Do a rubber band mod under the body at the release slider. Basicly wrap a rubber band around the slider and the ends on the roll cage. This helps to hold te body on because of the resistance ln the slider
Thats the problem so many channels only focus on breaking stuff by seeing how high they can throw stuff off a ramp and that is the only measurement to them how a rc car is. Most people actually drive their cars they are not out to break stuff but people like watching you spend money to buy parts by breaking stuff. Anyways it looks like a solid rc it is 250 on bangood and the cheapest is like 170 on Ali which makes me worry why the disparity in pricing I really dont trust Ali. When these were 100 - 150 it was a god deal now they are increasing the price a lot for 10th scale and smaller I dont see the value at that point but that is my opinion
@@L2theWcarscoffeelife opinions vary I drive these cars the way I do for pure enjoyment. Some i drive conservatively others I roll on that full trigger and just let it eat and care Nothing about nothing as sometimes that's what it's about. If you choose to jump over a house then you should also choose which bank account is going to pay in the event you cause breakage. I'll tell you right now many many times have I sidestepped that clutch with that accelerator being pushed so hard that there's an imprint in the rug on both the TA and my Camaro and even more so the TA that you don't know about and that was for pure driving excitement. Some people do things that cause an adrenaline rush to combat the BS that they have to deal with living on this planet.
@@rcguygarage thats why we enjoy your content you are a driver that actually runs a rc and shows it actually driving and what it can do jumping in different environments like what I try to do I use my kc rc ramp and I enjoy it and people can see how a rc jumps but some channels are just about pure carnage, My Cruze has a dent in the floor trying to get the little turbo to spool up lol I have that need for speed to 91 Z28 built 350. 2017 Camaro SS 50th edition with a Procharger, 2015 Chevy SS. and my 2005 Pontiac GTO Which the SS and GTO are Holdens from Australia low production they will keep their value It would be nice to see your cars once all I have seen is a glimpse of the Yenko and the Jag and I am sure not very many even know what a Yenko is lol
Nice to see you loving this thing!! I have seen a youtuber "moding" the suspension for more travel, he added larger shocks which the truck might need to handle those jumps better, it took a beating like it was nothing. Parts wise, aliexpress might be the source once the truck is available online.
I watch you a lot guy and I know you love this thing cause you've been rippn this guy almost everyday lately! I'm waiting on the V2 but in the meantime my other 3 MJXs keep me smiling plenty. I'm also diggn on the HBX 1/10 truck I've got. I put the stock tires off my Terminator on it with some upgraded shocks and it's a ripper too!
@@Fast_Lane_RC it's really a very surprising RC for what you get. It makes you really start to rethink things and also wonder why the big box brands are holding back while the China junks are forking it over
Think its a great truck for beginners who want an RTR, but I wonder what upgrades you can do to it once you get bored of stock.. thats the principle of this hobby guy
@@jstud428 well in the past with automotive upgrades for a Chevy chevette weren't really a thing but then as time goes on now you can have a Chevy chevette with a 502 shoe horned in it but I do have to say part support with vehicles like this sucks
Respect for breaking your old ways of thinking about “china junk rc’s” and producing a great in depth analysis of this MJX. Check out the Rlaarlo Omni terminator if you want another Chinese junk banger. Thanks for the awesome content 👍✌🏼
It's not really a breakaway from my thinking. It is just a realization that these companies are definitely making it harder, but the thing that still remains is part support and that is where more long-standing companies have that backing
@@curbscrape8343 there's one in my cart on AE around 160USD plus shipping, even cheaper than the one I've ordered, hopefully mine is not cancelled also 😅
@peteyusof4425 mine was with JJRC Toy Store - might just re-order with the choice deals are on. Was thinking alternatively get a rival mt10 but that way over double the cost. Might just re-order it. Good luck getting yours.
@@rcguygarage oh heck yeah!! That's a phenomenal truck. Had one in the mid 2000's with a Triton V8 and added a full Sperchip and Power Commander along with a turbo on the exhaust with the ability to decide what gears it cued up with with switches in my center console. Over 500hp and 650ft.lb. torque. Thing could pass anything except a gas station. 😂
That first jump is mint! The Gold Metal! That's what stock is all about. If it ain't broken don't fix it. Mint video!
Do a rubber band mod under the body at the release slider. Basicly wrap a rubber band around the slider and the ends on the roll cage. This helps to hold te body on because of the resistance ln the slider
Thats the problem so many channels only focus on breaking stuff by seeing how high they can throw stuff off a ramp and that is the only measurement to them how a rc car is. Most people actually drive their cars they are not out to break stuff but people like watching you spend money to buy parts by breaking stuff. Anyways it looks like a solid rc it is 250 on bangood and the cheapest is like 170 on Ali which makes me worry why the disparity in pricing I really dont trust Ali. When these were 100 - 150 it was a god deal now they are increasing the price a lot for 10th scale and smaller I dont see the value at that point but that is my opinion
@@L2theWcarscoffeelife opinions vary
I drive these cars the way I do for pure enjoyment. Some i drive conservatively others I roll on that full trigger and just let it eat and care Nothing about nothing as sometimes that's what it's about. If you choose to jump over a house then you should also choose which bank account is going to pay in the event you cause breakage. I'll tell you right now many many times have I sidestepped that clutch with that accelerator being pushed so hard that there's an imprint in the rug on both the TA and my Camaro and even more so the TA that you don't know about and that was for pure driving excitement. Some people do things that cause an adrenaline rush to combat the BS that they have to deal with living on this planet.
@@rcguygarage thats why we enjoy your content you are a driver that actually runs a rc and shows it actually driving and what it can do jumping in different environments like what I try to do I use my kc rc ramp and I enjoy it and people can see how a rc jumps but some channels are just about pure carnage, My Cruze has a dent in the floor trying to get the little turbo to spool up lol I have that need for speed to 91 Z28 built 350. 2017 Camaro SS 50th edition with a Procharger, 2015 Chevy SS. and my 2005 Pontiac GTO Which the SS and GTO are Holdens from Australia low production they will keep their value It would be nice to see your cars once all I have seen is a glimpse of the Yenko and the Jag and I am sure not very many even know what a Yenko is lol
I'm a Losi fan for the last 3 decades but I just ordered a MJX H8H 1/8th and can't wait to have it here!
I gotta say you did a great job of getting all of those rock out the track. And that looks like a solid rig.
Nice to see you loving this thing!! I have seen a youtuber "moding" the suspension for more travel, he added larger shocks which the truck might need to handle those jumps better, it took a beating like it was nothing.
Parts wise, aliexpress might be the source once the truck is available online.
What a tank! Great video guy! The back yahd track is dialed!
I watch you a lot guy and I know you love this thing cause you've been rippn this guy almost everyday lately! I'm waiting on the V2 but in the meantime my other 3 MJXs keep me smiling plenty. I'm also diggn on the HBX 1/10 truck I've got. I put the stock tires off my Terminator on it with some upgraded shocks and it's a ripper too!
Hi Guy nice jumps you make that china junk look top of the line, good job,allways fun to watch thanks for that.
@@Fast_Lane_RC it's really a very surprising RC for what you get. It makes you really start to rethink things and also wonder why the big box brands are holding back while the China junks are forking it over
@@rcguygarage completely agreed, the big box have to step up the game if they want to keep the value cause its becoming hard to see.
❤ Really great video and The Car looking good 😊 Bash On😊
Think its a great truck for beginners who want an RTR, but I wonder what upgrades you can do to it once you get bored of stock.. thats the principle of this hobby guy
@@jstud428 well in the past with automotive upgrades for a Chevy chevette weren't really a thing but then as time goes on now you can have a Chevy chevette with a 502 shoe horned in it but I do have to say part support with vehicles like this sucks
Front flips are tougher then I thought as well it twist up in the air 🙃
Respect for breaking your old ways of thinking about “china junk rc’s” and producing a great in depth analysis of this MJX. Check out the Rlaarlo Omni terminator if you want another Chinese junk banger. Thanks for the awesome content 👍✌🏼
It's not really a breakaway from my thinking. It is just a realization that these companies are definitely making it harder, but the thing that still remains is part support and that is where more long-standing companies have that backing
Damn it - I just realised RC Guy is like a chunky Kurt Russell!
@@curbscrape8343 YES and you ain't kidding about the chunky stuff. Jesus guy has it packed on
Great slow motion action! 😂
Traxxas body off 😮
@@earlmoorhead5555 YES you know the deal👍💯
Wow bro… what a rippah’ and now it’s time to order parts and all the fun stuff😳… should be interesting
@@RC-Closer1313 The parts ordering process just went to a whole new level 🤣😂🤣😂
Even with the stock tires, that thing has nice air control.
Ya, the rocks! 😅
Nice Bash session 🔥👍🏽💯💪🏽
Awesome bash, still waiting for mine to arrive 😑
Just had mine cancelled by the store on AE Damn.
@@curbscrape8343 there's one in my cart on AE around 160USD plus shipping, even cheaper than the one I've ordered, hopefully mine is not cancelled also 😅
@peteyusof4425 mine was with JJRC Toy Store - might just re-order with the choice deals are on.
Was thinking alternatively get a rival mt10 but that way over double the cost.
Might just re-order it. Good luck getting yours.
@@curbscrape8343 thanks mate, hopefully you'll get yours too.
Thanks!
Nice step up...
Truck is 100%
Convinced better than an Arrma 4s truck
Definitely not in the same classification
Intermediate axis theorem is why it flips weird.
Somebody needs to put this against the MT10 v2
Lol it just don't care, rippa
It really is until it isn't and then you do care because it is such a easy care Nothing about nothing. Rip
hi, a new version, V2, soon ?
@@jiji0496 China market yes USA market this is what you get. Posted a community post with info
@@rcguygarage it's a good ...beginning !! ;)
Hey buddy.... where you at with that Fisker? Heard you can pick one up for $10k now. 😃
Jump on that!! ❤
There's a saying that ship is sailed. My eyes are set on a slick F-350 right now
@@rcguygarage oh heck yeah!!
That's a phenomenal truck. Had one in the mid 2000's with a Triton V8 and added a full Sperchip and Power Commander along with a turbo on the exhaust with the ability to decide what gears it cued up with with switches in my center console.
Over 500hp and 650ft.lb. torque. Thing could pass anything except a gas station. 😂
Time for an Insta360???
@@johngoodwin4353 that may be a possibility
For 170usd its nuts 🤙
Where did you got that price? i think its 250USD.
Yeah I think I've seen it on AliExpress or something like that. Obviously there's shipping to consider
Bagaimana penilaianmu tentang produk itu? Apakah worth it?