Top 3 Ways to Store Arborist Rope - TreeStuff

Поделиться
HTML-код
  • Опубликовано: 21 авг 2022
  • We know you use a lot of rope, so TreeStuff has put together this video detailing the three best ways to keep your arborist rope organized and tangle free. In this video, you'll learn how to properly hand coil your rope, store your rope in a rope bag, and how to shoulder coil large diameter ropes.
    Find all the arborist ropes and rope storage you need at www.TreeStuff.com
  • ХоббиХобби

Комментарии • 25

  • @LilyyyoftheRose
    @LilyyyoftheRose Год назад +3

    An older rock climber showed me the shoulder technique but for long ropes he doubled it up by taking both the ends together to start it out. As I've been using it, works pretty nicely and saves heaps of time.

  • @Huzzunga
    @Huzzunga 3 месяца назад

    Thank you, this is great and saved. I was watching your tutorial beginning with my 5/8” bull line rope. I have two huge oaks to deal with. I did the arm wind just to get everything relaxed as the rope came new wound and wrapped. 5/8” isn’t a lot of fun. Then I bagged it coiled. Next came the Bazooka 1/2”. I ended up tying that to my truck hitch to get it relaxed. Then I did the coiled method and bagged it. After I use these, if they don’t get damp, I’ll just bag them and per demo 2. I have a ways to go practicing with my equipment a few feet off the ground on an 8-10 walnut I cut back to cut down.

  • @kerriclark1915
    @kerriclark1915 5 месяцев назад

    Very informative & well explained….love your shirt btw!!❤

  • @TerrellWillams
    @TerrellWillams 2 месяца назад

    Great video!

  • @timhannan4551
    @timhannan4551 8 месяцев назад

    Very informative and helpful advice, thanks.

  • @JwLofy
    @JwLofy Год назад

    this was vary helpful and well done video, Thanks

  • @greggmouritzen7478
    @greggmouritzen7478 Год назад +2

    I'm surprised you didn't show the butterfly.

  • @seinifaith9512
    @seinifaith9512 Год назад +1

    Awesome video. Thanks for taking time

  • @nathanuntun6822
    @nathanuntun6822 9 месяцев назад

    Thank you .

  • @mikesoultanian8050
    @mikesoultanian8050 Год назад +10

    So the twist in the rope isn't a "fact of life", it's there because the coiling method you're using is actually causing twists with every added coil. Were you to continue doing this for the entire rope, it will also lead to annoying tangles when you go to use it. To avoid this from happening, you need to do the "over/under" coiling method that will put an alternating twist in the rope with every coil. The over/under method is required when coiling audio cables, and while not as obvious for rope, still makes a big difference. Here's how to do the over/under method: ruclips.net/video/cpuutP6Df84/видео.html

    • @nickbonner9712
      @nickbonner9712 Год назад +1

      I dont know, probly one of those things where everyone has a preference. These methods have worked for me for a long time. Whatever works for you though!

    • @mikesoultanian8050
      @mikesoultanian8050 Год назад

      @@nickbonner9712 you might not mind the twists, but doing the one-way twist really isn't the ideal way to coil a rope, and it's especially frustrating for the user that has to use the rope later due to all the built-in tangle-causing twists. Now, once you've run the rope over a branch, and/or through your devices, that will inherently migrate all the twists towards the tail of the rope (and hopefully clear them out), but why even create the potential for a problem from the get-go when it's easily avoidable - plus, if someone isn't careful, that twist-introducing method could lead to kinks and/or knots in your rope which could be a serious safety concern unless someone takes the time to untwist the rope before every use.
      Here are some other methods will yield a coiled rope that is free of twists and will consistently flake out perfectly:
      ruclips.net/video/r5ScaBkjoh4/видео.html
      ruclips.net/video/qMGf15BJxU0/видео.html
      This one is the same method as you described, but he addresses the twists:
      ruclips.net/video/EV-nnKle_68/видео.html
      Your second and third methods are great - the first really shouldn't be used unless you do the over/under method, which quite honestly, is difficult for most people to learn and is probably best to avoid entirely.

    • @mikesoultanian8050
      @mikesoultanian8050 Год назад

      @@nickbonner9712 this one just popped up on my feed (thank you RUclips algorithm :p) and does a great job highlighting the twisting issue and a method to avoid it (same as one of the others I provided):
      ruclips.net/video/E2DT-jJaW3k/видео.html

    • @seinifaith9512
      @seinifaith9512 Год назад +1

      Now all you have to do is make your own video on how to

    • @mikesoultanian8050
      @mikesoultanian8050 Год назад

      @@seinifaith9512 I was going to, but there were already a number of great ones (which I linked to above).

  • @dewaynemoore314
    @dewaynemoore314 11 месяцев назад +1

    You could also store it in a plastic bucket, with a lid, if it's not damp or wet, right ?
    .

  • @timothyboone5003
    @timothyboone5003 5 месяцев назад

    I was amazed/disappointed that someone with such a good reputation And was linked to his video by a reputable arborist company, would start the video with one of the worst ways to stow climbing lines. He even goes on to explain why it’s one of the worst ways it dismisses it as a fact of life.
    Twist/kinks in ropes are not “a fact of life”. They don’t just appear on their on. They form/appear because someone’s improper handling (in this case stowage). To recommend twisting the rope as you coil it is just absurd. Those twist/kinks that you ran into are there because of your recommendation. Every one of the twist that you place in the rope will have to be worked out before the rope is readily usable. This is especially true with longer lengths.