THANKS! Worked on my mini 2 battery, got error until I connected it to 9V battery by vcc and gnd pins. After that read and other actions worked and it was charging after that.
Do you know if it's possible to eventually replace cells in the battery and then use that programming to reprogram the battery to think that it's brand new?
@@DrFailov I have about 10 brand new M300 batteries that were kept about a year unused. Now they are dead without life and those things are expensive I’ll really love to revive them… please what can I do
Hi good day , i have tried what is in the video, the battery voltage on all 4 cells are below 3.3 v and it would not charge, same mavic 3 battery. Any help would be appreciated
With this board and software can you rewrite battery capacity for a higher capacity cell? And will the drone recognize that it’s a higher capacity cell so it knows when to return home?
@@DrFailov Okay, I saw some 3500mah lipo cells on Aliexpress specifically for the Mini 2. If I desolder the original lipo cells from the bms and solder on the new 3500mah cells on the bms will it work?
@@DrFailov Yes sorry I didn’t mention that, I will obviously need to connect to the bms using cp2112 board after I replaced the cells. Cool tutorial thank you👍🏽
смотрят те кому нужно, вот и не понять тебе.. Аккум у DJI умный, как только просел ниже положенного, так в блокировку становится. На видео процесс разблокировки...
ERROR:could not write block to 0x44 ERROR:could not perform SMBus read 0x00.. that i incounter when i click the read. but its connected to programer chip.
THANKS! Worked on my mini 2 battery, got error until I connected it to 9V battery by vcc and gnd pins. After that read and other actions worked and it was charging after that.
Do you know if it's possible to eventually replace cells in the battery and then use that programming to reprogram the battery to think that it's brand new?
@@maxsinventions8913 yes, it's possible, all you have to do is the same, but with replaced cells
@@maxsinventions8913 on new firmwares it will not work: .1100 and older is working
Is there new link for the group? I want to thank you and I successfully unlocked the battery.
t.me/+goUDc8gYZl8zNjlk
It’s says it expired link
@@sinke90ns link not expired, maybe you've banned for some reason
Is there way to comeback in group? I think it’s very usseful?
It worked, thanks
Please give me aplication dji baterai repair😮
Thanks for this amazing video. I will like to do the same for M300 batteries
This method is not suitable for M300 batteries, unfortunately
@@DrFailov I have about 10 brand new M300 batteries that were kept about a year unused. Now they are dead without life and those things are expensive I’ll really love to revive them… please what can I do
@@ms_vibe9918 when batteries is unused for long time, then its chemistry is degrading
Thnks buddy
Hi good day , i have tried what is in the video, the battery voltage on all 4 cells are below 3.3 v and it would not charge, same mavic 3 battery. Any help would be appreciated
Disassemble battery and charge cells to equal state, then you will be able to unlock it
@@DrFailovit unsealed and clicked the clear pf2 tab , it was successful, I got the charge light to blink then it stopped
@@bernardharewood1686 because cells not balanced or discharged
Hi, the unsealed battery is permanet? After we change the cell without unsealed again. Because my battery is cell was bigger and i want to change it.
Hi, clearing PF2 is permanent and battery works as intended until PF2 triggered again by some problem like over discharge or unbalanced cells
@@DrFailov if i change the cell, i need to clear pf2 again? Thanks for your reply.
@@diki578 yes, every time when cell is disconnected from board, battery locks
Спасибо !!!
Hi ! Nice video and good infos, thank you !
Can you provide a link to download your version of dji battery killer my friend ?
Available in telegram group:
t.me/+goUDc8gYZl8zNjlk
@@DrFailovlink expired
@@Djidroneservice maybe you were banned, link works
@DrFailov @Miniq27 didn't see it there, what's the name?
which window version you are using for this module ? Thanks .
@@ericbachvn this was windows 10, but any modern version will work
Hello brother please give me dji killer software please
Battery mavic 3 manufactured 2022 cannot be unsealed. Is there any solution?
Yes, downgrade it
Hello friends, I just bought the device and I have this problem: the battery is dead. Can anyone help?
for mavic 3 pro cine
@@SerkanBAYRAKTAR hi, your default option is to issue warranty replacement. It's best option to get battery with good chemistry
@@SerkanBAYRAKTAR if you can't get warranty replacement for some reason, then you can follow this instruction and likely it will help you
With this board and software can you rewrite battery capacity for a higher capacity cell? And will the drone recognize that it’s a higher capacity cell so it knows when to return home?
Yes, it can.
But without changing the cells it will not affect actual flight time
@@DrFailov Okay, I saw some 3500mah lipo cells on Aliexpress specifically for the Mini 2. If I desolder the original lipo cells from the bms and solder on the new 3500mah cells on the bms will it work?
@@Angelokrto No, then you will need to unlock it using instruction in my video
@@DrFailov Yes sorry I didn’t mention that, I will obviously need to connect to the bms using cp2112 board after I replaced the cells.
Cool tutorial thank you👍🏽
Ничего не понятно, но очень интересно
смотрят те кому нужно, вот и не понять тебе.. Аккум у DJI умный, как только просел ниже положенного, так в блокировку становится. На видео процесс разблокировки...
get the role of cp2112 replaced by arduino?
Not with DJI Battery Killer software
How about for mavic 2 pro
Works the same way
Please
Привет! У меня есть и не могу разблокировать
Where can I download the software?
Yes, you can download it in telegram group
t.me/+goUDc8gYZl8zNjlk
@@DrFailov this link has expired.
@@alermlima means you already banned for some reason
@@DrFailov Banned?
Hi, how can I join the Telegram group? It’s paid?
No, here's it:
t.me/+goUDc8gYZl8zNjlk
But please follow instructions on pinned message
@@DrFailov I already joined but I was banned.
@@alermlima say me your tg name, I'll try to give you second chance 😄 But follow instructions, it's important
@@DrFailov @alermlima. I don't even have time to think. I've already been banned. 😄
it works for mini 2 battery?
Yes, on same way but different pinout and voltage
ERROR:could not write block to 0x44
ERROR:could not perform SMBus read 0x00..
that i incounter when i click the read. but its connected to programer chip.
@@butzmusicvlog5150 bms not powered or dead
@@butzmusicvlog5150 Hi, did you manage to solve this? I have the exact same situation and don't know how to solve it
@@kangaroo-nm5nn yes
😂 ясен пень так и будет, нужно было зарядить каждый пакет до 4,2
Тут все ок, напряжение подходит. Дальше зарядка справится
Як з вами зв'язатися