Excellent job! I made almost the exact same thing. The only differences are the plain ball bearings are pressed into an aluminum housing and the collet chuck shaft moves fore and aft in the bearings (don't have to do 2 things at once).
Very nice, I like the simple design with the bushing at the rear and how you used the almost finished tool post drill to build the tool post drill bushing.
Great little job Dude,i just built myself a 72 point indexing system,i have the Warco WM180 lathe and i was looking for a toolpost drill,i don't want anything complicated so your little solution is perfect,as i was watching your vid i jumped into your links and bought the equiptment to do the job,thanks for this,you did me proud :-)
below are the lathe tools i use er11 chuck www.banggood.com/custlink/3GDvE5nO6q Motor Flange Bearing www.banggood.com/10pcs-Motor-Flange-Bearing-F608ZZ-Metric-Ball-Bearings-Part-p-1057305.html?p=070519238739201308J6 Lathe tools used goo.gl/BzuUVj Standard inserts goo.gl/gzSnw5 Aluminium non ferrous metal inserts goo.gl/Zzm6GY other carbide tools i use goo.gl/j6LH4a Standard inserts goo.gl/bUkNVe Aluminium non ferrous metal inserts goo.gl/uRcdND Quick Change Tool Post www.banggood.com/custlink/vK3mJYQoo9 Cobalt Drill Bit Set www.banggood.com/custlink/m33GhoqQgF Stick welder www.banggood.com/custlink/vDvKRBfsKk Tig Welder www.banggood.com/custlink/KGmmR4wQ61 Ebike Parts www.banggood.com/custlink/3Dv3bT3Q5l Ebike Wheel www.banggood.com/custlink/KKDKNf7t7S 48V 350W 10.4AH 20 inch E-bike www.banggood.com/custlink/3DDGn1TIl5 CrimpTerminals Connectors www.banggood.com/custlink/mK3GAuT8oI Wire Crimp Tool www.banggood.com/custlink/DvD3sfwIaa Handy Good Cheap Tools *MMA welder i would like www.banggood.com/custlink/3vGDsufVnM *MIG welder i would like www.banggood.com/custlink/K3KKs7T5nO *TIG welder i would like www.banggood.com/custlink/Gm3DBGhSsi *Tin Snip www.banggood.com/custlink/KmmmnwTVMl *Stick Welder www.banggood.com/custlink/DDGKsw7PU9 *Welding Clamps www.banggood.com/custlink/mKKGbuwF1j *Machinist Hammer www.banggood.com/custlink/KmDmQ1ut11 *Screwdriver Set www.banggood.com/custlink/KmmKATw5w4 *Precision Screwdriver Set www.banggood.com/custlink/K3v3Nuwi8V *cordless Angle Grinder www.banggood.com/custlink/GDKmAFL7s4 *Carbide wood turning tools www.banggood.com/custlink/KKmKQwfS8S * flex shaft Rotary Tool www.banggood.com/custlink/3KK3Z35Boi *palm Router www.banggood.com/custlink/GDGGbT1iSj *F-Clamp www.banggood.com/custlink/vKDGbfuZiB *Double Edge Pullsaw www.banggood.com/custlink/mvGvb7uIZN *Cordless drill www.banggood.com/custlink/DmvGNTT9iT *Mitre Box www.banggood.com/custlink/33KvbuTSj3 * Impact wrench www.banggood.com/custlink/mKDK6g6Bts Above are affiliate links and in the comments it costs you nothing, if you do not want to use links search on goggle more info Thanks.
Not your fault I am deaf, but would appreciate it if you could add closed caption (CC) to your video's. Really helps ol deaf goats like me to follow along. Thanks in Advance-John
yeah need to make a expanding arbour that fits down the rear of spindle bore then make or buy indexing plate, make plunger type locking mechanism. Thanks for commenting have a good weekend
I actually made something very similar. It's a good using the flange bearing. I should of went that method. Are you planning on making a way to index the lathe?
Thanks my friend yes very useful kit to have, will save me buying a rotary table for the milling machine. now i need to make index plate for dividing cylindrical work piece into equal number of divisions and some how attach it to the lathe. I don't think i have ever seen a commercial made tool post drill. dremel or grinder attachment yes, but seems to be a few people make and use them, saves time setting them up on drill or mill. All the best have a great weekend.
im very puzzled, why you use a poor tool of an hacksaw to cut your pipe when you have a LATHE!! Oh i say pipe because it is a pipe and not a Tube, Good project and thanks for sharing.
Thanks Raymond. yeah RUclips's new update, means if your subscribes haven't got NOTIFICATIONS enabled they may never see your video you just uploaded. RUclips picks videos and displays what is best for you on what you have recently viewed Much appreciated have a great weekend my friend
@@JAYZWORKSHOP Much better than people who must have "background music" Most of the time I comment them that if I want music in the back ground, I play my own music to my own taste. beautiful job. One of the first things I'll make when my lathe arrives. kind regards Hans
let me know what you think comment, thanks
Thanks sir
You could put a milling cutting bit in that to put a keyway in a shaft.
Excellent job! I made almost the exact same thing. The only differences are the plain ball bearings are pressed into an aluminum housing and the collet chuck shaft moves fore and aft in the bearings (don't have to do 2 things at once).
@@ricksweetser1683 thanks my friend appreciate it. Have fun turning good day to you.
Good Job.
Thanks
Very nice, I like the simple design with the bushing at the rear and how you used the almost finished tool post drill to build the tool post drill bushing.
Stemer114 thanks very much appreciated. Have a good day all the best.
Nice job. Grind the end 8 mm of the collet-shank square, to enable you to use an adjustable tap-wrench for accurate threading of grub-screw holes etc.
Thanks. yes very good idea, At the moment using a keyless chuck i attach when tapping.
Thanks for commenting appreciated.
have a good week.
Now I want to make one lol good job
Great little job Dude,i just built myself a 72 point indexing system,i have the Warco WM180 lathe and i was looking for a toolpost drill,i don't want anything complicated so your little solution is perfect,as i was watching your vid i jumped into your links and bought the equiptment to do the job,thanks for this,you did me proud :-)
below are the lathe tools i use
er11 chuck www.banggood.com/custlink/3GDvE5nO6q
Motor Flange Bearing
www.banggood.com/10pcs-Motor-Flange-Bearing-F608ZZ-Metric-Ball-Bearings-Part-p-1057305.html?p=070519238739201308J6
Lathe tools used
goo.gl/BzuUVj
Standard inserts goo.gl/gzSnw5
Aluminium non ferrous metal inserts goo.gl/Zzm6GY
other carbide tools i use
goo.gl/j6LH4a
Standard inserts goo.gl/bUkNVe
Aluminium non ferrous metal inserts goo.gl/uRcdND
Quick Change Tool Post www.banggood.com/custlink/vK3mJYQoo9
Cobalt Drill Bit Set www.banggood.com/custlink/m33GhoqQgF
Stick welder www.banggood.com/custlink/vDvKRBfsKk
Tig Welder www.banggood.com/custlink/KGmmR4wQ61
Ebike Parts www.banggood.com/custlink/3Dv3bT3Q5l
Ebike Wheel www.banggood.com/custlink/KKDKNf7t7S
48V 350W 10.4AH 20 inch E-bike www.banggood.com/custlink/3DDGn1TIl5
CrimpTerminals Connectors www.banggood.com/custlink/mK3GAuT8oI
Wire Crimp Tool www.banggood.com/custlink/DvD3sfwIaa
Handy Good Cheap Tools
*MMA welder i would like www.banggood.com/custlink/3vGDsufVnM
*MIG welder i would like www.banggood.com/custlink/K3KKs7T5nO
*TIG welder i would like www.banggood.com/custlink/Gm3DBGhSsi
*Tin Snip www.banggood.com/custlink/KmmmnwTVMl
*Stick Welder www.banggood.com/custlink/DDGKsw7PU9
*Welding Clamps www.banggood.com/custlink/mKKGbuwF1j
*Machinist Hammer www.banggood.com/custlink/KmDmQ1ut11
*Screwdriver Set www.banggood.com/custlink/KmmKATw5w4
*Precision Screwdriver Set www.banggood.com/custlink/K3v3Nuwi8V
*cordless Angle Grinder www.banggood.com/custlink/GDKmAFL7s4
*Carbide wood turning tools www.banggood.com/custlink/KKmKQwfS8S
* flex shaft Rotary Tool www.banggood.com/custlink/3KK3Z35Boi
*palm Router www.banggood.com/custlink/GDGGbT1iSj
*F-Clamp www.banggood.com/custlink/vKDGbfuZiB
*Double Edge Pullsaw www.banggood.com/custlink/mvGvb7uIZN
*Cordless drill www.banggood.com/custlink/DmvGNTT9iT
*Mitre Box www.banggood.com/custlink/33KvbuTSj3
* Impact wrench www.banggood.com/custlink/mKDK6g6Bts
Above are affiliate links and in the comments it costs you nothing, if you do not want to use links search on goggle more info Thanks.
Brilliantly done. Just looking for this type of item. Now I’m making one. Thanks
Mork the Builder thanks for commenting appreciated. Have fun building
Just wondering the best way to make sure the bar is dead in line with the tube. Any tips?
Very nice job. I built one along time ago for my South Ben , it works great for indexing. I also like your cross slide and compound slide dial knobs.
Thanks my friend much appreciate you comment, Have a good day
Excellent job, nice to see creative minds at work, really enjoyed it, I think I will make one, thanks for posting!!
Thanks buddy best of luck with your projects.
why did you used a hacksaw if you have access to a lathe, a file is never used as a spacer,your bearing was too loose.
that really worked out well, very handy tool.
MissouriOldTimer thanks yes it does what I wanted it to do so I am happy with the outcome.
All the best.
Not your fault I am deaf, but would appreciate it if you could add closed caption (CC) to your video's. Really helps ol deaf goats like me to follow along. Thanks in Advance-John
No your not that deaf 😊their is no Vocal audio to this video. thanks for commenting all the best have a good day.
Great video and great tool. I have seen other similar videos but I really like yours. Thank you for sharing.
Thanks
A very useful tool. Very professionally made dear. Great job. Do add a bloc motor on board if possible
Thanks very much, Have a good day.
hi good idea works well only thing need to lock the chuck some how
yeah need to make a expanding arbour that fits down the rear of spindle bore then make or buy indexing plate, make plunger type locking mechanism.
Thanks for commenting have a good weekend
Nice work my friend
I actually made something very similar. It's a good using the flange bearing. I should of went that method. Are you planning on making a way to index the lathe?
Very nice,thank you for sharing, have a good day
Thank you for comenting appreciated. have a good day all the best.
Very nice work Jason! Very impressive.
Thanks my friend very much appreciate your input .
All the best have a great weekend.
that would be very useful, I don't know a lot about lathes but I don't think I ever saw that kind of attachment.
Thanks my friend yes very useful kit to have, will save me buying a rotary table for the milling machine. now i need to make index plate for dividing cylindrical work piece into equal number of divisions and some how attach it to the lathe.
I don't think i have ever seen a commercial made tool post drill. dremel or grinder attachment yes, but seems to be a few people make and use them, saves time setting them up on drill or mill.
All the best have a great weekend.
There actually pretty common place. He did a nice job though
Nice job. Great idea!
John Emmons thanks for commenting much appreciated have a good day.
Excellent , very excellent work !!
Thank you appreciated, Have a great weekend my friend.
Thanks , good weeken.. 😊👍
Great instructional video. The collet shaft link is good but the link for the motor bearings is. “404”. Do you have an alternate source? Thanks
Very nice Mod!
do you have a 125mm Chuck on your Mini Lathe, if yes, are you pleased with it?
greetz Daniel from Austria
Very nice I will make one to my selvf
thanks
Thanks for all the thumbs up
Can u use a ban saw?
Nice work. I’ll use my mini mill. Which mini lathe is that?
Not sure how you insured the square bar was in line with the tube axis?
Saubere Arbeit, Glückwunsch!
Thank you very much.
Bangood links don't work they sold out or product discontinued
Well done
thanks very much, have a good day.
You could have welded the bar to the tube first, then turned the ends for the bearings.
Muito trabalho em uma peça que que só pega um tamanho único de broca, poderia se substituída por um mandril, pois aceitaria varios tamanhos de broca
im very puzzled, why you use a poor tool of an hacksaw to cut your pipe when you have a LATHE!!
Oh i say pipe because it is a pipe and not a Tube,
Good project and thanks for sharing.
spudnick1uk hacksaw was the best tool for the job, Thanks for commenting have a good day.
Nice project!
Thanks. Have a good weekend,all the best.
What’s tgat piece of log dangerously close to the chuck, a cartoon dynamite? Good job on the tool post drill.
Thanks very much. All the best have a good day
Nice..! Was the lathe chuck locked when cross drilling? If so how. thx
set the chuck in low gear
F IN RUclips!!!! SWITCHED OFF NOTIFICATIONS!!!!!!! GRRRRRRRR! Great video my good friend. Sorry about outburst.
Thanks Raymond. yeah RUclips's new update, means if your subscribes haven't got NOTIFICATIONS enabled they may never see your video you just uploaded. RUclips picks videos and displays what is best for you on what you have recently viewed
Much appreciated have a great weekend my friend
Do you by any chance make and sell this device?
You have a lathe its pretty simple to make. i am not much good at machining , so if i can do it i am sure your can just give it a try.
@@JAYZWORKSHOP ok you forced my hand, I'm buying a milling machine : )
Sir how do that collet and holder
you can get one here
collet holder www.banggood.com/custlink/3GDvE5nO6q
collets www.banggood.com/custlink/mGKK2sEwQB
Added noises are bothersome. Great video though.
Thanks for commenting. I haven’t added any noises.
Have a good day
Jace
@@JAYZWORKSHOP Much better than people who must have "background music" Most of the time I comment them that if I want music in the back ground, I play my own music to my own taste. beautiful job. One of the first things I'll make when my lathe arrives. kind regards Hans
@@hanspijpers2100 thanks very much appreciated . Have a good day.
I do not believe! the guy owns a lathe and cut a steel tube with the bow saw. Tsk, tsk, tsk
btw you spelled seem wrong it seam! just saying.
Well not bed considerring I can’t spell .
Some pain to understand the comments. Too many typos unfortunately !
Nice
Thanks have a nice weekend.
DIY TEK NUT good job
seem. = seam
Хакання неприємне. Посадка підшипників прослаблена.