That's actually a great video for beginners. Many of those problems require experience to be solved without a guide and this video is just right for that
Sheesh! My G&G CM16 Raider stopped working and had a loose trigger so I did as you said and connected the red wire back since it was disconnected and it works now, btw I've bought the gun and had it for 5 hours when the wire got disconnected. You instantly earned my respect.
Ayy man a good tip to keep those connections tight pull them off and take needle nose pliers and slightly squeeze the metal folds so they hold a better and tighter connections
Had step 4 happen at the field. New to airsoft and some ppp were helping out and found the negative was disconnected. Thankfully saved the night to play airsoft
Thank you airsoft gi my airsoft rifle has made some weird noise, I thought my airsoft was broken or something but this vid help me fix my airsoft rifle🎉
Hello sir, can you help me? I have an aisoft (BB) gun and there's a problem shooting. I'm trying to open the screws of gun, but they are stuck and actually I don't have any. stripped screwdrivers. Waiting for you reply!
Hello sir, can you help me? I have an aisoft (BB) gun and there's a problem shooting. I'm trying to open the screws of gun, but they are stuck and actually I don't have any. stripped screwdrivers. Waiting for you reply!
so for tech work do we have to walk into your place for u guys to work on it or can we ship it since i dont live anywhere near you guys and there is no place near me to help fix my gun?
Just throwing this out there in case anyone has had the same issue. A few years ago I bought an SRC SR-47C from my local field. Brand new, warranty, etc. I ran it about twice every week for a month and at the tail end the wire folding stock simply broke. I didn't drop it, bump it, or in any way harass it, the stock just broke. Unfortunately this happened while I was playing and a pin fell out and was lost to the field, so I couldn't fix the stock. For whatever reason, it seems the fire control system was connected to the stock because it will not fire at all now. Did all the steps that are listed in this video, some that aren't, got the people at the field to look at it, nothing. Wondering if anyone has had the same experience and either managed to fix it or bodged it somehow.
@@cannedgoose3259 I'm not really familiar with your gun, but there might might be running a cable around it to the motor. But I don't think that would be a actual problem. Maybe the fire switch gear is the problem. There is a quarter circle like gear on the gearbox and maybe it got somehow stripped. You have the folding buttstock right? And are your cables running through the handguard?
@@kamilbalogh7267 well, far as I could tell the cables run through the receiver. it's an AK pattern, so under the dust cover is where the battery sits. it's a folding stock, yes
I just took out the front pin on my lancer tactical Lt-29 (needle tail) it was ridiculously tight fit. I had to use pliers. Now it won't go back in as the bore holes are miss aligned. How can i get this back in without sending my gun back. Its a few days old
I know I am a little late, but just the other day I had to take apart my M4 to fix my fire selector, and upon reassembly and firing, it would shoot auto in semi and auto positions. Any ideas how to fix?
Hey I just got a hicapa pistol from Amazon which worked fine at first but later when I put about 5 rounds in it it would go through just three and run out of gas way to quickly, any ideas on how to fix it. Plz see this
I checked this video out after searching how to fix my gun's loose buffer tube. I already knew both of these methods of tightening it but at the slightest of bumps the buffer tube becomes extremely loose. I have full metal CYMA m4 that actually just came in the day that I am writing this and I just cannot for the life of me figure out why it is like this. I don't want to tighten the screw any more because it is to the point I feel I would break the gun by stripping the threads and no matter how tight the castle nut is, tit continues to become loose. There appears to be a pressure fit piece in the tube that the head of the retaining screw uses to hold the stock in that seems to be a little close to the front (towards the receiver) of the buffer tube. I have tried to use my hammer and a long flathead screwdriver to punch it back in but it slides right back down the tube when I screw the tube back on. I would just like an answer as to what I can do about this if anything. I would appreciate constructive and appropriate answer as I am newish to airsoft and this is my first full metal aeg.
I doubt it would help but maybe looking up Cisco's we build your build videos it explains alot about weapon customizing and did a full video on how to change out your stock and buffer too could find something useful in the video he used a method to help keep the buffer nice and tight in it
@@douglasbowden7426 Thanks for the suggestion. I just ended up sending the gun in as it was well within warranty and they sent it back with absolutely zero wiggle. They told me that the interior diameter of the tube was the tiniest bit off, like so little of a difference you would need to use a micrometer to measure it. They just replaced the buffer tube and it works perfectly fine now.
Hi. I bought a new gas pistol and i have problem that the gun is firing too high, even when I set hop up to minimum or unscrew it. I think theres a problem with bucking. I don't know. Sorry for my english.
I have an electric lancer tactical m4 and the bbs keep traveling towards the left and some bbs shoot straight I have messed about with my scope to sort it out but nothing I took off the scope to see if they shoot left and they do so it has to be the gun what would I do in that specific situation? Thank you.
Hey airsofGI, I hope you see this and respond. I bought a gun from you and it feels great though I have not shot it yet because the magazine came broken. Yes. I opened it very exited to shoot because it is my first gun but when I tried loading it all of the bbs shot out. I have tried calling you many times yet you don’t pick up. If you want to talk or get more info please reply to this. Thanks, Eli
Hello, I am sorry to hear about the issue that you are having if you could please email rma@airsoftgi.com with your order number and a description of the issue we would be more than happy to assist you.
Tip for MISFEEDS: aeg users… ditch the hi cappas. Mid cappas feed consistently given you use a respected brand, hi caps always fuck up. M4s get the elite force mid caps on Amazon it’s super cheap for a box of mags. AK users look for waffle mid caps if you want durable and trustable magazines, for basedlite/bakelite enjoyers there isn’t too many strong bakelite mags but I’ve seen people take mid cap internals and put them in real bakelite shells so theres an expensive but Gucci alternative. Pew hard fellow AEGrs
What if this gun sounds fine, with no connection issues or screeching, or blockages, gun seems perfect but bb’s don’t shoot out the barrel, they just fall out when tilted downwards. Literally can’t see or hear anything wrong with it, but bb’s get sent to barrel gun makes right sounds, but bb’s just sit in the barrel and fall out onto floor right at my feet lol.
FrankDad My guy, that was a joke about my build that Daddy Cisco roasted in the last video... The one with the 3D printed tube rail, drop stock, and trigger guard.
my arg m4 is like making a sound like its about to shoot but just doesn’t like its the beginning of shooting and stops not jammed but haven’t checked the pistol grip yet
i had just bought a king arms pdw 9mm but it just stops shooting it will shoot like once and then stop no response from the gun when I pull the trigger. I tried to check the motor height and that didn't do anything as I adjusted it I then check the motor wiring and battery wiring they both seem fine. i feel like it might be my battery so I bought a new battery. Any tips or help though ?
i just bought a brand new valken m mod and the gun isnt working. its making the sound and all, but it wont even shoot. i also see air coming out the front of it. can anyone help me???
what happens if for example you can fire 2-4 shots with out issues and then the gear box doesn't fully pull back the piston? couple of tries its working again and then again 2-4 shots n the same again? this is my current issue.
I have a really stripped screw in the bottom of the handle for my lancer tactical gen 2 nightwing and it is grinded down to the bone. some screw drivers can get it to turn a little bit but it doesnt unscrew and just spins in place. please help meeee!!!!
Hi i just bought a pellet gun the first time i tested it it worked but the next day it cant shoot i cocked it back but something is jamming my gun idk what it is
I mainly use GBBR and I am fairly new to AEG, got a Krytac mk2 M spr I have no idea if I have an issue with my motors, Battery or the wires , but if I try to full auto my Krytac for even 10 sec the Rate of fire starts to go down and eventually the gun just stops , is it just overheating or motor problem or just normal for AEG ? Motor height is perfectly positioned battery is well charged and I didn't have this problem until recently. please enlighten this lost lamb in seek of answers.. peepoSad
@@resolvei9185 actually did , the problem was the battery actually. even though it was well charged,my battery was bloated so it already decreases performance. it wasn't the motor or any parts of the AEG.
my airsoft will scream my name during rainy days says it will wear my face and also leak blood and moan every time when i insert a mag, should i put HPA engine in?
I recently bought a PP-19 Bizon, n jus received it a few days ago. I tested it out when i first got it n it worked just fine, but when i took it to the field tht weekend it would shoot(in full auto) like 2-3 bbs then misfire for 3 sec then shoot 2-3 more. It also seems to do this in semi too. Im using mid-caps tht hold 190...its full metal n it was cold when i tried to play with it, do u think its bc the weather or should i take it to a tech??
AEGs usually perform fine during cold weather. We would recommend contacting the manufacturer of your Bizon for troubleshooting and then seek out a tech if the issue cannot be resolved by the manufacturer.
Today my whole ass battery cable that goes through the buffer tube decided to behead itself at the start of the inner buffer tube. I have no idea what to do now. This was for my g&g pws mk112. Please help GI. 😔
Lmao i bought a g&g cm16 v2, and it fawking gave up when i was TESTING it😂😂 like it started to malfunction before i even managed to bring it up onto the field lmao
I have one fro. Evike that won't shoot any better without a new hop up and bucking. No matter what I do, it runs even worse than the original. Guess don't buy from Evike at all. They suck
Hello sir, can you help me? I have an aisoft (BB) gun and there's a problem shooting. I'm trying to open the screws of gun, but they are stuck and actually I don't have any. stripped screwdrivers. By the way I've same issue. Waiting for you reply!
My dt4 shoots 4 times then you have to unplug the battery to shoot it another 4 times. Pain in the a-- . Ever scenic I bought it. Makes it so i dont even use it
Hello sir, can you help me? I have an aisoft (BB) gun and there's a problem shooting. I'm trying to open the screws of gun, but they are stuck and actually I don't have any. stripped screwdrivers. Waiting for you reply!
I bought a gf 76 yesterday. It did well initially, but today it won't fire at all, I charged the battery 5 hours. The instructions said minimum 4 maximum 6 hours. Using the manuel to look at the problem I am led to think it is the gear box being too tight, the Manuel says to use the hex wrench to loosen the gear box, the only thing it fits is the motor height adjustment, nothing to loosen the gear box. I don't want to waste 130 dollars on something that won't fire, if anyone has an answer please help. It is worth noting the trigger pull is the same, and has the same distinct click, but the motor does not run at all. All wires are properly in place
@@benjamminm5889 it could be anything.. starting from the cables up to the gearbox anything can be broken. you could try to screw around with your motor in the pistol grip but thats actually it. There is a screw you can turn around. Try different directions, maybe this will help. And if it still refuses to shoot you will have to contact an airsoft tech, because screwing around in your gearbox without proper knowledge and equipment will lead you nowhere. If there is no airsfot tech you can contact or your warranty is invalid for some reason and therefore a refund is not possible AND you want your gun (M4?) to work... still plenty of tech vids on YT. But again, i do not recommend this. Good luck, mate
That's actually a great video for beginners. Many of those problems require experience to be solved without a guide and this video is just right for that
Thank you so much. That video helped me fix my gun after my bro inlaw broke it 5 years ago.
Amazing! Thanks
I'm a tech, but I still watched this. Weird...
Same lol
Gotta figure out how to remove the pvc pipe somehow.
If you're a tech, you'll always be keen to maybe learn something new
@@griffin_silbert hello there trapster
@Zeken Live General Kenobi
Sheesh! My G&G CM16 Raider stopped working and had a loose trigger so I did as you said and connected the red wire back since it was disconnected and it works now, btw I've bought the gun and had it for 5 hours when the wire got disconnected. You instantly earned my respect.
Ayy man a good tip to keep those connections tight pull them off and take needle nose pliers and slightly squeeze the metal folds so they hold a better and tighter connections
Had step 4 happen at the field. New to airsoft and some ppp were helping out and found the negative was disconnected. Thankfully saved the night to play airsoft
That stimmy came in clutch
Thank you airsoft gi my airsoft rifle has made some weird noise, I thought my airsoft was broken or something but this vid help me fix my airsoft rifle🎉
Really good video for people having gun problems. Helped me a lot thanks!
Another thing is that sometimes bad quality BB’s can jam up mid/low caps so just get better BB’s.
You earned my sub mate
Didnt realise you had to wind up a hi cap mag like one of those pull back and let go cars cheers
Hello sir, can you help me? I have an aisoft (BB) gun and there's a problem shooting. I'm trying to open the screws of gun, but they are stuck and actually I don't have any. stripped screwdrivers.
Waiting for you reply!
5:54 that sound makes me want to remove my eardrums
lmao same
Thank you I will need this in the future
oh my god, this has helped me so unbelievably much!
thank you!
Hello sir, can you help me? I have an aisoft (BB) gun and there's a problem shooting. I'm trying to open the screws of gun, but they are stuck and actually I don't have any. stripped screwdrivers.
Waiting for you reply!
that kwa looks great
so for tech work do we have to walk into your place for u guys to work on it or can we ship it since i dont live anywhere near you guys and there is no place near me to help fix my gun?
Professionally edited and filmed, informative content and hilarious honestly, keep up the good work brothers! 🫡
Motor connectors are my least favorite part of an aeg. They are flimsy and annoying to solder.
Love this episode man!!! 💪👊
whatever that wiggle thing does saved my life. the bullets just came flying out the end that were stuck
Thanks bro 6:16 tip saved me i thought my gun broke after i press the trigger and gun started to make weird noise and not shooting bb's
Thanks so much this is extremely helpful
what are some tips and tricks to removing the hop up unit and inner barrel? i think mine is just stuck in general. P.S. I am building a G&G CM16 SRL
Just throwing this out there in case anyone has had the same issue. A few years ago I bought an SRC SR-47C from my local field. Brand new, warranty, etc. I ran it about twice every week for a month and at the tail end the wire folding stock simply broke. I didn't drop it, bump it, or in any way harass it, the stock just broke. Unfortunately this happened while I was playing and a pin fell out and was lost to the field, so I couldn't fix the stock. For whatever reason, it seems the fire control system was connected to the stock because it will not fire at all now. Did all the steps that are listed in this video, some that aren't, got the people at the field to look at it, nothing. Wondering if anyone has had the same experience and either managed to fix it or bodged it somehow.
Did you fix the problem already?
@@kamilbalogh7267 Nope!
@@cannedgoose3259 I'm not really familiar with your gun, but there might might be running a cable around it to the motor. But I don't think that would be a actual problem. Maybe the fire switch gear is the problem. There is a quarter circle like gear on the gearbox and maybe it got somehow stripped. You have the folding buttstock right? And are your cables running through the handguard?
@@kamilbalogh7267 well, far as I could tell the cables run through the receiver. it's an AK pattern, so under the dust cover is where the battery sits. it's a folding stock, yes
@@cannedgoose3259 Does it make any sound at all? If not, your motor cables could be unplugged.
Can you do one of these videos on a hi cappa
I just took out the front pin on my lancer tactical Lt-29 (needle tail) it was ridiculously tight fit. I had to use pliers. Now it won't go back in as the bore holes are miss aligned. How can i get this back in without sending my gun back. Its a few days old
Never mind. Got it. The upper receiver wasn't fully seated back. Took some strong force but I got it
Good tips!
GREAT video 🙂
I know I am a little late, but just the other day I had to take apart my M4 to fix my fire selector, and upon reassembly and firing, it would shoot auto in semi and auto positions. Any ideas how to fix?
Wait is cisco sooo dead from #asgiroastmybuild that he is unable to deal with airsoft anymore?
He has mayo therapy to go to. Or so he says.
Bless you! I thought that I blew my engine and it was just the clogged barrel
Thanks I need this
Hey I just got a hicapa pistol from Amazon which worked fine at first but later when I put about 5 rounds in it it would go through just three and run out of gas way to quickly, any ideas on how to fix it. Plz see this
I checked this video out after searching how to fix my gun's loose buffer tube. I already knew both of these methods of tightening it but at the slightest of bumps the buffer tube becomes extremely loose. I have full metal CYMA m4 that actually just came in the day that I am writing this and I just cannot for the life of me figure out why it is like this. I don't want to tighten the screw any more because it is to the point I feel I would break the gun by stripping the threads and no matter how tight the castle nut is, tit continues to become loose. There appears to be a pressure fit piece in the tube that the head of the retaining screw uses to hold the stock in that seems to be a little close to the front (towards the receiver) of the buffer tube. I have tried to use my hammer and a long flathead screwdriver to punch it back in but it slides right back down the tube when I screw the tube back on. I would just like an answer as to what I can do about this if anything. I would appreciate constructive and appropriate answer as I am newish to airsoft and this is my first full metal aeg.
I doubt it would help but maybe looking up Cisco's we build your build videos it explains alot about weapon customizing and did a full video on how to change out your stock and buffer too could find something useful in the video he used a method to help keep the buffer nice and tight in it
@@douglasbowden7426 Thanks for the suggestion. I just ended up sending the gun in as it was well within warranty and they sent it back with absolutely zero wiggle. They told me that the interior diameter of the tube was the tiniest bit off, like so little of a difference you would need to use a micrometer to measure it. They just replaced the buffer tube and it works perfectly fine now.
Hey, my lancer tactical gen 3’s barrel shroud wiggles a bit, know of any fixes?
yo ima come to yalls shop today
Also I'm 17th heheheh
Hi. I bought a new gas pistol and i have problem that the gun is firing too high, even when I set hop up to minimum or unscrew it. I think theres a problem with bucking. I don't know. Sorry for my english.
I have an electric lancer tactical m4 and the bbs keep traveling towards the left and some bbs shoot straight I have messed about with my scope to sort it out but nothing I took off the scope to see if they shoot left and they do so it has to be the gun what would I do in that specific situation? Thank you.
Hey airsofGI, I hope you see this and respond. I bought a gun from you and it feels great though I have not shot it yet because the magazine came broken. Yes. I opened it very exited to shoot because it is my first gun but when I tried loading it all of the bbs shot out. I have tried calling you
many times yet you don’t pick up. If you want to talk or get more info please reply to this. Thanks, Eli
Hello, I am sorry to hear about the issue that you are having if you could please email rma@airsoftgi.com with your order number and a description of the issue we would be more than happy to assist you.
Do a video on how to make FLAT HOP
Hey man, ik im late but my Arp9 hasn’t worked in about 2 yrs. When i pull the trigger all it does is the mosfet blinks red twice. Any solution?
Tip for MISFEEDS: aeg users… ditch the hi cappas. Mid cappas feed consistently given you use a respected brand, hi caps always fuck up. M4s get the elite force mid caps on Amazon it’s super cheap for a box of mags. AK users look for waffle mid caps if you want durable and trustable magazines, for basedlite/bakelite enjoyers there isn’t too many strong bakelite mags but I’ve seen people take mid cap internals and put them in real bakelite shells so theres an expensive but Gucci alternative. Pew hard fellow AEGrs
no rattle, actually feeds, saves time and stress. Deffo buy midcaps
What if this gun sounds fine, with no connection issues or screeching, or blockages, gun seems perfect but bb’s don’t shoot out the barrel, they just fall out when tilted downwards. Literally can’t see or hear anything wrong with it, but bb’s get sent to barrel gun makes right sounds, but bb’s just sit in the barrel and fall out onto floor right at my feet lol.
Thank you for the tips...not too new to airsoft but i build cars and guns so most of this is easy to understand lol
How do I take the pvc pipe that my dad bought me off my gun?
uhhhhhhhhhhhhhhhhhhhhh
Take out the grub screw/pin and put the tip in boiling water to break the glue. Twist to the left and reveal the 14mm ccw threads
FrankDad My guy, that was a joke about my build that Daddy Cisco roasted in the last video... The one with the 3D printed tube rail, drop stock, and trigger guard.
my arg m4 is like making a sound like its about to shoot but just doesn’t like its the beginning of shooting and stops not jammed but haven’t checked the pistol grip yet
Be gentle with your charging handles. They can break. User errors will void your warranty.
Amazing video I had the gearbox lock problem and put it to full auto and it started working thank you so much
i had just bought a king arms pdw 9mm but it just stops shooting it will shoot like once and then stop no response from the gun when I pull the trigger. I tried to check the motor height and that didn't do anything as I adjusted it I then check the motor wiring and battery wiring they both seem fine. i feel like it might be my battery so I bought a new battery. Any tips or help though ?
Hey, my lancer tactical m4 isn’t shooting. The trigger isn’t pulling and I don’t know how to fix it
5:30 so what if my gun has nothing at the bottom……
i just bought a brand new valken m mod and the gun isnt working. its making the sound and all, but it wont even shoot. i also see air coming out the front of it. can anyone help me???
I Have identical situation with sa-fx10 and I can't fix it can anyone help us?
I have a spring SR01 (marine AR) airsoft gun and it will not shoot. I know there are BBS
TYSM I HAD A BROKEN GUN FROM MY BIRTHDAY AND ITS BEEN BROKEN FOR A YEAR
Ive had that screeching noise before but it was because my gears broke. It was a terrible sound
😬😬😬😬
I have a wierd thing in where I shoot there's nothing coming out of the barrel. The pressure goes out of the magazine well
Do you have branch or shop in the Philippines?
What rifle is that in the video?
What gun is this? And can I find the lower anywhere?
My gun is working fine with shooting and rps and fps, but it is loud like loud. It is way louder than it used to any idea for that?
Hey dude, I can’t access my battery due to the little tabs are just too tight, any ideas?
what happens if for example you can fire 2-4 shots with out issues and then the gear box doesn't fully pull back the piston? couple of tries its working again and then again 2-4 shots n the same again? this is my current issue.
dang yall are fast
I just got a sniper a couple days ago and I’ve shot about 300 rounds out of it and now I have bb curve. I’m just trying to fix it
Mine sounds like if the gun is dying like the piston is dead. And it doesn’t wanna fire sometimes even though my lipo is fully charged. What can I do?
My battery over heats and the gears don't even start when I try to fire. Do I need a new battery
I have a really stripped screw in the bottom of the handle for my lancer tactical gen 2 nightwing and it is grinded down to the bone. some screw drivers can get it to turn a little bit but it doesnt unscrew and just spins in place. please help meeee!!!!
my gun is broken and we unlocked the gearbox we did everything and it wnt shoot do you know what i should do
Why is the castle nut not a hex nut?
My gun just doesn’t shoot? Like literly no sound no bullets with a battery there’s just nothing?
Yeah same
Same problem here
Same
I have a glock 19 BB gun and when I shoot it like a lot of air comes out and the bb didn’t come out how do I fix that??
Hi i just bought a pellet gun the first time i tested it it worked but the next day it cant shoot i cocked it back but something is jamming my gun idk what it is
i dropped mine..
In the UK we don't use Orange flash hiders
How do I fix my BB gun from just shooting whenever I plug in the battery it goes full auto without me touching anything even if it’s set to sade
Why am I watching this I’ve been playing for years
I have a worn gear. Now it doesn't work... I don't know what to do. But I'll try to do something to work again.
I mainly use GBBR and I am fairly new to AEG, got a Krytac mk2 M spr I have no idea if I have an issue with my motors, Battery or the wires , but if I try to full auto my Krytac for even 10 sec the Rate of fire starts to go down and eventually the gun just stops , is it just overheating or motor problem or just normal for AEG ? Motor height is perfectly positioned battery is well charged and I didn't have this problem until recently. please enlighten this lost lamb in seek of answers.. peepoSad
The same things is happening to me right now, did you manage to fix it?
@@resolvei9185 actually did , the problem was the battery actually. even though it was well charged,my battery was bloated so it already decreases performance. it wasn't the motor or any parts of the AEG.
@@royalreacts4190 Ok thank you so much, I was worried my aeg broke😅
my airsoft will scream my name during rainy days says it will wear my face and also leak blood and moan every time when i insert a mag, should i put HPA engine in?
I recently bought a PP-19 Bizon, n jus received it a few days ago. I tested it out when i first got it n it worked just fine, but when i took it to the field tht weekend it would shoot(in full auto) like 2-3 bbs then misfire for 3 sec then shoot 2-3 more. It also seems to do this in semi too. Im using mid-caps tht hold 190...its full metal n it was cold when i tried to play with it, do u think its bc the weather or should i take it to a tech??
AEGs usually perform fine during cold weather. We would recommend contacting the manufacturer of your Bizon for troubleshooting and then seek out a tech if the issue cannot be resolved by the manufacturer.
Today my whole ass battery cable that goes through the buffer tube decided to behead itself at the start of the inner buffer tube. I have no idea what to do now. This was for my g&g pws mk112. Please help GI. 😔
Lmao i bought a g&g cm16 v2, and it fawking gave up when i was TESTING it😂😂 like it started to malfunction before i even managed to bring it up onto the field lmao
On my pistol when I rack the slide instead of it loading one bb it loads all of them the get stuck in mechanism I really need help 😭
I took my shit apart and couldn't find the issue so.. yea it's going to the shop
I have one fro. Evike that won't shoot any better without a new hop up and bucking. No matter what I do, it runs even worse than the original. Guess don't buy from Evike at all. They suck
My walter ppq green gas has a loose trigger and every time I shoot all the gas shoots out
you forgot about using bad bbs can jam up your gun
indeed! Good catch!
My dust cover won’t open idk why I pull the charging handle and nothing happens
so when i shoot my mag slowly starts to unwind in the gun what do i do
So my airsoft in single doesn’t shoot the bb it just makes the noise and pops sound sweak
Hello sir, can you help me? I have an aisoft (BB) gun and there's a problem shooting. I'm trying to open the screws of gun, but they are stuck and actually I don't have any. stripped screwdrivers.
By the way I've same issue.
Waiting for you reply!
When I cleaned the barrel and unharmed it. The gun shot like 4 times and then stopped again.
Same here, Probably just have to return it with warrenty
Big daddy boy needs Gamersupps if he wants that keto diet
My dt4 shoots 4 times then you have to unplug the battery to shoot it another 4 times. Pain in the a-- . Ever scenic I bought it. Makes it so i dont even use it
my gun had detached motor connectors and opening up the grip fixed it tanks.
Hello sir, can you help me? I have an aisoft (BB) gun and there's a problem shooting. I'm trying to open the screws of gun, but they are stuck and actually I don't have any. stripped screwdrivers.
Waiting for you reply!
my gun is acting weird. when i pull the trigger i can hear the motor revving but no firing help?
Me trying not to puke at the end
Mine didn't perform at all out of the box. Someone put the motor in backwards.
I bought a gf 76 yesterday. It did well initially, but today it won't fire at all, I charged the battery 5 hours. The instructions said minimum 4 maximum 6 hours. Using the manuel to look at the problem I am led to think it is the gear box being too tight, the Manuel says to use the hex wrench to loosen the gear box, the only thing it fits is the motor height adjustment, nothing to loosen the gear box. I don't want to waste 130 dollars on something that won't fire, if anyone has an answer please help. It is worth noting the trigger pull is the same, and has the same distinct click, but the motor does not run at all. All wires are properly in place
I also don't live in an area with any techs around, and it is unlikely that I can return it
Why all the lancer tactical gen 2 m4s sold out tho
🤷♂️
hey i have a question. I put a fully charged battery in my gun and nothing happens. No shot no gears nothing, any help?
Does your battery actually work?
@@warlockiii1846 I’m going to check with my friends battery and see if that’s the issue but assuming it’s not the battery any ideas?
@@benjamminm5889 it could be anything.. starting from the cables up to the gearbox anything can be broken. you could try to screw around with your motor in the pistol grip but thats actually it. There is a screw you can turn around. Try different directions, maybe this will help. And if it still refuses to shoot you will have to contact an airsoft tech, because screwing around in your gearbox without proper knowledge and equipment will lead you nowhere. If there is no airsfot tech you can contact or your warranty is invalid for some reason and therefore a refund is not possible AND you want your gun (M4?) to work... still plenty of tech vids on YT. But again, i do not recommend this. Good luck, mate
Hey I yust bought my first