Overlanding Diesel Heater In A Case | Detailed Build | Tested 1000 Hours | MIKE HUNTS
HTML-код
- Опубликовано: 6 сен 2024
- Here are links to all the parts to build this system.
the diesel heater I used amzn.to/41ReSoO
power wire to plug in to 12v power source amzn.to/3HabXhL
heat wrap for the exhaust pipe in the box amzn.to/4aOr8dY
small computer fan to keep the inside of the box cool amzn.to/48r0shW
exhaust flange that wont melt the plastic box amzn.to/48Ivp0C
flexible exhaust pipe that goes from the heater to the flange amzn.to/3SdCgty
cooling vent covers amzn.to/48KMIhE
hot air out flange. this is where your dryer hose connects amzn.to/3vwzJlq
Love it, so good to watch straight clever handy man type set ups like this. Human nature forces some critics to always say things about those making their own builds and ideas but you did well and great watching. About to do the same with a chilly bin for my roof tent here in New Zealand. 👍
Hole saw and plastic - run your drill in reverse, cuts much less chunks and scribes itself a start point without the biting jump
Little Handydude!!! That is quite the little setup Handydude. I learn something new everytime you post a video.
Very cool project
I love your bandsaw setup, very creative.
Just an FYI, you can use red diesel in that. Red diesel is sold without the highway taxes on regular diesel fuel, it's red because they add red dye to identify it so no one can put it in vehicle fuel tanks without it staining the rest of the fuel in the tank making it easy to verify by DOT by just dipping into the tank. If they find red dye in a vehicle tank the fine is pretty stiff. You can get it at most truck stops because it is used in reefer units. It's also used in farm equipment and any off road diesel vehicle.
that's just home heating oil, yes?
HOOO BABY FINALLY A NEW VID ON THIS CHANNEL
Wow I forgot about that heater.
Every RUclips video I went and watched. Everyone copies everyone else. You wasted a lot of real estate.
I made one with Ridgid medium size box and other with Apache 4800 case.
The ridgid box has the heater, 20ah LFP battery, solar controller, voltage monitor, AC to DC charger, USB, 12v socket, and cooling fan. I also added a quick disconnect fuel tank.
In the 4800 case, I placed the heater, 50ah LFP battery, voltage monitor, 12v socket, and AC to DC charger.
I exited the case with exhaust and the intake without the use of the pipes.
No need for the cooling fan. I just added two 3" vents on opposite sides.
I also added a quick disconnect fuel tank.
That 1" of dead space in the fuel tank could catch sediment and any stray water, so atleast there is some benefit.
So what exactly should people do if they don’t know what a mass air flow sensor is? You “accidentally” cut that out. 😂
The same people who need to put gloves on 😂😂
LFG!!!!
💪💪
🇺🇸🤘 Heck Yeah Mike Hunts🤘🇺🇸
🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸Bump🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸
🎉🎉🎉🎉
No need for PPE. Yours eyes were safely out of view!
safety squints engaged
Curious, what did the build cost you? Thanks for sharing the build..
Around $260 for everything.
Mike, what's the bandsaw table for the Milwaukee?
It's homemade
Is that the 5KW or the 8KW version?
The 5kw and 8kw are the same unit. check out this video. ruclips.net/video/9zauAEwgZ14/видео.html
Mine is 4 years old they may have some newer options out now.
Why don't you just buy an all-in-one kit? These setups have everything you just built plus the fuel tank. About $100 plus tax etc. They even come with a handle.
I already had the diesel heater. I though about just buying the all in one kind.