A cheap way to heat a barn! - Barrel Stove and Chimney Pipe

Поделиться
HTML-код
  • Опубликовано: 14 окт 2024
  • Barrel Stove Kit: amzn.to/3gdFzgO
    Chimney Pipe - Stainless: amzn.to/3Ao32WT
    Chimney Pipe - Galvanized: amzn.to/3Xas8SU
    Stove Pipe - Double Wall: amzn.to/3GnECR6
    Through Wall Kit - amzn.to/3TLqkNj
    Various (other) Pipe and Connections: amzn.to/3UMyiXA - Look here if what you need isn't above.
    Visit our Amazon Affiliate Store: www.amazon.com.... This storefront provides links to many of the products we use around the farm.
    This video demonstrates how to build a barrel stove and install it in a barn. Depending upon your setup, the pipe can be the most expensive part of the install.
    Disclaimer: We participate in affiliate marketing programs and we may receive a small commission for any purchases made through the above links. There is no upcharge to you for this service. We appreciate your support!

Комментарии • 115

  • @PainterD54
    @PainterD54 10 месяцев назад +1

    To make mine burn more efficient, I welded a piece of 3/16" steel plate across inside of the barrel about 3" from the top starting against the back wall by the pipe to about 6" from the front. Then I ran a piece of 1" water pipe inside just under that steel plate with 1/4" holes drilled all along the bottom of it about 1/2" apart. Now the flame has to travel all the way to the front of the stove, then over the plate to the back of the stove before it exits out. The pipe is screwed into the smaller nipple (already in any 55 gallon barrel) which was already just above the door, so the air went into the pipe and lit the smoke on fire (a secondary burn) I have a small window in my door (I put that in when I made the door) so I can actually see the smoke burn before it goes over the steel plate and out the back. I have little to no smoke coming out the smoke stack now.

  • @markburton9712
    @markburton9712 10 месяцев назад +1

    Cracking video mate. England is now as cold as my last relationship. God bless.

    • @IndyFarmLife
      @IndyFarmLife  10 месяцев назад

      hahahah, that one had me rolling!

  • @ahdam82
    @ahdam82 Год назад +2

    Thanks for making this video you explained everything perfectly not many videos out there like this one. It’s crazy our price is literally doubled on everything from four years ago when you made this video. Keep up the great work

    • @IndyFarmLife
      @IndyFarmLife  Год назад +1

      Thanks Adam! Yea, it's crazy what the price of this stuff (and everything) has risen to over the past couple years. Glad it was helpful! Hope to see you around the channel!

  • @terryheller6510
    @terryheller6510 3 года назад +3

    Nice to see someone build and install a barrel stove AND consider and follow clearances to combustibles! I'm pretty sure half of the barrel stove installs I've seen on here resulted in a fire.

  • @erllanos
    @erllanos 4 года назад +14

    “Don’t use plastic, that stuff melts.” 😂😂😂

    • @ryanscott2548
      @ryanscott2548 3 года назад

      I used plastic, it was fine but I used high heat paint

    • @ryanscott2548
      @ryanscott2548 3 года назад

      @@IndyFarmLife haha obviously a plastic barrel would start to melt with just a candle inside

    • @holly-jothompson3717
      @holly-jothompson3717 Год назад

      Whattt noo way shirley u cant be serious lmao

  • @smjmike781
    @smjmike781 4 года назад +16

    I filled the bottom of mine with rock (gravel) and I've burned it for 11 years and all is good. I wouldn't waste my money on firebrick on the inside. Like you mentioned, barrels are cheap, if it burns out I will simply replace it.

    • @We_are_the_light
      @We_are_the_light 4 года назад +1

      Sand works great

    • @rudygeorgiamulesandcountry1594
      @rudygeorgiamulesandcountry1594 3 года назад +3

      Actually ...
      ... the Fire brick is an excellent idea, it may not seem necessary unless you've tried it.
      Barrels might be cheap, but ... my time involved in building another stove isn't.
      Anyway ... IF you build your barrel stove as airtight as possible , to limit fire size/temp and prolong burn time you will NEVER burn a drum out. Constanntly running a rip roaring fire, either; intentionally or because of air leaks is what will eventually burn a drum through.
      I put fireproof rope gasketing between the door and drum and do N0T cut out for the airvents in the door.
      The large bung provides enough draft. Just create a pivoting disc control for that.. A half moon 1/4 inch wide should be enough air to maintain 350° stack temperature. You may want an extension of pipe threaded into the large bung.

    • @tomortale2333
      @tomortale2333 2 года назад

      BUT IF INSIDE IS ROCK GRAVEL...HOW U GONNA CLEAN OUT THE ASHES?

  • @BillLowenburg
    @BillLowenburg 3 года назад +5

    Nice install and good explanation. I used cement board around mine, and then a friend gave me a pile of slate from a roof he tore off an old farmhouse porch. I used Thinset to mount the slates onto the cement board, kind of staggered them in a grid and man it looks great. Completely fireproof, too. I used a dark grout in between the slates - every one is different and it has a real antique look. Regarding pipe, just for laughs I called up a high-end stove installer located south of me in Bucks County, PA. Sent them pictures of my barn, etc. They emailed me that it would cost "at least 10 grand to do it right " (as in $10,000), but of course they'd first have to come and do a "site evaluation," which would cost $199, just for looking. I politely told them I'd get back to them. Thanks for your video, it was instructive and confirmed a lot of things I've learned on my own, some of them the hard way - but it's all for fun in my case, so I try to keep a sense of humor about everything. Keep up the good work.

  • @jasonlarsen5739
    @jasonlarsen5739 4 года назад +2

    I added a 2" ball valve onto the 2" threaded hole and used black pipe to pipe in outside air for 100% outdoor air combustion..also can eliminate the pipe damper by going this the inlet valve is the damper...should work easily in this installation and it will help to save heat.

  • @doneown503
    @doneown503 Год назад +1

    I have not used mine , till I buy the grate
    , installing the rear legs was a pain due to trouble getting access to hold the tool on the nuts inside the drum.

    • @IndyFarmLife
      @IndyFarmLife  Год назад

      Yes, getting someone to help hold your nuts is key!😆

  • @DavidSanchez-uo2cn
    @DavidSanchez-uo2cn Год назад +1

    Perfect installation will pass code inspection.....I'm sure you figured it out by now it's best to keep the baffle lid at a 45 degree angle and not fully open once you have the fire started!

    • @IndyFarmLife
      @IndyFarmLife  Год назад +1

      Thank you! Yes, this thing really cooks if you give it a lot of airflow!

  • @hilltopmachineworks2131
    @hilltopmachineworks2131 4 года назад +2

    Good info thanks. Currently erecting a 40x60 shop. Going to do a double barrel stove set up for a heat source. As you mentioned a lot of info on the barrel conversions but not much on the actual piping of the smoke.

  • @scottwilson9817
    @scottwilson9817 Год назад +1

    It works got one in my building

  • @752brickie
    @752brickie 3 года назад

    I used to have one in my basement ! they are an amazing heater !!! We used the Sotz doors etc. They used to make an excellent barrel stove kit ! It was a lot tighter than the ones they make today ! I only used the single barrel but the double barrel stoves were really the heaters.

    • @752brickie
      @752brickie 3 года назад

      @@IndyFarmLife I believe the one state park near hear had a double barrel in their one shop. I did a lot of chimney lining etc for them . They had some barrel stoves in different places. They are amazing heaters and they really last a long time.

  • @huder67
    @huder67 4 года назад +1

    Great video, wanted to add a few things. When running the pipe horizontally the clearances above the pipe, in my experience, are a bit further. Also worth mentioning, because I've seen it done many times, it's a bad idea to stuff insulation, even though it might be non combustible, against the the pipe where in passes thought a wall, ceiling, or roof. The idea is that the heat can build up to dangerous levels due to the insulation.

  • @ryanhampton621
    @ryanhampton621 5 лет назад +7

    Im going to need the recipe for that Italian beef lol

  • @joelalleman9591
    @joelalleman9591 3 года назад

    you can also stack concrete block around the stove or concrete board as a heat barrier

  • @a32_magoo51
    @a32_magoo51 3 года назад +2

    Nothing more satisfying then seeing a huge china stamp on a wood stove lol.

    • @countryfriedent
      @countryfriedent 3 года назад +3

      Maybe usa producers should step their game up then, not everyone is rich here.

  • @dadandlokiinthewoods8806
    @dadandlokiinthewoods8806 4 года назад

    Very nice. My dad had one in our garage when I was young. Heat is great from them.

  • @paulrevere4326
    @paulrevere4326 3 года назад

    Now show how to clean the ashes out of it. What type shovel do you use? Great video!

  • @hotmoon226
    @hotmoon226 3 года назад +1

    My garage needs one 😁

    • @bigpappahemi4263
      @bigpappahemi4263 3 года назад

      mine too

    • @keithgoodman7966
      @keithgoodman7966 3 года назад

      Just put one in mine. Should have done it years ago.

    • @keithgoodman7966
      @keithgoodman7966 3 года назад

      @@IndyFarmLife sounds good man. I put a layer of sand down then fire brick to try to prevent premature wear on the can.

    • @keithgoodman7966
      @keithgoodman7966 3 года назад

      @@IndyFarmLife flame on!

  • @ciphercode2298
    @ciphercode2298 3 года назад +1

    Built one about 10 years ago for our patio. I lined the inside with patio paver bricks that were less tha .50$ each. And the barrel and bricks are still in good shape. Its unpainted and uncovered outside. All I do is cover the flu when we're not using it with a coffee can.

    • @IndyFarmLife
      @IndyFarmLife  3 года назад

      What part of the country are you in? That's impressive that it hasn't rusted through anywhere.

    • @ciphercode2298
      @ciphercode2298 3 года назад +1

      @@IndyFarmLife southern West Virginia. I do need to drill out a broken door hinge pin on it that's broken,but other than that it's still fine.

    • @IndyFarmLife
      @IndyFarmLife  3 года назад

      @@ciphercode2298 That's impressive. I'm starting to think you used a plastic barrel! haha

    • @ciphercode2298
      @ciphercode2298 3 года назад +1

      @@IndyFarmLife lol,nah just plain steel. I think I paid d $20 for it out of the trading journal.

    • @IndyFarmLife
      @IndyFarmLife  3 года назад +1

      @@ciphercode2298 In that case, this falls into the category of "they just don't make it like they used to" :)

  • @mobiletech6289
    @mobiletech6289 5 лет назад

    Nice job , good install , like the heat shields and explanation

  • @indymx6
    @indymx6 3 года назад

    One more thing for my list of must haves lol

    • @indymx6
      @indymx6 3 года назад

      @@IndyFarmLife yeah that's bad ass for sure.

  • @dominickh3367
    @dominickh3367 3 года назад +4

    Is there a code about how tall the non-combustible wall has to be from the height of the barrel stove?

  • @charlielaugharne3190
    @charlielaugharne3190 3 года назад

    I like your style ,

    • @charlielaugharne3190
      @charlielaugharne3190 3 года назад

      @@IndyFarmLife Don't be to harsh on yourself.. haha. I enjoy the content and manner in which you do things .
      I'm recovering from a nasty accident. Three pelvic fractures and a few smashed vertebrae along with some interesting internal crush injuries.
      So RUclips has been my saving grace. And you Sir, Your style and approach really appeals to me . I thank you for that .
      Many try and fail , but you are a inspiration. While I'm slowly mending I need a decent hobby to keep me sane .
      I'm currently having a workshop/studio being built for me . That will include a Multifuel wood burner .
      You ticked a lot of boxes for me .
      I just need a hobby that I can pick up and put down once fatigue kicks in from the heavy medication.
      I've spent so much time planning I know need to get doing.
      Starting off in my new space coin rings, bentwood rings, copper bracelets. Simple easy creative stuff. As I said, to keep me sane and to get me out of the house. I'm very fortunate that we live on a farm with plenty of space . This is going to be one hell of a shed .
      Once things improve I can put my impulse purchases to the test.
      Wood lathe , welding gear, band sawmill. Along with others. I'm all for upcycling when I can .
      So my shed is being constructed in one of our barns , reclaimed blocks , windows doors , wood burner and flue .
      I'm itching to get started and this is what's driving me to get on with things while I'm recovering.
      Please know that your videos are really helping me on this journey and I thank you for that.
      The internet is wonderful thing when it's used like this . I live in not so Sunny West Wales UK. On farm in a little village in the middle of nowhere .
      Thanks for the reply I bet you're sorry now 🤣🤣
      Have a fantastic day and please keep up the great work.
      Charlie

  • @AStanton1966
    @AStanton1966 4 года назад +1

    I put one of these stoves in a gazebo and didn't do it to code. So far, I've had no problems. For wall clearance I used 1/2" cement board to shield the walls from heat. I only used single-wall black pipe. I exited out the gable end about one foot below the peak with only a 90 degree elbow. The end pipe is horizontal and I simply put a stainless cap on the end to protect from down draughts. Where the black pipe exits the gable end, I removed the wood and replaced it with cement board. Black pipe is cheap and easy to replace. I figure that I spent about $100 for the stove and kit, then another $100 for the pipe and cap.

    • @AStanton1966
      @AStanton1966 4 года назад +1

      You are right about code. It's always better to dot the "i's" and cross the "t's." because we all know that ice cream can happen. My gazebo costs me only a few grand and is far enough away from other structures not to be a problem. I had a laugh, though. I talked with one stove/pipe company about cost of pipe and transitioning through the roof. They told me if would be $700 for the cost of pipe just to get through the roof! I ended up not going through the roof and using black pipe from Tractor Supply for about $100.

  • @petepete66
    @petepete66 3 года назад +1

    Perfect 👍😁✌️ you can flat above with a hammer 🔨... so you can cook above

  • @happycamper2976
    @happycamper2976 2 года назад

    you shoud make a viedo of you making a raging fire then stuffing it full logs for very hot long burn

  • @timboltz7421
    @timboltz7421 4 года назад +1

    you should make a viedo firing up the wood stove and than filling it

  • @daveshaw9344
    @daveshaw9344 4 года назад +1

    What if you designed it to work with the barrel upright
    Put a metal grate in it, a door just below middle..would give lots of room below for airflow, and the flat top of the barrel available to set things on....kettles, pots, whatever
    Then if you REALLY want to heat the shop, the upright barrel gives you lots of room to get some thick steel pipes run through the barrel..the pipes being in the flames
    Get a fan blowing air through those hot pipes and you've made yourself an excellent heat exchanger
    Also, the longer the chimney pipe is the more opportunity it has to transfer the heat from the smoke into your shop
    So have the chimney go across the shop then up through the roof

  • @jonp9511
    @jonp9511 2 года назад +1

    How does the radiant heat work for you off that steel backsplash?

    • @IndyFarmLife
      @IndyFarmLife  2 года назад

      It defintiely warms up quite a bit and throws off some heat. The main purpose was to shield the 2x lumber for code purposes. It definitely does that. Dual purpose!

  • @rudygeorgiamulesandcountry1594
    @rudygeorgiamulesandcountry1594 3 года назад

    Insurance probably isn't going to pay out on any barrel stove as they are not certified units.
    Get the double top drum kit, well worth it and you'll save on chimney pipe.
    That kit will pay for itself in pipe savings alone.

    • @rudygeorgiamulesandcountry1594
      @rudygeorgiamulesandcountry1594 3 года назад +1

      I might suggest removing the damper from the flu ring and moving it further up the pipe. Not only is a bad idea to V- notch the attachment point, the handle wont get as hot to touch,, you also wont have to bend over to adjust it and place your magnetic thermometer below it.
      Also ... in any garage where the May be gasoline or other flamible solvents store, many codes require the open flame source to be a minimum of 18" above the non- flamible floor to limit the possibility of accidentally flash igniting flammable vapors.
      You might try leveling your (curve) of fire bricks with a layer of sand to keep hot coals and combustion air from working underneath.
      "S0TZ" company is no longer in business, but they were the leader in floating steel door and steel components in single and double drum stove kits back in the 60's, 70's & 80's

  • @chriscunningham6197
    @chriscunningham6197 4 года назад

    Very helpful thanks

  • @caddi70
    @caddi70 4 года назад +1

    Got my barrel and kit. didn't realize it was going to be such a pain, but using kero is killing me. I have unlimited wood

  • @richer4poorer
    @richer4poorer 4 года назад

    How big is your uninsulated building and how long does it take to heat it up...average starting temp vs. a comfortable temp? Great Video also!

    • @richer4poorer
      @richer4poorer 4 года назад

      Are you from Bremen? "Tim Martin Ford" I am just West of the Lake...

  • @micmacpole
    @micmacpole Год назад +1

    I would think cement board spaced 1" from the wall would be much safer as it will dissipate heat much better than steel.

  • @chaddalton3442
    @chaddalton3442 3 года назад

    Did you use sealant at your pipe joints?

  • @IBRIDGMAN
    @IBRIDGMAN 4 года назад +1

    Just to double check, you used insulated pipe to go through the wall and then insulated pipe running outside the building to the top of the chimney... You said this is 'to code', why is it important to run insulated pipe once you are through the wall, rather than transition back to the non-insulated pipe....?
    Thanks for the great video!

    • @adammartin676
      @adammartin676 3 года назад +1

      @@IndyFarmLife plus it keeps the flue gas hot

  • @ryanganser3651
    @ryanganser3651 4 года назад +1

    What high temp paint did you use?

  • @NunalSaPaa
    @NunalSaPaa 4 года назад +1

    I want to make one!

  • @curve5746
    @curve5746 2 года назад

    How warm does it get your shop?

    • @IndyFarmLife
      @IndyFarmLife  2 года назад

      I actually have another video about this on my page. I think it's called "does a barrel stove work" or something similar. I hope this helps!! Thanks for watching!

  • @rogolet2222
    @rogolet2222 4 года назад

    I LIKE IT

  • @HumorousHearsay
    @HumorousHearsay 3 года назад

    Code? I get people wanting to do it right but as for me I don’t have high dollar stuff in shop and they don’t even need to know I have one!!

  • @vacamike
    @vacamike 2 года назад +1

    What is the diameter of the flue?

    • @IndyFarmLife
      @IndyFarmLife  2 года назад

      6 inches. There is a link below the video with the product specs if you want to see.

  • @johng4758
    @johng4758 3 года назад

    Got mine up and running. Did a test fire outside but every time I close the door the fire goes out. This is after I've let it get good and hot and the damper is open and the little air regulator on the front is wide open. Any suggestions? I've had a wood stove in my house for years and never had this problem

    • @johng4758
      @johng4758 3 года назад

      @@IndyFarmLife good idea on the large bung. Yes my wood is definitely good and dry

  • @RACGARAGE
    @RACGARAGE 3 года назад

    but how well does it work!

  • @robbobcat7286
    @robbobcat7286 4 года назад

    so the bung in the barrel is the only way the stove gets air?

  • @missmamtube
    @missmamtube 4 года назад

    Shalom! Thank you so much for sharing with us all. Is it o.k. to use coal to burn in this barrel stove? Thank you and blessings!

    • @robertakers25
      @robertakers25 4 года назад

      DO NOT USE COAL,too hot and too much corrosive
      substances for thin barrel

  • @tomortale2333
    @tomortale2333 2 года назад +1

    THINK ''GRATE'' INSIDE IS BETTER WAY INSTEAD OF BRICKS CAUSE W/GRATES EASIER TO REMOVE FOR CLEASNIN ASHES THAN BRICKS!

    • @IndyFarmLife
      @IndyFarmLife  2 года назад

      That would aid in cleaning out ashes, but a grate alone won't protect the bottom of the barrel from getting too hot and melting through. You need firebricks/sand for that.

  • @jimmylindgren4908
    @jimmylindgren4908 2 года назад +1

    Why choose to lay the barrel side ways and not standing up ?

    • @IndyFarmLife
      @IndyFarmLife  2 года назад

      The kits are designed for the barrel to be laid on its side. If you stood it up, the door wouldn't fit the round side.

  • @Chief_Examiner_Stanley_W_Finch
    @Chief_Examiner_Stanley_W_Finch 3 года назад

    Is it safe to burn pine?

    • @henryholliday1
      @henryholliday1 3 года назад

      as long as the log are seasoned pine burns great it just does not leave a coal bed like hardwood does

  • @MyDadWorksAtMarcs
    @MyDadWorksAtMarcs 5 лет назад

    cool thanks man!

    • @paulfox5339
      @paulfox5339 4 года назад

      @@IndyFarmLife How hot can you actually get the shop up to with it?

    • @paulfox5339
      @paulfox5339 4 года назад

      @@IndyFarmLife Thanks for the quick reply, I think it will work well for my shop.

  • @jasonzee4561
    @jasonzee4561 4 года назад

    Put sand in the bottom of the barrel so wash dont rot the bottom out. Just get cement board put around barrel.

  • @tanyahanna6523
    @tanyahanna6523 4 года назад

    Barn chimney..install..Karen Carpenter.. prescription..the brothers Grimm..🧙💤🌹🌹

  • @pnhartz1006
    @pnhartz1006 4 года назад

    A little sand in the bottom will be fine also.

  • @filibertobarrera3839
    @filibertobarrera3839 4 года назад

    Those dam stove pipes are a bitch to snap together,many many sliced fingers.But man they are really leak proof.

  • @salempoor678
    @salempoor678 4 года назад +4

    "Code" or "building codes"
    When beurocrats get in bed with contractors.

    • @YerBrwnDogAteMyRabit
      @YerBrwnDogAteMyRabit 3 года назад

      The only ones getting fucked are homeowners. Pretty sure contractors would be just fine without codes and inspections.

    • @salempoor678
      @salempoor678 3 года назад +1

      @@YerBrwnDogAteMyRabit
      The code of Hammurabi. Builder pays with his life if his building falls down and kills someone. Over simplifying of course.
      Municipal building inspectors are fucking useless and city building departments aren't good for anything but stealing money.

    • @YerBrwnDogAteMyRabit
      @YerBrwnDogAteMyRabit 3 года назад

      @@salempoor678 Oh, well thanks for the education. Not sure how that one slipped past me given years of Catholic school imimprisonment. I couldn't agree with you more, so I'll see your inspectors and raise ya one tax assessor and one tax collector.

  • @rcarlisi63
    @rcarlisi63 4 года назад

    you need a double stove..........like the stove......but....2.....is better.............check it out......

  • @HermodTuft
    @HermodTuft 4 года назад

    Barrel stove kit😅😂😂😂😅.

  • @bill_y4762
    @bill_y4762 4 года назад +2

    I disagree you can definitely make a nice wood stove from plastic

  • @We_are_the_light
    @We_are_the_light 4 года назад

    The kits are more than 50 bucks man

  • @beautifuldisaster9534
    @beautifuldisaster9534 3 года назад

    Wish I had a man to help me do that lol 😂 wishful thinking lol

  • @patrickwozniak7049
    @patrickwozniak7049 4 года назад

    No disrespect, but you kinda resemble Donnie Wahlberg.

  • @dirtyswayze6017
    @dirtyswayze6017 3 года назад

    Well this was useless show me how to get these pipes together

  • @Derekdick89
    @Derekdick89 4 года назад +1

    I have similar shaped building about 30 x 35 and was wondering if it was able to heat it decently I also live in Iowa where we avg single digit temps during winter