How to use degreaser OK-121
HTML-код
- Опубликовано: 9 июл 2024
- You can watch in this video how to clean parts that are completely lubricated and have dirt accumulated on them, using the degreaser OK-121.
Usage
The product is placed in a sprayer. The oil is squeezed onto the part to be removed. Wait 1-2 minutes. It is wiped with the help of a cloth. Rinse with water. It is concentrated. Depending on the contamination of the oil, you can use it by diluting it with water between 1/2 and 1/20.
How can I buy the product?
You can purchase the packaging you need after clicking the link we have shared below. Special packaging can be done for bulk purchases.
Oil remover: www.ozkimsan.com/yag-sokucule...
Contact information
Address: Address: Mermerciler Sanayi Sitesi, 13. Cadde No:17 Floor: 2 Beylikdüzü/İSTANBUL
Phone: 02128715242
Email: info@ozkimsan.com
0:00 Start
0:02 We spray the product
0:30 Product used
1:00 We wipe it with a cloth
1:10 The oil is completely removed
2:07 We spray the product on the second piece
2:26 We wait for a short while
2:35 We wipe it with a cloth
2:51 We wash with plenty of water
3:19 End
You can ask your questions about the oil remover OK-121 by calling our customer representative line or writing in the comments field. Хобби
Kolay gelsin 👍
Günay Hanım merhaba;
Değerli yorumunuz ve güzel dilekleriniz için çok teşekkür ederiz.
Selamlar.
Elinize sağlık.
Serhat Bey merhaba;
Değerli yorumunuz için çok teşekkür ederiz.
Selamlar.
İkinci parçada daha fazla belli olmuş yağın tamamen söküldüğü.
Yutkun Bey merhaba;
Haklısınız. İkinci parça biraz daha fazla yağlıydı. İlk parça boyalı olduğu için anlaşılmadı.
Selamlar.
Ürünü fırında kullanabilir miyim yoksa sadece bu tür yerlerde mi kullanılır ??
Elis Hanım merhaba;
Tabii. Kullanabilirsiniz.
Selamlar.