Mr......Is such a person. He made me understand the ways one can repair the RO in such a simple manner. It's hard to find such genuine person now a days. Thank you do much....
superb video, very informative, thanks bro 4 making this type of video, I never see before thos type of informative video one's again thank you. make more & more videos thank you
Hello Pankajji.. Thanks for providing correct solution and solving i-nova model issue. Appreciate your timely advice. The issue was.. transformer was burnt suddently. Replaced it with 12-0-12, 1.5 Amp transformer bought from Amazon. After fixing new transformer, when power was switched on, the red light used to light and then orange light used to light and then again light used to go back to red light with beep sound. Was thinking that problem could be something else. So, replace ldr, fuse etc but issue was not resolved. Checked the output voltage of transformer which was jumping from 14v to 8v. As you suggested, replaced transformer and water purifier started working fine.
Sir, Nice video. I want to know how to solve the problem if 12 volts supply doesn't come to water sol end even after 15 mins ? Sol.coil is ok. All indications are also glowing, With regards .
Pankaj ji me Piyush Bhagat bol raha hu mere pas aquagard ka i nova model me red light aata he baad me yellow light aane ke bad green light nahi aa raha he to kya folt he batayega
हमारे पास एक्वागार्ड का नौवां मॉडल है उसमें रेडलाइट भी आती है या लो भी आती है और ग्रीन भी आती है परंतु बीप की आवाज आती है परंतु पानी नहीं आ रहा क्या किया जाए
I have same purifier. Techncian changed the filter candles but now the main switch trips when machine starts. Technician says problem in the elecric board. The problem persists even after supply given from other board. Why?
your video gave me practical know how. My Aquasure crystal filter starts beeping with red light blink after 2min of water filtering. what can be the problem? please suggest.
My aquaguard classic model is not working. It's red light is blinking continuously. What to do now? Can pcb be repaired or do I have to replace whole pcb?
Hi i have the same water purifier, the problem i am facing,is that even without switching on the water purifier, the water start flowing, can you tell me what is the problem. and how i can resolve it. Thank you.
In my neo model i am not getting continue water.. some times when I press music button it starts flowing thn again stop. So for getting filtered water i have to press music button.. i think there is some problem in PCB.. pls suggest the repair
hi, I have aquaguard inova, with transformer. Suddenly it stopped getting switched on. The repair guy says transformer is not available. He says he will replace transformer with smps, with the same (transformer) pcb....is that possible?
@@waterpurifier_pcb-repair First, thank you so much for replying...very kind of you! We asked even the local eureka forbes service guy if an original transformer is available, they say they no longer make the transformer. We asked everywhere in the local repair (biggest in Amritsar), they say the transformer is not available, but they can rewind the same one for us, but no guarantees...hence the guy says better to put smps. Do you think i can get one online? Thanks in advance!
hello brother...mera aqua guard inova hai..us mai uv lamp nhi chal raha aur ldr ka sensor maine alag kar diya hai or uski wires bhi.....abhi sab kuch sahi hai bus uv nhi chal raha........ldr sensor lagaane se chal jayega uv lamp??
Nice video. Sir my aquaguard Infinity SMPS power IC burned, what shall I do? Need to change the whole SMPS or can we repair the SMPS by replacing the power IC. Kindly suggest. Thanks.
Bhai mere aqua mei same problem h jase he mei flow button press krta hu to turant rend blink krti h ,,,to kya mera sv khrab h ya bord mei koi problem h,,I nova model h mera
Sir, ur clip is valuable. My aqua guard : crystal plus : UV+ paani nahi detaa hey. 3 buttons hey . Flow button , Music button and Power button....ON karte hi , orange light and green light saath mey hoti hey. Fir , wo bandh ho kar , power ki RED light hoti hey. Kuchh time baad , orange light hoti hey , fir wo bandh ho kar , Music ke saath green light hoti hey lekin , paani nahi aataa. Ye problem suddenly hi huaa hey. Solution plz. Aqua guard jyaada USE nahi kartaa hu. Kabhi -kabhi hi use kartaa hu.
Aap tino switch on mat kareya 1st power switch. After some time green light will glow then press Flo button. No need to press music button. If water not comes then check water supply.if it's OK than chek catrige.
pankaj ji mere aquaguard mein usmein problem yeh aaraha hai ki koibhi light nahai jalraha hai sirf beep sound aaraha hai . meiane pcb ko machine se bahar nikalka sab connection machine se disconnect kiya uske badd sirf bahar sirf power diya toh par bhi beep sound sirf aa rha hai 10 volt aa raha hai par uv high ossilation nahi aaraha hai . sare transformaer check kiya sab thikn dekharaha hai ? kaya yeh microcontroller ic short hone ka waja se aaraha hai?
@@waterpurifier_pcb-repair @Shyama Is your problem solved after changing ldr? My water filter has same issue. After red light orange light comes. During this time uv glows. after few second orange lights goes back to red light with bips. When it goes back to red, uv light goes off. This gets repeated until power is switched off.
@@waterpurifier_pcb-repair When I switch on the power, the red light will be ON and then the Orange light will be ON and then comes back to Red light with beep sound. I checked the UV tube, it blinks and goes off. Is it tube or ldr problem? Tube doesn't light continuously or only blinks when the power is switched ON. Please respond. Thanks.
Aquasure uv smart me LDR nahi hai ,phir green light late kyo aati hai ,paani derse aata hai kabhi green light nahi aati hai kya problem hai pl battaiye
Thanks for information
❤❤
Tnqu sir
Thanks sir......👍👍
You save may money ......
I find my machine problem....n fixed ❤️❤️
Mr......Is such a person. He made me understand the ways one can repair the RO in such a simple manner. It's hard to find such genuine person now a days. Thank you do much....
superb video, very informative, thanks bro 4 making this type of video, I never see before thos type of informative video one's again thank you. make more & more videos thank you
Hello Pankajji.. Thanks for providing correct solution and solving i-nova model issue. Appreciate your timely advice. The issue was.. transformer was burnt suddently. Replaced it with 12-0-12, 1.5 Amp transformer bought from Amazon. After fixing new transformer, when power was switched on, the red light used to light and then orange light used to light and then again light used to go back to red light with beep sound. Was thinking that problem could be something else. So, replace ldr, fuse etc but issue was not resolved. Checked the output voltage of transformer which was jumping from 14v to 8v. As you suggested, replaced transformer and water purifier started working fine.
Bhai jop tube light is noh working Kia karna
Aquagaurd eterniti UV censor kaise melenga please
very good very good very very good ❤️❤️
Pls rely bhai
Sir redy hone ke bad green light blink kar raha hai kya karna padega.plz sugest me.
Sir where do we get smps pcb and what is the price.
UV lamp is not growing what is the
Check pcb
Agar uv lamp jal na raha ho to kya kare
Check uv lamp or pcb
Sir, Nice video. I want to know how to solve the problem if 12 volts supply doesn't come to water sol end even after 15 mins ? Sol.coil is ok. All indications are also glowing, With regards .
aquaguard innova not starting ,upper side 3 three not coming
Check ac 18v on pcb 2yellow wires
Very nice explanation
Thanks for informing electrical problems
Sensar agar bypass karna hai to 1k rejistence laga dijiye
What if uv lamp get dead
Very nice explanation.
Hi
Pankaj ji me Piyush Bhagat bol raha hu mere pas aquagard ka i nova model me red light aata he baad me yellow light aane ke bad green light nahi aa raha he to kya folt he batayega
Check sensor
Good teacher. !👍
Sensar sv cail or pcb nayadal ke bhi red siganl bilink Ho rahe
Send me fault video
Nic video sir,Thanku
Yadi sensor Nahin Mil Raha Hai To Kya lagaen
Buy on line
Search for ldr
UV light is not blinking
Fuse blast problem after speech on
Some thing short in pcb
Classic UV machine Dead and UV lamp nehi jalrahe
Red light is glowing
@@waterpurifier_pcb-repair , no
@@sunayansaha3262
Check pcb.230v input on socket
Sencer kise badle inova water purifier ka r kitne me aata hai
Can not understand
My inova purifier sencer is not working , how much cost this
@@mdfarhadhasan2466
Open machine. Middle of uv chamber sensor is avlable.it costs 250
UV tube
Change karne ke baad bhi nahi jal rahi hai please batai ye kya problem hai (same model hai) thanks
Pcb fult
मेरा युही लाईट नाही चल रहा है उसके लिए क्या करना सर कोनसा ट्रांजिस्टर
Which model
सर क्रिस्टल मॉडेल मै कभी कभी कभी ग्रीन के बाद रेड blink करता है
Check sensor
Sir mera nova model hai uski sirf yellow light stable rahti hai kya problem ho sakti hai please help me....
Change photo sensor
@@waterpurifier_pcb-repair ok sir
Sir maine sensor change kar diya ab red light blinking aur beep beep ho rha hai
@@manumanga1934
Send video on whatsapp
Thank you sir aapke instructions se mera aquaguard sahi ho gya sir aapne bahot achha guide kiya you are a great person thank you so much sir......
Mere aquasure me light green bhi aati hai fir bhi water nahi aa raha hai
Check candles
Thank you for great information
हमारे पास एक्वागार्ड का नौवां मॉडल है उसमें रेडलाइट भी आती है या लो भी आती है और ग्रीन भी आती है परंतु बीप की आवाज आती है परंतु पानी नहीं आ रहा क्या किया जाए
एक्वागार्ड मैंने खोल कर देख लिया है और मैं उसे कुछ हद तक चेक करके देख सकता हूं इसलिए आप मुझे बता सकते हैं कि उसमें टेक्निकल प्रॉब्लम क्या है
I have same purifier. Techncian changed the filter candles but now the main switch trips when machine starts. Technician says problem in the elecric board. The problem persists even after supply given from other board. Why?
Thankyou sir
Excellent information
your video gave me practical know how. My Aquasure crystal filter starts beeping with red light blink after 2min of water filtering. what can be the problem? please suggest.
If uv lamp is glowing then sensor fult
Replaced the faulty sensor/ LDR. My water purifier is working now. Thank a lot for such a valuable guidance.
Thank you Sir For Solution sir our bhi solution dijiyega🙏
SMPS se kya chalegi
Can not understand
My nova model POWER supply not extended, after switching. What may be the problem.
Aqua sure uv smart ka pcb mumbai me kahan aur kitneka milega ya aap doge pl
New required or want to repair ur old pcb
To repair how much money ,and time ,new how much ,time and money which will be beneficial pl reply immediately it's question of water
new
@@nasirbagban9732
Whatsapp me @ 8917341707
Very good sir
Thanks for the information. My system is starting with red then yellow light and then gets green light. But there is no water. Can you please advise.
Check candles
Sir I have aquaguard crystal uv plus model. When power on button push first red led gets on and gets blown please guide mi what is the problem
Red blink change sensor
Can u repair my pcb if yes can contact u? I m frm mumbai
Whatsapp me
Meri I Nova hey pcb aap bhej sakte ho
Yes
Thanks god bless you
Hii sir ji agar app. Mera . Comment dekh raheho . Tho please mujhe reply Kare .
Yes
Sirji, I have opened I nova aquaguard and transformer is fine. How do I find the fault in PCB? Thanks on advance.
Sir classic plus me jumper laga k kaise reset kare....plz make a video
Aquaguard I nova class a UV based water purifier he vo chalu me bandh hogaya to me Kiya karu
My aquaguard classic model is not working. It's red light is blinking continuously. What to do now? Can pcb be repaired or do I have to replace whole pcb?
Chek sensor.
Pcb can be repaired.
Hi i have the same water purifier,
the problem i am facing,is that even without switching on the water purifier, the water start flowing, can you tell me what is the problem. and how i can resolve it. Thank you.
Uv saplay nehi arehi he
Nice videos sir
Nice imformation,crystal model ka repairing kaise kare
In my neo model i am not getting continue water.. some times when I press music button it starts flowing thn again stop. So for getting filtered water i have to press music button.. i think there is some problem in PCB.. pls suggest the repair
Send a video on what's app
So nice
What if pump model starts for few minutes again gets off and again starts and after few time stops
How to open crystal machine and full service
hi, I have aquaguard inova, with transformer. Suddenly it stopped getting switched on. The repair guy says transformer is not available. He says he will replace transformer with smps, with the same (transformer) pcb....is that possible?
Buy transformer from local market
Ask 12-012, 2amp transformer
@@waterpurifier_pcb-repair First, thank you so much for replying...very kind of you!
We asked even the local eureka forbes service guy if an original transformer is available, they say they no longer make the transformer.
We asked everywhere in the local repair (biggest in Amritsar), they say the transformer is not available, but they can rewind the same one for us, but no guarantees...hence the guy says better to put smps.
Do you think i can get one online? Thanks in advance!
Sir classic UV, vu chamber quartz tube available in market
No
Aqua guard booster classic- continued beeping problem
Where is reset button on nova model after filter cleaning .....
Check 2pins on pcb (filter)
Short them for 1min
Hello mujhe ye Jan na tha ke classic model Ka aquaguard Ka spare parts Kaha milenga
Authorized service provider Or from me
thanks you sir,
sir, aqua guard ka repairing parts kaha se milega, plz bataye
Sir. I have aquaguard classic. Can u suggest where i can buy its pcb online. And also purity sensor.
No. Only authorized service center
@@waterpurifier_pcb-repair thnx for the information. Really helpful.
Authorised Service Centre is very costly ......N boys are not perfect trends, not work properly......very bad experience...
Go online ....
In my case i have to change pcb light was blinking rest everything was ok what could be fault in pcb
Send video on whatsapp
What is your number
@@sudhirthingalaya4967
8917341707
hello brother...mera aqua guard inova hai..us mai uv lamp nhi chal raha aur ldr ka sensor maine alag kar diya hai or uski wires bhi.....abhi sab kuch sahi hai bus uv nhi chal raha........ldr sensor lagaane se chal jayega uv lamp??
What about red light only on, and nothing happens then ?
Check pcb
Hello sir I have acq crystal same machine it automatically stop working what to do
Give me a video on whatsapp
@@waterpurifier_pcb-repair it is not working indicator all LED are off.
Sir crystal aquasura red led yellow led and bule led on horahe. What is problem
Send video on whatsapp
mere pass aquaguard nova model hai usmain paani ke button dabane par music bhi aa raha hai
Sir,
Orange lights keeps on blinking don’t moves to green. Pls suggest solution
Aquaguard Crystal Model
Check music switch is on.
Change sensor.
If not ok then change pcb
Aquaguard / Aquasure and all water purifier repair Sir, Where i can get sensor. Can you send me address?
Aquasure uvuf prime ke bare me batao ,red light blink kar rahi hai
Error code printed on side of machine
I have classic model, can you share transformer data please, and availability.
12 0 12. (1.5) amp
Same case,all ok but water not coming
Which light is glowing
Your video is of very poor video quality.very informative video.make again with better camera
Nice video.
Sir my aquaguard Infinity SMPS power IC burned, what shall I do? Need to change the whole SMPS or can we repair the SMPS by replacing the power IC. Kindly suggest.
Thanks.
If u can get power ic then it is possible
red light is blinking continues in spite of remove sensor and coil not working kindly give me the solution
From where we can get new pcb
Authorised service provider
Thanks sir
Bhai mere aqua mei same problem h jase he mei flow button press krta hu to turant rend blink krti h ,,,to kya mera sv khrab h ya bord mei koi problem h,,I nova model h mera
Check sv first
Led bulb aur sensor mumbai main kaha shop hai,near dadar
Buy online
To usme blinking pro aa raha he uv nehni jal raha he pls batayne
Aqua classic bip problem hai koi solution hai sir
Sir, ur clip is valuable. My aqua guard : crystal plus : UV+ paani nahi detaa hey. 3 buttons hey . Flow button , Music button and Power button....ON karte hi , orange light and green light saath mey hoti hey. Fir , wo bandh ho kar , power ki RED light hoti hey. Kuchh time baad , orange light hoti hey , fir wo bandh ho kar , Music ke saath green light hoti hey lekin , paani nahi aataa. Ye problem suddenly hi huaa hey. Solution plz. Aqua guard jyaada USE nahi kartaa hu. Kabhi -kabhi hi use kartaa hu.
Aap tino switch on mat kareya
1st power switch. After some time green light will glow then press Flo button. No need to press music button.
If water not comes then check water supply.if it's OK than chek catrige.
Thanks
pankaj ji mere aquaguard mein usmein problem yeh aaraha hai ki koibhi light nahai jalraha hai sirf beep sound aaraha hai . meiane pcb ko machine se bahar nikalka sab connection machine se disconnect kiya uske badd sirf bahar sirf power diya toh par bhi beep sound sirf aa rha hai 10 volt aa raha hai par uv high ossilation nahi aaraha hai . sare transformaer check kiya sab thikn dekharaha hai ? kaya yeh microcontroller ic short hone ka waja se aaraha hai?
Uv lamp not glowing
Chek wires
Uv lamp
Change sensor
Please share how to repair
Uv light not glowing.please give suggestions
Check while switching on uv is glowing and then it is getting off.
If such problem change ldr.
@@waterpurifier_pcb-repair @Shyama Is your problem solved after changing ldr? My water filter has same issue. After red light orange light comes. During this time uv glows. after few second orange lights goes back to red light with bips. When it goes back to red, uv light goes off. This gets repeated until power is switched off.
@@waterpurifier_pcb-repair When I switch on the power, the red light will be ON and then the Orange light will be ON and then comes back to Red light with beep sound. I checked the UV tube, it blinks and goes off. Is it tube or ldr problem? Tube doesn't light continuously or only blinks when the power is switched ON. Please respond. Thanks.
@@mamtaphirke6829
Change ldr
If can't solve then contact me on whatsapp
Aquasure uv smart me LDR nahi hai ,phir green light late kyo aati hai ,paani derse aata hai kabhi green light nahi aati hai kya problem hai pl battaiye
There is no ldr in this model
Pcb may be defective
Dost me ek dr classic hevi duty aquagard ka kaam karraha ta
U want to repair a water purifier
Sir mere pass inova model hai usme red light k baad jab orange light aati hai wo blink karne lag jaati hai green light nahi aati. Kya karna chiye
Change ldr . which is located on uv lamp
iska cartridge kese khole. ye dusre se diffrent hai. baki aquagrd ka cartridge upar rehta hai. par iska niche hai. pls vdo banaye
Open front cover u will see candles
but all the screw are in back side
@@saptadeepdhar
Total 6 screw to open.top2 & bottom 2
Middle 2.middle 2 screws r marked by circle.same as top and bottom screws circle.
ok dada. thanks. i will contact u if i face any problem