Just bought one from Pyramid Air. Got the 177cal. Had it one day and fired about 250 shots. Awesome rifle. Thanks for helping me make this decision to buy it. 👍
Maybe I missed it, but did you say how you adjusted the hammer spring? I feel like if you adjusted the hammer spring after the regulator you could have gotten more shots. Also, you didn't say what pellets you were using, I'm assuming JSB Kings, 25.4gr? If so, wouldn't 830-880 fps be the "sweet spot" for JSB style pellets? I just got my avenger earlier this month. Haven't had a chance to take it out yet, also waiting for a Hajimoto Strip Stak and DonnyFL Tanto "moderator". Have some slugs on order as well.
Easy for that guy to say "your gonna need a compressor", if I'm buying a $300 PCP, take a wild guess and see if I can afford one. This guy gets his stuff free!!!
yup, i would go with some thing in the 3000psi , by hand pump. i have a Benjamin maximums .22 pcp its 2000psi to 1000psi and i get 19 good shot BUT I DO HAVE A LEAK AND WILL LEAK 3000psi to 2000psi in 3 hours not not cool to hunt with because of that but i just need to fix it
@@killer_bro_empireitsme3613 Hope you get it fixed, I finally got my Avenger .25, the first one was delivered to the wrong address. I bought a hand pump, and after I finish painting my front porch gonna pump it up-good luck .
Anyone that buys one of these really should go through them, I honestly wasn't going to take mine apart however I've already sprung a leak and it was a small shaving of brass in the seat of the poppet. Luckily the shaving didn't cause any damage to the poppet material and enabled me to explore this gun more since I've owned it. All the Chinese built airguns are very poor when it comes to quality control and at the top of the list would be assembling everything clean as a whistle. Also I might add that adjusting the regulator is the only thing I've changed from the way the gun came, I set it for 1.9K for my cast 26 grain NOE pellets, the gauge on the gun does read about 100psi low so in reality it's about 2Kpsi. It's giving me about 45fpe with groups at 50 yards in the woods at less than an inch. I never shoot on a range so a person could probably easily get 1/2" groups on a range.
I noticed that after you drained the tank you did not dry fire to empty the regulator.. Does the regulator drain as you drain the tank.. Doesn't seem like it would..
NOT FOR NOTHING BUT I NOTICED THERE'S GUYS OR SHOULD I SAY AIR GUNNERS WHO POST UP VIDEOS AND WE GIVE THEM SO MUCH SUPPORT AND YET WHEN WE ASK A QUESTION WE NEVER GET AN ANSWER AIN'T THAT WEIRD
Thanks for being clear concerning adjusting down and difficulty of hand pumping this gun. I do hand pump my Vectis and takes all my weight to do last 5-7 pumps to only hit 200 BAR. So, I’ll need to wait longer to budget in compressor. 💩! 🤣 Thanks for heads up maaan
Can i reach up to 60 FPE with my Avenger Cal. 25? Is this level of energy effective for medium games hunting? I just bought it few days ago and I don't have any idea about it.
I like the two two shooting around 900 - 950 fps and the one seven seven around 1050 to 1100 fps. Packs a wollup on your prey. With speed to push in.I never fill to 4000psi unless it's a big bore. I fill my hammer only to 4000.
I finally got mine and can get it sighted in holding in on the center target at 30 yards then on the next day I have to sight it in again because it’s off. Is this a scope thing or is this normal?
Last 5 times I’ve shot mine I had to readjust the elevation. Never bumped or dropped my rifle. The avenger .25 is my only rifle that has this issue. I’m using leupold scope rings and a UTG 4-16x44. It’s frustrating
Thank you for this video I have 25 and I'm ready to throw it away I cannot hit center it does not stay on target I have tried different settings pellets I have sent it in for repairs already after 600 rounds they said that it was a bent lever arm I'm not happy I will be looking forward to your next video also can you tell me what the hammer Spring setting was when you had it at 2100 psi I have mine at 2400 psi spring at 3 turns air arms 24.5 and they still go where they want at 55 yards thank you for your time and information
@@brorjordas1979 It was amazing when it first came in and my sringer buds loved it enough to order one but canceled their orders when problems started shooting some today we will see if it's me or the gun
Two very different guns with completely differ focus. Do you expect tinker with power settings and other adjustments?? Or, do you want just a really nice gun to target shoot and do small game hunting? If you want to tinker get the avenger. If you just want to shoot, get the HW1000. Just a note, build quality on the HW100 is vastly superior to the avenger. Cheers AGW
As far as Reg adjustment, I stated with the Reg bottomed out. Then I worked up. No de-airing required. I also wasn’t looking for a power tune. I used a 3600 fill as the Reg was set around 14-1500 psi - I have a .177. I ended up with a tune that makes 16-17 fpe for (850 fps) 100 shot (4350 fill) using crossman premier dome 10.5 grn pellets. This gun is pretty good with this tune out to 50 yds.
If you have to type a hammer for the air pressure he will make it playing or a pinging sound but probably won't hurt anything just annoying whereas if the air pressure is higher than the hammer you will lose the explosive air pressure pushing the pallet out the barrel thus losing ft/s and foot-pounds of energy
They are so very close out of the box. It comes down to esthetics and shot count. The G2 has more shots per fill but it’s longer, heavier, and has cocking bolt be lever. Again, accuracy and power are margin of error stuff with a small lead in power to the G2. But you can tune the avenger so, Manet no lead at all. Both great guns. Cheers AGW
That seems like a time wasting shit compressor 😅. My little yong heng, loads my Avenge-X from 0 to 300 bar in no time. No stops and overheating in between.
I'm a new PCP shooter and this was a very well explained topic. Thanks Rick.
Just bought one from Pyramid Air.
Got the 177cal. Had it one day and fired about 250 shots.
Awesome rifle.
Thanks for helping me make this decision to buy it. 👍
Glad you posted this! Thanks for the info.
Maybe I missed it, but did you say how you adjusted the hammer spring? I feel like if you adjusted the hammer spring after the regulator you could have gotten more shots.
Also, you didn't say what pellets you were using, I'm assuming JSB Kings, 25.4gr? If so, wouldn't 830-880 fps be the "sweet spot" for JSB style pellets? I just got my avenger earlier this month. Haven't had a chance to take it out yet, also waiting for a Hajimoto Strip Stak and DonnyFL Tanto "moderator". Have some slugs on order as well.
The only video i found that's covers all the detail plus visual. Thank you
Easy for that guy to say "your gonna need a compressor", if I'm buying a $300 PCP, take a wild guess and see if I can afford one. This guy gets his stuff free!!!
yup, i would go with some thing in the 3000psi , by hand pump. i have a Benjamin maximums .22 pcp its 2000psi to 1000psi and i get 19 good shot BUT I DO HAVE A LEAK AND WILL LEAK 3000psi to 2000psi in 3 hours not not cool to hunt with because of that but i just need to fix it
@@killer_bro_empireitsme3613 Hope you get it fixed, I finally got my Avenger .25, the first one was delivered to the wrong address. I bought a hand pump, and after I finish painting my front porch gonna pump it up-good luck .
Anyone that buys one of these really should go through them, I honestly wasn't going to take mine apart however I've already sprung a leak and it was a small shaving of brass in the seat of the poppet. Luckily the shaving didn't cause any damage to the poppet material and enabled me to explore this gun more since I've owned it. All the Chinese built airguns are very poor when it comes to quality control and at the top of the list would be assembling everything clean as a whistle.
Also I might add that adjusting the regulator is the only thing I've changed from the way the gun came, I set it for 1.9K for my cast 26 grain NOE pellets, the gauge on the gun does read about 100psi low so in reality it's about 2Kpsi. It's giving me about 45fpe with groups at 50 yards in the woods at less than an inch. I never shoot on a range so a person could probably easily get 1/2" groups on a range.
Love the hard work you put into this part of the shooting hobby Rick! I've learned a lot from you and your advice has helped my buying choices.
you really did a great job on this video rick. well done sir.
What adjustment did you have on the hammer spring?
I noticed that after you drained the tank you did not dry fire to empty the regulator.. Does the regulator drain as you drain the tank.. Doesn't seem like it would..
NOT FOR NOTHING BUT I NOTICED THERE'S GUYS OR SHOULD I SAY AIR GUNNERS WHO POST UP VIDEOS AND WE GIVE THEM SO MUCH SUPPORT AND YET WHEN WE ASK A QUESTION WE NEVER GET AN ANSWER AIN'T THAT WEIRD
Thanks for being clear concerning adjusting down and difficulty of hand pumping this gun. I do hand pump my Vectis and takes all my weight to do last 5-7 pumps to only hit 200 BAR. So, I’ll need to wait longer to budget in compressor. 💩! 🤣 Thanks for heads up maaan
It doesn't get better than this clear as water thank you
Good video thanks getting 👍 one this week Good info
Hill mk5 hand pump does a pretty good job filling this gun up. i fill to 4300 psi from 1800psi and it’s probably 50 pumps and its not super hard
50 pumps. Is it seriously only 50 pumps for you from 1800 to 4300. Ive heard an average of 100 pumps per 1000 psi. I may need to buy the mk5 pump!
Very informative 👍
Those guns come with clips my dude ;-) thanks for the info. I think I’ll just reset my reg at 21 without the Chrono and call it a day.
GREAT STUFF!!!! THANK YOU!!!!!!
Awesome video thanks!
I'm ready for another origin review
The closed captions interpretation of your accent is "Arrogant Web TV"
😆
Can i reach up to 60 FPE with my Avenger Cal. 25? Is this level of energy effective for medium games hunting?
I just bought it few days ago and I don't have any idea about it.
I like the two two shooting around 900 - 950 fps and the one seven seven around 1050 to 1100 fps. Packs a wollup on your prey. With speed to push in.I never fill to 4000psi unless it's a big bore. I fill my hammer only to 4000.
Getting a .177.. what are your settings to get that 1050? How full do you charge and how many of those shots do you get.
Hello, with a .25 caliber (JSB Exact king heavy 2,20 grammes or 22,35 grains), if I want to shoot at 100 meter, which is the better set up ?
Did you leave the hammer spring factory? Tia.
something is wrong with my avenger. it is not shooting on target. i changed the o rings on the bolt but that did not help.
Shoot closer to see where things are, adjust from there
What about hammer spring?
I finally got mine and can get it sighted in holding in on the center target at 30 yards then on the next day I have to sight it in again because it’s off. Is this a scope thing or is this normal?
Mine .25 caliber dose it every time it sucks. One of the first post is mine
Last 5 times I’ve shot mine I had to readjust the elevation. Never bumped or dropped my rifle. The avenger .25 is my only rifle that has this issue. I’m using leupold scope rings and a UTG 4-16x44. It’s frustrating
Might be regulater creep,, check your air pressure before you take the first shot, and or dry fire it a few times..
Thank you for this video I have 25 and I'm ready to throw it away I cannot hit center it does not stay on target I have tried different settings pellets I have sent it in for repairs already after 600 rounds they said that it was a bent lever arm I'm not happy I will be looking forward to your next video also can you tell me what the hammer Spring setting was when you had it at 2100 psi I have mine at 2400 psi spring at 3 turns air arms 24.5 and they still go where they want at 55 yards thank you for your time and information
Manuel Silva my rifle does the same thing. Who did you send it off to? Back to pyramid air?
Ouch! I was already hoping this rifle to be the one.. but apparently it mqy give some issues due to affordability..
@@nolimitracing9752 air Venturi under warranty
@@brorjordas1979 It was amazing when it first came in and my sringer buds loved it enough to order one but canceled their orders when problems started shooting some today we will see if it's me or the gun
Springer buds
Why didn't you use a hammer spring adjustment on that 2100 PSI tune?
Yes the gun made a horrible twang noise I'm shocked Rick didn't notice it
Hello! Do you think the Avenger is as good as Weihrauch's HW100? I'm hesitating between these two guns.
Two very different guns with completely differ focus. Do you expect tinker with power settings and other adjustments?? Or, do you want just a really nice gun to target shoot and do small game hunting?
If you want to tinker get the avenger. If you just want to shoot, get the HW1000.
Just a note, build quality on the HW100 is vastly superior to the avenger.
Cheers
AGW
As far as Reg adjustment, I stated with the Reg bottomed out. Then I worked up. No de-airing required. I also wasn’t looking for a power tune. I used a 3600 fill as the Reg was set around 14-1500 psi - I have a .177. I ended up with a tune that makes 16-17 fpe for (850 fps) 100 shot (4350 fill) using crossman premier dome 10.5 grn pellets. This gun is pretty good with this tune out to 50 yds.
What was the weight of pallet you were shooting
Can I use a regular air compressor and regulate the pressure or do I have to use a special compressor..??
A regular air compressor can do about 125 psi. HPA IS 350 TIMES MORE! 4350 PSI
What does having too much hammer spring or too little hammer spring do? Sorry for the naive question. Thanks
If you have to type a hammer for the air pressure he will make it playing or a pinging sound but probably won't hurt anything just annoying whereas if the air pressure is higher than the hammer you will lose the explosive air pressure pushing the pallet out the barrel thus losing ft/s and foot-pounds of energy
Weird my name is also Kevin Frederick, what are the chances of that???
What's grains pellets
Did your Avenger have regulator creep?
Mine sure does!
For accuracy and power avenger or gauntlet 2 both in .25cal
They are so very close out of the box. It comes down to esthetics and shot count. The G2 has more shots per fill but it’s longer, heavier, and has cocking bolt be lever. Again, accuracy and power are margin of error stuff with a small lead in power to the G2. But you can tune the avenger so, Manet no lead at all. Both great guns.
Cheers
AGW
Hey Rick, is it feasible to fill this gun with my Air Venturi Nomad I? it takes a little while to fill to 200 bar.
You might as well ask the Man in the Moon, this guy won't answer.
@@bucsam1660 good to know
Yes, I fill my Avenger with my Nomad 2 without any problems.
Please try air Venturi Avenger.177 accurate shooting review
Is that Marauder on the wall “old news” next to this one? Which would you lean towards in .25?
Hello can you review the Benjamin kratos!
Why I see people leaning,holding and lifting their rifles by the scopes? It don’t make sense
What is the factory fps of .177 Aventuri Avenger?
Crazy it can't fill that without cool down, but this is an old video
Can you take the tank off to go down on the reg....
Please, if possible, do. 177 version setting.
i would lock to see this in a bull pup
That seems like a time wasting shit compressor 😅. My little yong heng, loads my Avenge-X from 0 to 300 bar in no time. No stops and overheating in between.
Tell your sister to stop being camera shy
like not lock sorry