If you wanna know why there is blood all over one of my hands, this video was filmed few weeks ago and on that day just before I shot this video I had a fight with one of my neighbours before hand. It’s a completely normal process as we have bare knuckle fights we both walked away fine and still living 😄 it’s a regular thing we do with all the family and my cousins feel free to check it out on RUclips. But accidentally I ended up hitting him a bit hard in the mouth knocking out his front teeth 😂 no hard feelings tho between us as always, and who knows he might get me next time 😂
Pretty disappointed with this one. I am dealing with the same problem with a broken hood lever. You don't have to go through all of this rigmarole to open your hood. Just remove the plastic side panel that houses the OBD port, trunk release button and the hood release lever. Remove the cable from the mechanism and pull the end of the cable with your hand and the hood releases easily. Been doing this for months.
Yes very very very easy maximum it should take you is 5 mins the hole and the cable will route straight through as it’s a straight cable, there is nothing to this job what so ever.
Well try any of these in a E60 530d you cant get at the offside latch thought the front grill or after removing the wheel arch liner cant even see it never min reach it my cables come away from the latch so cant pull it any advise?
What about a 2006 bmw 325i hood? It’s dented in the front left side and my bumper is damaged also only front left side.. I’ve been trying to remove those parts myself with my two jackets and 10-11ml.. how do I get bented hood off my car
I thought this was going to be the actual bonnet latch, under the front - nothing wrong with the 'release' catch, just cannot release the actual bonnet catch from the front of the car.
I replaced my Aisen tranny on my 2007 mini R56. After install the car won’t start. It cranks, I got spark and fuel injection pulse with noid light, 51psi at the fuel rail and good compression. But won’t fire or start. Codes show 2B5F, 2EE5, 27B4, 2842 and 287A. I changed the MAF and I don’t see any loose plugs or obvious wiring issues. I don’t think it’s a bad DME. The car ran great before the transmission replacement. If I clear the codes and crank it, the MAF codes come back. I ordered a new MAP and coolant sensors. If I spray starter fluid it doesn’t do anything. Any ideas? When I unbolted and reinstalled the flex plate from the torque converter, I rotated the engine counter clockwise, would that cause the timing chain to slip a tooth or something. I’m stumped.
Please help I have a 2012 528i and my speakers keep going in and out whenever i hit a bump? The speakers sound like they don't work but work completely fine after I hit a bump? The underseat subs as well have stopped working.
hi i was just wondering if you can give me some advice my bmw 635d m57 seems to have a big issue the car keep blowing off the egr boost pipe did it twice in one day and then later that day the car seem to stutter at low revs while accelerating around half hour 10 miles later it struggled to idel at a junction i managed to pull up 100 yards later safely and it took a few attempts to turn off i wudnt say it over run to bad and now it says it has no oil in the engine many thanks
Bro i wanna watch more of your videos but damn man you gotta start actually not clickbaiting the titles and give away at least something about the video. Each title seems like the same one with a pic of you holding up some random part nobody knows what it is
If you wanna know why there is blood all over one of my hands, this video was filmed few weeks ago and on that day just before I shot this video I had a fight with one of my neighbours before hand. It’s a completely normal process as we have bare knuckle fights we both walked away fine and still living 😄 it’s a regular thing we do with all the family and my cousins feel free to check it out on RUclips. But accidentally I ended up hitting him a bit hard in the mouth knocking out his front teeth 😂 no hard feelings tho between us as always, and who knows he might get me next time 😂
Pretty disappointed with this one. I am dealing with the same problem with a broken hood lever. You don't have to go through all of this rigmarole to open your hood. Just remove the plastic side panel that houses the OBD port, trunk release button and the hood release lever. Remove the cable from the mechanism and pull the end of the cable with your hand and the hood releases easily. Been doing this for months.
Is replacing the cable an easy enough job to do at home if it needs doing?
Yes very very very easy maximum it should take you is 5 mins the hole and the cable will route straight through as it’s a straight cable, there is nothing to this job what so ever.
Well try any of these in a E60 530d you cant get at the offside latch thought the front grill or after removing the wheel arch liner cant even see it never min reach it my cables come away from the latch so cant pull it any advise?
Your videos give me hope
Thanks a lot I appreciate it ! I want them to give you the power to attempt these repairs yourself and easily 😀 that’s my plan.
Great unless the cable breaks on the back side of the hood latch
Do you have a video on how to close the e90 bonnet latch .. I’m having problems locking it properly , I think the latch needs lubricant.. or renewed .
Dean I love this channel I just upgraded my n54 turbos
Nice one mate that is a great fail safe, considering I have my bonnet up most weeks. Top video
No problem geezer
What about a 2006 bmw 325i hood? It’s dented in the front left side and my bumper is damaged also only front left side.. I’ve been trying to remove those parts myself with my two jackets and 10-11ml.. how do I get bented hood off my car
I thought this was going to be the actual bonnet latch, under the front - nothing wrong with the 'release' catch, just cannot release the actual bonnet catch from the front of the car.
I replaced my Aisen tranny on my 2007 mini R56. After install the car won’t start. It cranks, I got spark and fuel injection pulse with noid light, 51psi at the fuel rail and good compression. But won’t fire or start. Codes show 2B5F, 2EE5, 27B4, 2842 and 287A. I changed the MAF and I don’t see any loose plugs or obvious wiring issues. I don’t think it’s a bad DME. The car ran great before the transmission replacement. If I clear the codes and crank it, the MAF codes come back. I ordered a new MAP and coolant sensors. If I spray starter fluid it doesn’t do anything. Any ideas? When I unbolted and reinstalled the flex plate from the torque converter, I rotated the engine counter clockwise, would that cause the timing chain to slip a tooth or something. I’m stumped.
Please help I have a 2012 528i and my speakers keep going in and out whenever i hit a bump? The speakers sound like they don't work but work completely fine after I hit a bump? The underseat subs as well have stopped working.
Hi Bmw. Doctor.... My bmw e90 320 I.. Trunk boot cannot open, I'm use remote / manual key also not work.. Please help me.. 🙏
Ihave problem with water in ecu bmw 1 series 120d 2006. why water com in and no come out?
took me four days to get the passenger side unlatched, now for the drivers side.. should have it in about a week
great content! Where r u based? I have a x5 that needs a lot of upgrades including 30mm suspension lift.
hi i was just wondering if you can give me some advice my bmw 635d m57 seems to have a big issue the car keep blowing off the egr boost pipe did it twice in one day and then later that day the car seem to stutter at low revs while accelerating around half hour 10 miles later it struggled to idel at a junction i managed to pull up 100 yards later safely and it took a few attempts to turn off i wudnt say it over run to bad and now it says it has no oil in the engine many thanks
Hi i have a e60 530xd and it has a Noise That u cant figure out what it is. Is there a Chance i can Sent you a Video ?
Will this work on my e92 to 2011 335i coupe
Doc I have a 323i 2000 wagon my EML light comes on when I rev past 3 rpm what can I do?
What about a 335xi hood latch
That's some really useful information, will have to keep that in mind 😉
Good my bro 👊🏻
Where are you based? Near London?
Thanks for advice, now my left hand looks similliar to yours ;) but in the end i opened this mother fuc.er. Thanks again
Bro i wanna watch more of your videos but damn man you gotta start actually not clickbaiting the titles and give away at least something about the video. Each title seems like the same one with a pic of you holding up some random part nobody knows what it is
Your not meant to know what it is until you click, that’s the whole idea. If you want to know you have to click to find out 😁