Indian Scout - Dean Speed Belt Guard Install

Поделиться
HTML-код
  • Опубликовано: 24 май 2018
  • Installing a custom belt guard from Dean Speed. Matches the custom sissy bar I also got from them. Looks great and saves some weight. Adds some flair to a pretty bland location on the bike.
    dean-speed.com/index.php?route...
  • Авто/МотоАвто/Мото

Комментарии • 34

  • @deathwrenchcustom
    @deathwrenchcustom 6 лет назад +3

    Dean Speed!! Great guy, great products, great service!!

  • @kevindorel9141
    @kevindorel9141 6 лет назад +1

    Hey Man, i´m riding a Scout myself and it´s my first Motorcycle at all. I never worked on a MC befor and your Vid´s are helping me big Time changing stuff. Just wanna stop by saying "Thank you" for taking the time putting those Vid´s out. You are also big in explaining Stuff the way i get it.

    • @1ManWrenching
      @1ManWrenching  6 лет назад

      That’s awesome. Thanks for the feedback. That’s my goal in making these videos.

  • @old_wizard
    @old_wizard Год назад

    That clip goes on the bottom front. It keeps the wires from dropping down against the kickstand. With the Dean Speed belt cover, I would put it between the block and the spacer, so it can do it’s job properly.

  • @jay_fast
    @jay_fast 6 лет назад +1

    Just did mine. That little black tab. Looks like it keeps the crank position sensor wires tucked up above the kickstand.

  • @Semjazah
    @Semjazah 6 лет назад +4

    Hey Man, i´m riding a Scout myself and it´s my first Motorcycle at all. I never worked on a MC befor and your Vid´s are helping me big Time changing stuff. Just wanna stop by saying "Thank you" for taking the time putting those Vid´s out. You are also big in explaining Stuff the way i get it.
    Greetings from Lübeck,Germany

    • @1ManWrenching
      @1ManWrenching  6 лет назад

      Thanks for the feedback. That’s been my goal with these videos. Show everyone that they can take on these jobs themselves. Saves money and builds pride. 😊

    • @chainsawmoto5388
      @chainsawmoto5388 6 лет назад

      I feel the same you’re videos are very informative thanks man

  • @mark15vintage9
    @mark15vintage9 6 лет назад

    That plate with the slots in it, is for the center nut on the belt drive gear. The slots allow for the nut to be in different positions and gives you room to still put the locking plate on so the nut cant back off.

  • @davephillips4974
    @davephillips4974 Год назад

    Nice job also love the Corbin seat l have one on my Scout absolutely beautiful best right ever all the best Deadhead Dave

  • @joedavis6377
    @joedavis6377 6 лет назад

    Thank you for the video! Looks slick! Is the adjustment plate you referenced just a keeper so the nut doesn't back off?

  • @caseyroskwitalski4647
    @caseyroskwitalski4647 6 лет назад +1

    Another good video!

  • @jay_fast
    @jay_fast 6 лет назад +1

    Looks great. I have one from joker machine coming. Eventually. Been on back order in a while.

  • @miguelbrown65
    @miguelbrown65 6 лет назад +1

    I really dig that sissy bar

  • @Boobtube.
    @Boobtube. 6 лет назад +1

    @ 5:12 into video. That "adjustment" is for the nut lock plate, The slots allow you to get the locking plate on, no mater that position the large hex locking nut is at. Hope this makes sense. Excellent "cover" plate btw.

  • @jipplejapple3347
    @jipplejapple3347 6 лет назад +1

    That's pretty cool

  • @Trollygag
    @Trollygag 6 лет назад

    Cleaning chain is a small price to pay for more efficient drive and more wheel power/torque. Especially when so many Scout riders drop $1000 for a stage 1 to get them to the same numbers and feeling that the stock bike would have had with a chain drive and greater torque transfer efficiency.

  • @GruntHarley
    @GruntHarley 5 лет назад +1

    I think that pulley cover looks awesome. I'm just not a fan of the front part of the cover being open. Probably doesn't make a difference. nit picking I guess.I would get black washers from a local hardware store.

  • @tonytalley9358
    @tonytalley9358 Месяц назад

    What seat is that?

  • @Txcowboy80
    @Txcowboy80 9 месяцев назад

    I weighed the stock exhaust.....22 lbs. My bike is going to weigh under 500lbs once I'm done with all these light weight add-ons.

  • @chainsawmoto5388
    @chainsawmoto5388 6 лет назад

    I feel that Belts and chains have there positives and minuses and it all depends on what kinda look you’re going for I’ve kinda wanted to do a chain conversion on my bike in the future
    On a side note it’s really strange that your bolts so corroded i seen your clutch video witch prompted me to check out all my primary bolts just in case but they looked new as hell could it be your climate ?

    • @deathwrenchcustom
      @deathwrenchcustom 6 лет назад

      The corrosion is actually a chemical reaction between the two different metals. Nothing to do with climate. That's why anti-seize. :)

  • @undeciphered1
    @undeciphered1 4 года назад +1

    Can this be installed without taking off the stock cover?

  • @Aglassact77
    @Aglassact77 6 лет назад +3

    Hey buddy , been watching some of your videos and think they're good. One question though, when your riding down the highway what's to keep your pant leg flapping in the wind from getting pulled through the belt drive? I think some of these after market companies have unpractical designs sometimes , but hey when your leg gets sucked in the belt and your back wheel stops at 70mph no problem, the bike looked good !🤣🤣🤣🤣🤣🤣🤣

  • @tunefully1792
    @tunefully1792 4 года назад

    The black washer thing held the wires above your shifter arm. Kind of pointless but its a factory thing.

  • @peachstate08
    @peachstate08 Год назад

    The 2 different Indian heads look out of place next to each other - but as long as you like it :)

  • @MychCrowGames
    @MychCrowGames 2 года назад

    This product really look awesome, but i think that loses protection...

  • @kevindorel9141
    @kevindorel9141 6 лет назад +1

    is there any product that can make this bike abs, i crushed my scout on rainy day because of no abs

    • @1ManWrenching
      @1ManWrenching  6 лет назад

      It was the factory tires being utter junk in the rain that caused the accident. But unless you have a donor parts bike to swap EVERYTHING electrical/electronic off of, I don’t know of a way to add ABS. I wish it were standard rather than optional. It certainly would be nice.

  • @geoffozevans4500
    @geoffozevans4500 6 лет назад

    If you could use the original bolts it would match up with the other factory by a showing 👍👍😎

  • @yoshit9819
    @yoshit9819 6 лет назад

    nice