this could be used on ETCMC new upcoming pools for ETC that will reward you in ETC and ETCPOW, a native token on ETC blockchain that usually you'll get from running ETC nodes or minting NFTs in the ETCMC DAO
I guess the very intro to your vid explains the issue I had last night with my X4-3UZ I just got... Thank for the Jingle Mining hookup... I put it on ezil and instead of 850mhs overnight it did like 250 and had just restarted when I logged in from work. I forgot it doesn't do zil. So I put it back on unmineable. 880mhs all day!! I can't wait to see their new miners they say they have coming. Btc and scrypt. Ought to be mega efficient!
@@TheMiningCabinet I use it to solo mine ETC. I get an average of 970mhs @ 390Watts, what do you get? Also, when I try to overclock to 225MHz, my hashrate doesn't increase, so leave it at 200. Does 225MHz work for you?
Jasminer engineers reported after testing that dual mining Zil on the X4 series will shorten the life span of the ASIC chips, so they will never enable dual mining on the X4
Very nice unit! What Octaspace wallet do you use? With the low dag size, my 4gb ipollos could mine it when etc passes the dag size...(maybe not since its ETH, not ETC algo)
Awesome video!!!! I’m still waiting on my 2 to come in from my May 1st order. (I did use your code at the time). Cryptominer bros sent me an email yesterday about delays and think it’ll be august 15th-30th now. Depending on how the miners do, I might try and get a couple more to finish off my excess solar. Although I would like to diversify a bit.
You're welcome anytime to mine with that bad boy on my ETC mining pool 🔥🚀 Expecting delivery "OCTOBER 2023" LMAO 🤡 I'm OUT lol Happy midweek my brother Rabid 🙏🏽💪🏽
@@RabidMining I like those miners the only big no for me is the 5GB ram on their budget model X4-Q. and I am not paying 3 grands for the 8GB model. i will stick to kaspa, just ordered two KS0 lol
Get work typically used for wallet solo mining. Stratum is for pools. Curious if itll support stratum v2. Maybe v1 is all that’s necessary. Thanks for the great info!
Thanks for the thorough review of the new X16-Q. I'm considering purchasing one for the apartment but would like to know about the heat produced. When you break down the hash rate on your next vid can you add how much heat during the 3 mining modes? (or did I miss it in this video). Thanks man.
@@RabidMining LOL, good to know. Living in Texas where it was 106 degrees F today has added heat production to cost, wattage and hashrate as concerns when deciding on a new miner. : )
Iceriver ks1 should buy or not pls tell me sir recent days difficulty will be increase grastically so that's why I'm asking soon ks3jumbo also coming what I do pls pls help
Pumped For The New Jasminers? Cheaper shipping Email Victoria say Rabid Sent You: victoria@jinglemining.com
Can you mount the rack hands on the air exhaust side?
True story
@CryptoOutlaw I hope Elon is just waiting for the bullrun to announce doge
Guess we will see
Damn how did you get one? You are blessed by the gods
1000 Days for ROI....crazy! Just buy BTC and sit on it
this could be used on ETCMC new upcoming pools for ETC that will reward you in ETC and ETCPOW, a native token on ETC blockchain that usually you'll get from running ETC nodes or minting NFTs in the ETCMC DAO
interesting!!!
Wow that thing is frekin awesome! Congrats Rabid!!!
Ya it is
Really good review Rabid. Fantastic you was able to get one. I got my eye on one, but waiting for the price to go down
Thank you
I guess the very intro to your vid explains the issue I had last night with my X4-3UZ I just got... Thank for the Jingle Mining hookup... I put it on ezil and instead of 850mhs overnight it did like 250 and had just restarted when I logged in from work. I forgot it doesn't do zil. So I put it back on unmineable. 880mhs all day!! I can't wait to see their new miners they say they have coming. Btc and scrypt. Ought to be mega efficient!
I got the same one X4-QZ, and I just love how quiet it is. I have it hashing away in the living room and you'd never know its there
@@N1NJAKIDD what do you have it on. I've had mine on unmineable. With kaspa running wild I just moved it from XRP to Kas. Even with a KS0 running.
@@TheMiningCabinet I use it to solo mine ETC. I get an average of 970mhs @ 390Watts, what do you get? Also, when I try to overclock to 225MHz, my hashrate doesn't increase, so leave it at 200. Does 225MHz work for you?
@@N1NJAKIDD I haven't hooked my killawatt meter to it yet. I have it on 225mhz but need to put it on 200mhz and see if there's any difference.
Glad X16-Qs are being delayed 😋.. Not looking forward to seeing a massive spike in hashrate
Need them to update the X4-Q to support Zil dual mining with ETC 😞
Ya wonder what would happen with x16 firmware in the x4 lol
Just contacted my link and they said it’s not going to happen for the X4 because of hardware, NO DUAL MINING NOR NICEHASH.😢
Jasminer engineers reported after testing that dual mining Zil on the X4 series will shorten the life span of the ASIC chips, so they will never enable dual mining on the X4
Very nice unit!
What Octaspace wallet do you use? With the low dag size, my 4gb ipollos could mine it when etc passes the dag size...(maybe not since its ETH, not ETC algo)
Just using metamask until the tangem hardware wallet has support sometime this month bit.ly/40MMp2v code "RABID" 10% off
Awesome video!!!! I’m still waiting on my 2 to come in from my May 1st order. (I did use your code at the time). Cryptominer bros sent me an email yesterday about delays and think it’ll be august 15th-30th now. Depending on how the miners do, I might try and get a couple more to finish off my excess solar. Although I would like to diversify a bit.
Awesome ya will see how the full tests turn out.
Nicehash support is the key for me. Looking forward to the review of that.
So jelly! I have 8 of these on order. But they keep making me wait!
dam 8!!!! crazy but it is awesome
at their website - "Expected delivery date: [October 2023]"
@@bodyguardik That is if you order today. I ordered mine back in May 2023
@@RabidMining Yeah did that back in May before I found realized the Kaspa miner were the real deal :P
Damn you guys have so much cash $$$
You're welcome anytime to mine with that bad boy on my ETC mining pool 🔥🚀
Expecting delivery "OCTOBER 2023" LMAO 🤡 I'm OUT lol
Happy midweek my brother Rabid 🙏🏽💪🏽
Thanks Rabid Great review, how much heat does this badboy produce compared to a s19j
Nothing in comparison lol bit warm but nothing like a btc space heater
@@RabidMining I like those miners the only big no for me is the 5GB ram on their budget model X4-Q. and I am not paying 3 grands for the 8GB model. i will stick to kaspa, just ordered two KS0 lol
Get work typically used for wallet solo mining. Stratum is for pools. Curious if itll support stratum v2. Maybe v1 is all that’s necessary. Thanks for the great info!
Thanks for the info!
Thanks for the info!
Thanks for the thorough review of the new X16-Q. I'm considering purchasing one for the apartment but would like to know about the heat produced. When you break down the hash rate on your next vid can you add how much heat during the 3 mining modes? (or did I miss it in this video). Thanks man.
Sure feeling the back is a bit but nothing like a bitmain space heater lol
@@RabidMining LOL, good to know. Living in Texas where it was 106 degrees F today has added heat production to cost, wattage and hashrate as concerns when deciding on a new miner. : )
Gotcha ya it's nothing compared to standard asics
Iceriver ks1 should buy or not pls tell me sir recent days difficulty will be increase grastically so that's why I'm asking soon ks3jumbo also coming what I do pls pls help
Sir no reply
Up to you can't tell you what to buy lol it should roi in a few months but depends how many miners bitmain deploys next month.
@RabidMining What hashrate are you getting on Zil?
Am waiting on mine to arrive😬
Should be in the next couple weeks
Hey, so where are my minors at? I ordered some wear my Minars
Should be shipping around the 20th
You're giving us your IP in the video, with recently logged in as in the K1pool dashboard
great video today
Glad you enjoyed it
How is the Jasminer X16 running on Nicehash now after you said it sucks on Nicehash?
Still sucks no updates for NH yet
I did the math, on etc around 50 bucks a month for me 🤔 a lot to throw down for that kind of return.
Been around 20h online now at $6.50 before power with all the reboots and pool swaps will see what the next full 24h looks like
Real world always different, but I usually hold anyway. Sitting on etc from 2016 🤪
Thank you ❤
You're welcome 😊
can it mine on 120v power?
Yes testing was on 120v
"Expected delivery date: [October 2023]" - no, thank you
Ya that's for current backorder first few batchs are shipping by the 20th
Can the JasminerX16-Q mine Rethereum on the EthashB3 algorithm?
Nope not yet anyway
i can't wait
Put it on K1 Pool for OCTA + PAC + ZIL and triple mine my friend. $$$
Crazy will have pac soon but currently it's worthless so will see
When did you order this
In monero or reptorium mining, if i use 4gb 2 stick ram, does it affect in cpu mining comparing to 8gb 2stick ram? plz help me out.
No but for RTM only need 1 stick saves power
how about geth pool to mine octa+zil?
It's pretty good
Yeah right, these are never shipping. lol
Aug 20th for all pre orders October for current orders