Sprinter van DIY conversion - Installing speakers in front doors
HTML-код
- Опубликовано: 1 окт 2024
- In this video we show you how we installed our Hertz DSK 130.3 Speakers using the factory speaker's base. Below is a time stamp in case you need to jump to a specific part of the process in the video, as well as the amazon affiliate links to the tools we used. As an amazon associate we earn from qualifying purchases. Your price stays the same!
0:50 disconnecting center speaker
1:13 disconnecting battery master switch
1:57 Taking off door panel
6:57 Disconnecting factory speaker (woofer)
11:11 disconnecting factory tweeter andRunning wires for the new tweeter
18:46 Mounting the cross over
Hertz DSK 130.3 (DSK130.3) 5-1/4" Dieci Series Component Speaker System
www.amazon.com...
Ratcheting Wire Crimping Plier Tools
www.amazon.com...
Wire Stripper, Self-Adjusting 8 Inch Cutter Crimper, 3 in 1 Electrical Wire Stripping Tool
www.amazon.com...
Waterproof, Automotive Connector terminals
www.amazon.com...
Panel Tools
www.amazon.com...
Roller
www.amazon.com...
Kilmat
www.amazon.com...
Fantastic explanation. I feel competent now after watching how it’s done. Thank you very much sir 😎👌☀️ 🔊
super easy - Thanks and good luck!
That trick with the wiring gaiter on the door just gained you a subscriber lol. we have 4 sprinters and I don't think if ever got that thing back on any of them.
Awesome! Lee does have sooo many tricks! Thanks for subscribing and hope you find more tricks you can use in our other videos. We're also always happy to listen to advise (Libby is our first van and we're learning as we go) :)
Where do I order those new upgrade speakers
The speakers we used were ordered on amazon - not the best but much better than stock. (good speakers for the cost) might add a self powered / self enclosed sub as these don't have a lot of bass - but we knew that going in 😎
The factory tweeter adapter mentioned... if you look at the instructions, the tweeter has three tabs on it. One on the top and two at the bottom, which match similar notches on the adapter ring. These are really hard to see unless you look at the diagram in the instruction first.
Thank you!!!