Clutch Cable Repair Kit
HTML-код
- Опубликовано: 28 сен 2024
- Failures can happen. Emergency clutch cable repair kits cost about $50.
In this video I will show you step by step instructions on how to make your own for a lot less.
Don't get stuck on the side of the road because of a broken cable that only cost a couple of dollars. Carry one of these small packages on your bike to help yourself or a fellow rider continue on with their journey.
I live in Canada and I picked up the 3/32" cable and the 1/4-20 x 1/4" set screws from Home Depot.
I picked up the Dorman #03336 assorted cable stop package from Canadian Tire.
![Tee Grizzley - Blow for Blow (feat. J. Cole) [Official Video]](http://i.ytimg.com/vi/wNLN5xsx5dc/mqdefault.jpg)
Couldn't be a more clear concise video. Awesome.
Such a good dude, man. Sharing your knowledge and passing it on, encouraging others to help the other riders, not just themselves.
G'Day from Down Under! Just finished adjusting my throttle cables and servicing the clutch cable on my 2015 Magnum. Your videos were a great help. Thank you for your efforts Paul!
To non-mechanically inclined noobs such as myself, you are a living god. Thanks for the easy to digest info, sir!
Business opportunity for you Paul, make them and sell them! Just like the hockey puck ;) You could call them 'Paul Saves Your Ride', just a thought. Good job.
Another excellent video! Please think about doing one on replacing brake pads and bleeding brakes. Your videos are so easy to follow and understand!
Hi Wade, I already made a video of replacing the rear brake pads. You can see it here ruclips.net/video/Xo6XKMK4FSc/видео.html
Absolutely great! Hope to see you do one on installing and bleeding your brakes!
Thank you, Paul. Another excellent video. I have done every single thing to my 2015 Vic XCT that you've covered in your video series...and my bike is a better ride as a result. Keep up the good work. After this pandemic thing runs it's course, it would be great to attend a "Meet, Greet, and Ride with Paul Pomerleau Event". (Hint).
Absolutely amazing. I wish I could just leave my 2014 CC up there and let you go through everything...lol.
Even tho I don't have a bike I like what you said after the project 👍🏽
Exactly what I needed for my Goldwing. Thank you sir
Thanks again Paul. Watched your rr brake pad replacement. Excellent!!!!!
Thanks! I'm having to use these cable stops, and they didn't really seem to me to be that safe. I'm going to check into your ideas about how to make that connection inside those cable stops safer. That's my big concern.
This man is a legend.
Another great video Paul.
I’m a sport bike rider, I’m not a big fan of cruisers/harleys or the people that ride them. They’re always super disrespectful towards me just because I ride a sport bike.. but this dude seems like a nice guy, and this video just saved me today.
Great video and informative how to. Thanks
Great upload, very knowledgeable, ive been wondering what itd take to make a clutch cable, ive heard their the achilles heal of the victories, i have a 2014 vision, i wonder if the clutch cable is the same length
Great Vid as always Paul!
It would be awesome if you share where you get the cable ends ( and cable as well ). I’ve heard that garage door cable works too, but I haven’t actually looked at it to see if it’s a 7 strand.
(I do know how it’s wound determines how flexible vs.how much it stretches and the clutch cable is the low stretch winding)
Good point. I will add the info into the video description box as well. I live in Canada and I got the cable from Home Depot and the cable stops from Canadian Tire.
Me too Paul, down the north west part of Lake Ontario. Good to know CT has the cable stops!
Hey Paul, it looks like the Home Depot cable is 7x7, whereas the OEM is 19x1, have you looked at the difference in fit and stretch?
I’m sure In a pinch it doesn’t matter. But considering the insane Polaris pricing on replacements, it would be great to make it a more permanent solution.
(Yeah I was already looking at swage tools when you posted your great vid!)
The overall thickness is still 3/32" in diameter. The 7x7 will be more flexible than the 1x19 so it should be able to handle the motion at the lever end and not break as easily as the 1x19. I would imagine the set screws will also have more to bite into on the 7x7 just because there are more strands. Come to think of it, I would guess that the 7x7 is a better choice of cable for this application. Let me know what you think.
@@PaulPomerleau You may be on to something there, since the breaks happen at the ends where the cable is flexed. I find it interesting that the japanese manufacturers get it right by adding a pivot at the clutch end to reduce/eliminate cable flex. And.... If Polaris had made the clutch lever (at the clutch end) they would have reduced the loading on the cable, made the engagement point more progressive and made the easy pull "solution" pointless, without the problems the easy pull has of being too much leverage, creating a much too wide engagement/adjustment range. But they have fixed this if you look at the Indian Challenger, including different cable routing to get rid of the steel tubing bend. Love my Vic, but the clutch cable engineering fell down a bit. I'll have to try the 7x7 cable in spite of the 1x19 being chosen as it would have the least amount of stretch.
Good info!
Hey Paul, love your videos. I have an idea for a video, caring for your Victory in the age of dwindling parts availability. I’m in the US and I’ve got to believe it’s even worse in Canada.
I love this. Thxs
You are awesome!!!!
Great improvement
FYI I got ahold of j and s jack and they ship to Canada. Is there a good method I could use to put them in touch with you?
Thank you for looking into this for me. I did some research and found that a lot of their air/hydraulic bottles are leaking and also they are behind on delivery of their products. So I have decided to build my own. Thanks for helping me on this, I appreciate it.
youre the man
Paul does the 3/32 cable have a plastic coating on it by chance?
Mine did not have any plastic coating.
@@PaulPomerleau thank you for your reply.
Where do you get the steel cable from
I got it at Home Depot.
@@PaulPomerleau awesome, did you get the cable stops and set screws there also and would they be available at Lowe's
The cable stops I got at an automotive store. Canadian Tire in my area, but they are available anywhere. The cable and set screws were at Home Depot but I imagine Lowes would also carry it. Thanks for watching.
@@PaulPomerleau many thanks
West Marine or any boating store that has supplies for sail boats - they use it for rigging. And it will be stainless.
Emergency repair kits cost 50 bucks. I can get 2 clutch cables for my bike from Amazon for that price and be good to go.
I hope you buy a Indian too, we need these “how to” videos..so very little information is available
I have a clutch problem with my 106. When cold is very jerky (difficult to tak off from stand still). Looks like it is not only me as I see may people commenting this video: ruclips.net/video/lcNeOJBL-98/видео.html Do you think I shall replace my clutch? If yes which one will you recommend? Any possibility for a video on clutch replacement procedure?
Are you talking about a stickiness (jerky) on the clutch lever? Hard to get it into the friction zone? When the bike is off, push in the clutch lever and let it out slowly. Does it stick a bit and bind a bit? If so, it's your cable.
@@PaulPomerleau It is happening only when bike is starting for the first time (no matter hot or cold). It feels like clutch has a quarter of a second grip then next quarter of a second slips and then again and again. Feels like vibrating between grip and no grip. Also I have a hydraulic clutch not cable. The previous owner installed it. For now my solution is to up RPM then pulse is very fast and not feel that bad. But if I will try turn from the stop using clutch friction then that may be no happy day. Loosing power in middle of the slow turn is always an issue.
Pro tip you can use the the cable from a mechanical trunk lever from a car as well
Great vídeo.
Man, the Imperial system sucks, I wish everyone was on metric!
Keep the videos coming, I can't get enough!
Hi Alex, good to hear from you. You are correct, metric is so much easier. Canada seems to be stuck in the middle. Fuel, temperature, speed and distance is all metric but things like hardware is still in Imperial measurements. It gets confusing. Probably because most of the items comes from the States.
Well done sir! Thank you!
For your cable, I would suggest going to a marine store. Specifically, one that sells stuff for sailboats. They will have the cable in stainless if that's what you want. You will find two types of wire rope - a) for standing rigging. That is for the wires that hold up the mast and life lines that run around the deck. This stuff is somewhat flexible but not a lot. In the diameter needed for clutch cables, this would likely be pretty flexible and should be fine. The other type is b) for running rigging. Running rigging is for hoisting sails and that sort of thing. It goes around pulleys so has to be more flexible. If you don't live near a marine store, try a place like West Marine online.
Edit : I just unwound the end of my old Honda CBR cable and it is .081" diameter and is 1 x 19 wound. That is, there are 19 strands wound around each other into a single cable. That would suggest in a boat shop, it would be for standing rigging. If you see cable such as 7 x 7, it would mean 7 strands, each made up of 7 smaller strands and then the whole thing wrapped around each other into the single larger wire.
Edit 2 : I just bought 4 feet of 1x19 stainless wire at my local marine store for $2.65 Cdn / about $2.00 U.S.
Excellent tip. Thank you for this. I am so used to going to big box stores that I never thought that there are better places to go, and there are certainly a lot of boating stores in my area. I am going to check them out to compare. We all get ahead in life by sharing ideas. Thanks again.
Great video Paul!! Would you mind doing a demo of actually changing the cable? I’ve never had to do it, not sure how to. Thanks!!
Yup, that's going to be my next video. I will be sacrificing my bike cable for it.
@@PaulPomerleau thanks, I also want to see this.
@@PaulPomerleau ever get around to doing this?
You are the best and wow you come up with some great ideas I was hoping that you would show how to feed it through the clutch
Actually, I was going to sacrifice my clutch cable and cut it off to show how to install the replacement, but most people don't like long videos and this one was already over 7 minutes long, so I had to do it this way.
@@PaulPomerleau thanks I guess it's just feeding it thru the cable holder and putting on the end stopper and adjusting the length
My next video will be how to install it. Keep an eye out for it.
Stole my video