.
I found an amazon link to the same thing, but it is twice what I paid for it. www.amazon.com/500x500mm-0-033inch-Thicknes-Transparent-Resistant/dp/B07P565PJF/ref=sr_1_21?dchild=1&keywords=silicone+sheet&qid=1634363433&sr=8-21
You can pour your own for pretty cheap. There's a 7oz two part silicone molding kit for $13 on amazon. I was able to use it easily on my first time, just make sure all holes are taped up to prevent a disaster
What the heck i didn't expect silicone sheets to make such a huge difference
Silicone mat is the way to go, figured this out through some trial and error when I first got the Q1. This + tape in between halves of cases makes the ping pretty much a non issue
I ordered silicon sheet before i got my Q1...after "tape in between" Keybored's mode, i am not sure the silicone mat is needed. Probably gonna reduce the flex right?
@@NhatLinhNguyen82 i think its about the same thickness of just running the single thin foam, but with more dampening, so it couldn't hurt
That seems to be the most effective solution in terms of reward/ease of implementation. Good job, buddy.
Yeah it really is. The silicone pour does the same job, but... It's requires much more effort.
Thanks!
@@BreakingBald0 I literally went on eBay & bought a sheet straight after I watched your video, so no, thank YOU, Sir.
went with the same color q1 but with red samurai instead, added some tape to the back of the pcb and 2 layers of tape by the screw holes and completely got rid of the ping
how much did you pay for the samuari ones?
Keybored handle it pretty good with the addition of mask tape beside the screw holes
Oh yeah, I saw that as well. His method minimises the transfer of vibrations to be bottom plate while mine reduces the vibration of the bottom plate itself. Both methods work. I intentionally wanted to try something I don't see anyone else doing.
@@BreakingBald0 Would you recommend doing both?
@@jamilzulqiful5435 you could definitely do so, though I don't think I'd be able to feel/hear a different personally.
I love how none of the questions about “which silicone sheet” or “where can I buy” have been answered.
I add this silicone mod to my Q 1 and changes everything , I use the tape mod, 2 layers and a 3rd on the spacebar area, force break mode, the silicone that I use was the thinnest that I found in Amazon, I think 1/25 of an inch, using Glorious Panda , lub and film, and hacker keychron pbt keycap, thanks for the silicone tip, was breakthrough mod.
So where can I purchase this silicone sheet?
ive been using 1mm and 2mm silicone sheet to mod some of my keyboard. Im planning to get a keychron q1 and will also do the same mod like u did here :)) good and clean video, love it
THanks!
Well done. Sounds a lot better
Great vid. Really sounds amazing with the silicone.
Thanks
@@BreakingBald0 do you have the link for the silicon mat?
@@3a1s5v4a61r46v I found an amazon link, but it's more expensive to what I paid.
www.amazon.com/500x500mm-0-033inch-Thicknes-Transparent-Resistant/dp/B07P565PJF/ref=sr_1_21?dchild=1&keywords=silicone+sheet&qid=1634363433&sr=8-21
@@BreakingBald0 aye, thanks man. I'm guessing you're from SG, and I'm assuming that you got the silicon sheet off shopee or some similar platform? Do you have the link for that? Thanks in advance :)
@@3a1s5v4a61r46v shopee.sg/%E2%9C%BFPTPTRATE%E2%9C%BF1pc-NEW-500*500*1mm-Silicone-Rubber-Sheet-Plate-Mat-High-Temperature-Resistance-i.98758982.1728642106
Which silicone sheet do you recommend? Awesome video!
Noob question, why would you want flex? Also would a 1.8mm silicone sheet work? I'm guessing the sound would be dampened even more?
Beautiful video, thanks! 👌
If I was to use a 0.5mm silicone sheet instead, do you think it would increase the flex or is it not worth it?
insane mod bro !
Try a product called kilmat instead of the case foam. works wonders and won't affect the flex of the board since it's so thin.
Ah, great let me check that out. Not sure if they come in 1mm thickness.
The silicone sheet is more effective at dampening vs Kilmat and is much cheaper as well.
Can you put tape mod (aka tempest mod) and pe foam with the silicone and is it good
I'm planning to build and mod a custom keyboard soon and i have an extra amazon basics silicon baking mat, do you believe this should work pretty much the same?
Well it all depends on the thickness of the mat. Silicon is Silicon and should work the same. My piece is 1mm thick.
Where did you bought silicone sheet?
im new to this so.. you put the PE foam on the side with the switch holes and then just push the switch prongs through into the hot-swappable board?
it has to be thin enough though. My PE foam is only 0.5mm thick.
what is the size of the silicone?
Awesome mods! Can I know where do you get the silicone sheet from?
Thanks! I bought it off a local (Singapore) website. I believe if you Google it, should not be difficult to find.
@@BreakingBald0 do you happen to have the link web shop you got it in SIngapore? thank you!
@@BreakingBald0 whats the link to the website?
@@mfa6648 shopee.sg/%E2%9C%BFPTPTRATE%E2%9C%BF1pc-NEW-500*500*1mm-Silicone-Rubber-Sheet-Plate-Mat-High-Temperature-Resistance-i.98758982.1728642106
so pe foam mod doesnt require anything like poking holes for the switches?
From my experience building 6 boards with PE foam, I did not need to do that. But do note that my PE foam is only 0.5mm thick.
I've used thicker pe foam and you will need to poke holes for the center post but you shouldn't need to poke hole for the electric pins.
Thicker pe foam also makes it easier to bend pins. If you are good about putting switches in straight you shouldn't really bend more pins than is normal.
Did you use a silicon mold?
Godo Job!!!
Where did you get the silicon sheet? mixed it yourself or bought and cut?
The Latter
Can u send me a link to the silicone i can’t find any
How do you feel for the socket when you have PE foam over it?
Ah, the PE foam is only 0.5mm thick. It is so thin, you can even see the holes through it.
Where did you get the blue durock v2
Hey, I can't remember exactly. But if you are in Singapore, then I got it off someone on carousell
Those are sold under the name Everglide V2. The are essentially the same as Durock V2, just a different name.
@@flourish5554 Ah, thanks for that clarification! You are absolutely right.
just 1mm silicone sheet is enough without the foam?
Yeah, works really well to reduce all pinging and allow for flex at the same time.
How did u find this 1mm sheet in singapore? I can only get it through shopee
I got it though shopee
@@BreakingBald0 oh okay. getting one shipped from China right now. The silicone dampening effect is far superior (and just 1mm) compared to multiple foam layers.
Indeed
Will a 1mm silicone craft mat work the same?
Hey, if it's silicone, it will work.
@@BreakingBald0 I also want to ask. Does this only remove the ping or the hollowness as well?
@@aphae I feel it removes the hollowness as well. As the silicone really dampens the whole board.
does anyone know where to find these? I have a Q1 and want to give this a shot
I found an amazon link to the same thing, but it is twice what I paid for it.
www.amazon.com/500x500mm-0-033inch-Thicknes-Transparent-Resistant/dp/B07P565PJF/ref=sr_1_21?dchild=1&keywords=silicone+sheet&qid=1634363433&sr=8-21
Did you make that sheet or buy it?
I cut it from a larger sheet
What Keycaps are those looks clean!
GMK Blue Samurai
could you send a link pls
@@esl5k16 I believe it's on drop
ok thx! oh yeah the silicone sheet did you put something on top to cover it or did you just put the silicone
@@esl5k16 just the silicone
is it silicone rubber?
Yes it is.
@@BreakingBald0 where did you get it? online or a local store?
@@alekseysher4807 in a different comment he said he got it from a local Singapore website
@@NoBox. thanks! missed that part.
is it okay for gaming or is it too high/steep? id like to buy this but for gaming mainly, so if anyone would advise me, id appriciate it.
It has a 5.2 degree typing angle, which I would consider pretty flat.
@@BreakingBald0 thanks for the response.
You should say something.
Switches?
Aquaking v3
where can you get the silicone sheet?
How did you obtain a 1mm silcone sheet
You can pour your own for pretty cheap. There's a 7oz two part silicone molding kit for $13 on amazon. I was able to use it easily on my first time, just make sure all holes are taped up to prevent a disaster