How to Professionally Install Speakers into an Audi A4
HTML-код
- Опубликовано: 12 сен 2024
- Support My Channel on PATREON: goo.gl/P8rLWn
FACEBOOK Page: goo.gl/iEE27T
VLoging RUclips Channel: goo.gl/al5HLa
GoPro RUclips Channel: goo.gl/WPHQIm
Shop: goo.gl/X18CZF
Hey Guys!
Today I pretty much finished off that audi system with the two sets of rockford fosgate p16-s component speakers that I didn't get to install last week.
Im quite happy with how well the custom wooden baffles came out and after all that it sounded good!
Just wish I had less camera troubles. :/
Choose to be Happy & I will see you next time.
Ka Kite Ano
Really nice speaker install . Amazing what you can accomplish with out all the fancy tools, the heart of a true installer.
The adhesive mounting of the tweeters is certainly workable. However, when you have tweeters with a threaded hole in the back plate or magnet, why not use a shallow screw and a piece of back strap to rig an easily removable bracket mount? You can also wrap electrical tape around the blackstrap if you are concerned about grounding the magnet. Just a thought. Another great vid!
Hey there, first time viewer here. Thanks for the theory behind your choices, and instruction for deciding whether or not to build something custom or just modified fit. Helps newbies like me alot ! Do you happen to have any of the dimensions for the final housings or draft sketches by any chance ?
My mounts were made by a shop that way and they had to be replaced due to moisture (2005 A4). Going to use a cutting board (High Density Polypropylene) for my new ones. Good video tho.
Huge difference in quality, good buy on new camera!
but the rockford speakers look so ugly tho i still prefer paper cone than plastic
Love your commitment to craftsmenship
Huge step up in video quality, great video!
I don’t think any flush trim bit is good for using plastic as a template because the bearing transfers heat from the blade. Good video I like the new camera. When I had my shop I made mdf templates of the holes and rings that I would use most.
If youre making templates back to back, of course, your bit will get hot. If you take your time and keep your bit cool with a router table it's one of the best tools in car audio fab.
Great work buddy, great video. Will be following your channel 🤘
How are you James? When i looked up auto sound and security it says permanently closed. Just wondering if you still do car audio installs
bro i know this is old as but the fact you have mdf rings at all or use mdf at all for speaker mounting means your not on a level thats acceptable either mdf will fall apart soon as it gets damp solid abs or marine ply are the only acceptable options in doors. i wont even use mdf for sub box its heavy as shit when birch ply is beautiful , light as a feather and solid as a rock with even better acoustic properties than mdf .its expensive but worth every cent
Man that camera is nice, the three baffles are probably to stop the magnet from hitting the window.
Haha that Rangi remark had ne laughing. The Tu Rangi Vice.
You need a teflon flush trim router bearing for dealing with plastics.
Thank you
Awesome video man. Now I know how to remove and replace the junk German pods. Owning and working on an Audi is a love hate relationship, like that skank you hate but can't stop banging.
I used silicone to install custom mounting plates where speakers would not mount to anything, looks dodgy but dose a great job
He sounds like Chriss Griffin on the Intro
How I normally do those speakers is I ripped the cone out and then cut the basket and then put the after market speaker in the factory housing
Rocky Bundrick that’s exactly what I did when I fitted focal ps165fx in a silver one of these not long ago.
If you go into my playlists and find the Audi A4 playlist you will see what I did.
This method is more time consuming but in the end I was more confident with this install.
I hear you went totally understand I watch the vid when you posted it but for some crazy reason I let it slip my mind sorry about that your new cam looks good like the quality enjoy how you do your post because it's pretty much in real time and your winging it just like I do when I do a little install
it seems like you guys are reusing old furnature for mdf for stereo installs in customer cars? Theres an old seat cusion haldf unstaples and also a kitchen cupboard you traced your pods onto has a hinge recess routered into it
Great show. Have you ever used CDT speakers? If so your thoughts. Thanks in advance.
I actully have a question, shall i put a spoiler on my Audi A8? Do u know if it’ll look good or bad?
Why didn't you replace the tweeters?
when you install this speaker do you need to install something else? I have a Audi a4 b8 Avant, can I install this one?
Hi, I have a 2014 A5 and my passenger, driver side, and front left & right speakers aren’t working. Only the subwoofer in the front works. Do you know what could be the problem. Car is not tinted and I’m at 50k miles if that matters.
Bro how can I contact you I need some advice to what sound system will deliver some pure quality sound with quality bass in audi A1. Was looking at getting 4 rockford punch mids, dont know what amp and a 15inch punch subwoofer? I dont know what much about sound but the previous guy at sound place recommended something... went all Rockford and it was sick. Oh and two tweeters
I have a 2014 A6 with a Bose system, it has a subwoofer mounted in the Hat Rack, are there any subwoofer you could recommend to replace in the stock location? And could I still use the factory amp or should I upgrade to a new amp.
Upgrade the amp
I got an audi a4 b7 how did you wore up the stereo to turn off with ignition off as it keeps flattening my car battery cheers dude
Get a CANBUS dapater, its the only way, otherwise connect the powering for the stereo to the Mirror fuse, that fuse turns on when the car is on. but CANBUS is easier and more practical.
You can get a battery grip and have 2 batteries in there
Also who do you watch on RUclips 4 audio
and where is vibrodamping material?
Those tweets are gonna be a bitch to take out if they ever want to upgrade.
What tape did you use behind the speaker baffle?
what camera are you using?
Similar for the A6?
Any recommendations for affordable set speaker, sub set soon get my first car suzuki alto budget 300,- / 400,- dollar/euros
any idea for AVANT sub?
Any recommendations on which amp is best to use with a Focal 33KX sub?
GotiPodz 7000 watt CT Sounds amp #SoundmanCA
Ethan Hays yeah sure if he wants to annihilate it
GotiPodz skar audio LP 1001 D should work good on that sub It's relatively decent amplifier for the price hey I like it and also don't forget the thousand and 1500 watt punch amp either
Top notch quality on the video side, but something is to be done with the audio. Nasty whine through most of the video, like something interfering with the mic.
He'll yea I like it been waiting
How much
guys which is better TS-A1605C or TS-A1606C
1606
what generation A4 is this?
A4b7
Such a wee good video. Please stop using the word wee. You use it an awful lot.
Two words pal. Router table.
God loves Kiwis
That camera seems to be making alot of weird static noise sometimes. annoying :-(
Nice Camera much better quality vids
please sell me a set of these
I have an A8, its a LOT better i think..
I made it yourself thanks to woodprix plans. I think it's the best way to learn how to build it in the cheapest way.
Use that goop of o found out you put goop all in around speakers you’d never install again all fingers and hands would be broke. After watching that cheap lazy no thought way to goop crap in bye shit installer
Bye bye
Lol
If you want to save money on the MDF @Car Audio.etc you can check out the video I recently uploaded to my channel and it will show you how you can simply reuse the factory speaker mount when you do Audi/VW speaker installs.. Nonetheless nice video and very helpful for individuals who aren't as experienced as you and I are regarding audi/car audio.. etc (pun intended) lol
You lost me when you said that you were going to use wood, MDF, no less to make a baffle. Doors get wet. Wood swells.
+Larry Martin havnt come across a single swollen mdf baffle in all my years doing it.
You need a lot of water for that to happen.
It doesn’t rain in between door panels.
yes it does. small amounts of water/moisture make its way past the window trim seal on the A4.. When I did the speakers on my A4 B7 (2007) The white colored rubber seal thats attached to the plastic vented cover on the rear side of the stock speaker housings was covered in mold, algae and moisture from water that got in past the window trim seal. Your right, it doesnt often enter the door card, but it DOES get in the door panel. Thats why the bottom of the doors on all A4s (and probably all audis) have drains on them.
You don’t need more batteries!!!! You need to make the video shorter!!! 40 minutes for this install is wayyyyyyyyyy to long, it’s longer than a damn tv show. Show be 5-10 minutes