I stumbled on this and got led down an all day rabbit hole that ended with me successfully booting my old backup server from an NVME drive. Nicely done and thanks for the links to the forums as that was instrumental.
I'm SOOOOO glad I found this, I came across the guys vid earlier today and was a bit lost.. Great vid explaining everything and will be sure to get a bios sorted asap.. Thank you !! Sub'd liked
@@cs.studios I know the adapter you got there, has a on board chip to allow use of the 2 nvme. But I see cheaper ones that have 2 nvme - would the that be seen as 1 drive with them.. Or would they only work on a board with Bifurcation.. Any help, suggestions welcome.
Sweet just got an X5680 for $15 to throw on my old sabertooth w/ 48 gb ECC DDR3 1333. Going to see if I can get this thing to play Diablo 4 w/ a newer graphics card and 1 TB NVME. Wish me luck!
@@cs.studios Hi ! Very nice upgrade ! Can you please elaborate on what in the specification makes the card run at full speed / faster than the cheap model? Is it because it's "dual" (but I thought its not related as it's for 2 NVME drives)? I'd like to be able to understand what to look for in the specifications so I can pick my own model of adapter. Is it simply the speed, regardless of single/dual? Thanks !
It's such a shame the original DUET/REFIND guides all seem to be gone, especially the one from years ago that was IIRC on the win-raid forums. I just tried the latest guide and refind hangs on "xxxxxx bytes of system memory tested OK"...
I had this same issue using duet on my sr-2 build..i fixed it just by updating to the latest version which fixed my issue. I recommend checking to see if you have the latest build
@@cs.studios I read about another way that lets you boot off a SATA drive to get uefi also, including booting from these nvme. I think that would be even better, but I have to research it more. Uefi might then allow video cards to use the resizable bar feature. To me, that would be more useful than nvme
Год назад+1
I have an x58a-ud7 gigabyte flash the custom bios, but not work
My board is a PCware Flame and I discovered that it is a copy of the Foxconn Flaming Blade, master Ismail already created the BIOS for, however, for a different nvme than mine 😔 I have a KC3000. What should I do?
Это обычный рэйд контроллер на дисках nvme. Он и без обновления биос обязан работать. Кастомный биос я прошивал для прямой связи nvme ssd с материнкой и в моём случае asus sabertooth x58 с ними работает.
how long does it normally take for the guy to get back to u with the modded bios i requested one for a gigabyte x58 board 2 days ago so far haven't heard anything back.
@@coxyofnewp no. apparently there was a huge earth quake in turkey and that is were the guy is from. so not sure if or when he is going to be back working on this again. he hasn't logged in to techpower up in over a week. hopefully the guy is ok and will come back at some point.
Now we're just waiting for them to release TPM 2.0 bios mods for X58 so we can actually use the damn TPM 1.2 connectors for TPM 2 modules and be able to play the god awful game called Valorant
Hello! Have you lagecy BIOS or UEFI? Becouse it's look like uefi. There is not difficult to inklude NVME drive in UEFI bios, But very difficult in Lagecy...( I have Award on board and can't start from NVME / not duet, not clover...😓😓😓😓
![Kodak Black - Sharp Vibes [Official Music Video]](http://i.ytimg.com/vi/oEV0OoLJeIs/mqdefault.jpg)
I stumbled on this and got led down an all day rabbit hole that ended with me successfully booting my old backup server from an NVME drive. Nicely done and thanks for the links to the forums as that was instrumental.
Equipping an NVME PCIe SSD (capped at 2.5 GB/s) on an X58 board? What a novel way to keep the old platforms alive!
Your videos are a breath of fresh air, love x58, love mac pro stuff. I had a wee browse of your videos :) keep up the great work
Thanks! Got part 3 coming eventually with some more upgrades. Also buying a 1st gen laptop and upgrading cpu/gpu as well
@@cs.studios oh hell yeah
I'm SOOOOO glad I found this, I came across the guys vid earlier today and was a bit lost.. Great vid explaining everything and will be sure to get a bios sorted asap.. Thank you !!
Sub'd liked
I ended up taking out nvme on the x58 and put it in my SR-2. You’ll see why in part 3…all three pcie slots are filled now with something 😁
@@cs.studios I know the adapter you got there, has a on board chip to allow use of the 2 nvme. But I see cheaper ones that have 2 nvme - would the that be seen as 1 drive with them.. Or would they only work on a board with Bifurcation.. Any help, suggestions welcome.
Oh man, been waiting for this.
You are a technological angel!
Thanks!!
fantastic work!
Sweet just got an X5680 for $15 to throw on my old sabertooth w/ 48 gb ECC DDR3 1333. Going to see if I can get this thing to play Diablo 4 w/ a newer graphics card and 1 TB NVME. Wish me luck!
Nice, it should play anything that doesn’t require AVX with a modern gpu
What a blessed video the lord is great
Wow...those speeds look unreal to me. I thought x58 can't surpass 2gb/s.
Nice work 😊
It’s an expensive card that converts pcie 2.0 x8 into a pcie 3.0 x4 so it runs at full speeds
@@cs.studios I'm surprised. I didn't know something like that would be possible :)
@@cs.studiosdid you clone your hard drive or did you do a fresh install on the nvme?
@@cs.studios Hi ! Very nice upgrade ! Can you please elaborate on what in the specification makes the card run at full speed / faster than the cheap model? Is it because it's "dual" (but I thought its not related as it's for 2 NVME drives)? I'd like to be able to understand what to look for in the specifications so I can pick my own model of adapter. Is it simply the speed, regardless of single/dual? Thanks !
It's such a shame the original DUET/REFIND guides all seem to be gone, especially the one from years ago that was IIRC on the win-raid forums.
I just tried the latest guide and refind hangs on "xxxxxx bytes of system memory tested OK"...
I had this same issue using duet on my sr-2 build..i fixed it just by updating to the latest version which fixed my issue. I recommend checking to see if you have the latest build
I have the "Asus P6T" motherboard.
Bu unfortunally there is no bios to support NVMe booting
You can try posting to see if anyone can make a modded bios on the forums
@@cs.studios Thank you.
I will try that.
@@opoxious1592I have a p6t also, did you have any luck?
Dang im really interested in doing this. i love x58 platforms. I wonder if i can do this with a gigabyte x58-ud5
Should be able to, just need bios mod
@@cs.studios I read about another way that lets you boot off a SATA drive to get uefi also, including booting from these nvme. I think that would be even better, but I have to research it more.
Uefi might then allow video cards to use the resizable bar feature. To me, that would be more useful than nvme
I have an x58a-ud7 gigabyte flash the custom bios, but not work
You need to request a modified version on the forum for your specific ssd
PLEASE find a stable shelf for the avr.
Don’t worry I have a new place now with new entertainment stand
My board is a PCware Flame and I discovered that it is a copy of the Foxconn Flaming Blade, master Ismail already created the BIOS for, however, for a different nvme than mine 😔 I have a KC3000. What should I do?
You’ll need to get a bios update with the specific NVMe you will use
Это обычный рэйд контроллер на дисках nvme. Он и без обновления биос обязан работать. Кастомный биос я прошивал для прямой связи nvme ssd с материнкой и в моём случае asus sabertooth x58 с ними работает.
This is not a raid controller. It is a basic pcie x8 to 2x pcie x4 switch. The bios is flashed and supports NVMe booting
@@cs.studiosжаль я не могу купить эту плату для теста.
@@cs.studiosruclips.net/user/shortsBnbwudV8_AI?si=00_98etGzztQSn6C
how long does it normally take for the guy to get back to u with the modded bios i requested one for a gigabyte x58 board 2 days ago so far haven't heard anything back.
I think 2-5 days depending how busy they are
Have they got back to you and all ok, as Im looking to do this with a gig x58 ud5 rev2 board..
@@coxyofnewp no. apparently there was a huge earth quake in turkey and that is were the guy is from. so not sure if or when he is going to be back working on this again. he hasn't logged in to techpower up in over a week. hopefully the guy is ok and will come back at some point.
Now we're just waiting for them to release TPM 2.0 bios mods for X58 so we can actually use the damn TPM 1.2 connectors for TPM 2 modules and be able to play the god awful game called Valorant
Isn't that PCIe port 2.0? How are you getting full speed 3300mb/s?
The adapter I’m using is an expensive one. It takes a PCIe 2.0 x8 port and converts it to PCIe 3.0 x4 so it allows full speeds
Would this be possibly for intel dq45cb?
Hi,
Can this be done with Dell T3500 motherboard? It's using X58 Chipset too, but I did not find DELL name in that website's list.
Technically yes but someone has to mod the bios file
@@cs.studios Thank you. Can someone please create a forum post to request Intel X58 Bios Mod for T3500? Since I cannot create account on that website.
Hello! Have you lagecy BIOS or UEFI? Becouse it's look like uefi. There is not difficult to inklude NVME drive in UEFI bios, But very difficult in Lagecy...( I have Award on board and can't start from NVME / not duet, not clover...😓😓😓😓
This is legacy. There’s no duet or anything on my x58 build
yeeeessssss
Msi eclipse sli, flashed but not work :(
You need to request modified bios with your specific SSD
How did you even find this??
I was looking up bios mods for xeon support. This just came out oct 2022 so it’s quite recent.
@@cs.studios I gave been looking for years, have not looked though in over a year as I thought no one would do anything,
how about chinese board ? huananzhi x58 deluxe?
Might need to dump bios and request on the forums
@@cs.studios do you have tutorial on how to request bios?
Can you run Windows 11 on x58?
Yes
Ah. I know that "IsmailTPC_Hastanesi" men. He is from turkey