Teardown Naim Muso

Поделиться
HTML-код
  • Опубликовано: 4 окт 2024
  • Inside Naim Muso

Комментарии • 20

  • @brolyzhou3241
    @brolyzhou3241 Год назад +1

    高級的肢解技術,大飽眼福!!! 讚

  • @zeljkogagic2551
    @zeljkogagic2551 Год назад

    Hmm i think when i dumped the muso in the box sounds better… thank for the Video 🙂

  • @cleber-omontanha2693
    @cleber-omontanha2693 Год назад

    Que qualidade de engenharia de construção 👏🏼👏🏼

  • @piotr8828
    @piotr8828 Год назад

    Seeing how you deal with this brushed aluminium and bare speakers I would give you anything to fix. 😅

  • @andrewmorris9010
    @andrewmorris9010 Год назад

    My unit won't power on at all. Tried several power leads which i know are good. Any ideas please? Thanks

    • @wormfood868
      @wormfood868 4 месяца назад +1

      I'm in the same boat; I read online that the power supply in these are a common failure point. Unfortunately these weren't really designed to be easily repairable. I'd email Naim, last I heard you'll have to pay shipping to the factory in the UK and back as well as the cost of parts to get it repaired.

  • @moacirdiasneto
    @moacirdiasneto 3 года назад

    Do you have any suggestions on how to repair tear in speaker?

    • @deltamobile5325
      @deltamobile5325  3 года назад +2

      chat me via facebook facebook.com/ngongocrang

  • @billy5052
    @billy5052 3 года назад

    Hi do you have a picture of the back of the pcb I have a blow resistor but cannot see the value

  • @romain9317
    @romain9317 3 года назад

    I didn't see clearly, is the input socket (Line in slot next to the USB port) easily accessible for a quick repair once you've opened the case ? It's loose on my device. Thank you

  • @paulk9534
    @paulk9534 Год назад

    Wow… it should be a crime to do that

  • @youyoudeyou
    @youyoudeyou 3 года назад

    Hi! Did You still remember the main output of the PSU board? Have one shutdown itself after 10minutes; considering tear down and replace a compatible PSU board…thanks

    • @deltamobile5325
      @deltamobile5325  3 года назад

      try to clean all connector jack of control pod !

    • @youyoudeyou
      @youyoudeyou 3 года назад +1

      @@deltamobile5325 many thanks for your reply, but the symptom of my unit is power on button blink and red light LED blink after a while; according to the manual seems Amplifier overload then protection; I will try to disassemble it according to your useful video instructions to try if some luck.

  • @ronedwards8239
    @ronedwards8239 3 года назад +1

    If this were a Bose Wave Radio, the haters would say $50.00 worth of parts. But give other companies a pass. Yes , this is a far better product. And it should be Wave Streaming Radio $500. Muso 2 $1,750

    • @marcoschreur3525
      @marcoschreur3525 3 года назад

      You're totaly right.

    • @genesis667
      @genesis667 3 года назад +1

      You've never owned a manufacturing corporation have you?
      The parts are just one thing that goes into the mix.
      Someone has to pay all of the employees and the retailers
      don't work for free either...

  • @madzikurbaniec5300
    @madzikurbaniec5300 Год назад

    Do U guys can help with red blinking diode?is it any way to fix it?many thanks

  • @gpobndit1136
    @gpobndit1136 4 года назад

    Is it first or 2nd generation?