I have had some experience of those Chinese single cylinder diesel engines, and I would recommend that to reduce the likely hood of balance shaft bearing failure you replace the factory fitted caged bearings with high quality maximum fill bearings. There are two balance shafts with a bearing at each end and the factory fitted caged bearings are prone to failure with catastrophic results.
Thank you very much for your comment. This particular engine is an SD model and only has 1 balancing shaft. I agree to replace the bearings. Otherwise these are very good engines. Do you have a youtube channel with engines?
KEEP SPARE VOLTAGE REGULATOR FOR ALTERNATOR STARTER CIRCUIT AND GENERATOR VOLTAGE REGULATOR IN A FARADAY CAGE FOR EMP AND CME PROTECTION...SPARE BELT IN CELOPHANE AS THEY AGE AND CRACK OVER TIME. SAME FOR HOSES AND FILTERS. YOU MAY NEED SEVERAL FILTERS IN AN EMERGENCY BECAUSE FUEL WHEN AVAILABLE MAY BE CONTAMINATED. A FUEL AND WATER SEPARATOR WOULD BE HELPFUL.
Thank you! It depends on the gear ratio. If your alternator has a 150mm pulley and you want your generator to run at 1500rpm, then your engine will reach 1500rpm, if its pulley is also 150mm.
What size generator do you have and what size pulley on the generator. I have a brand new jiangdong zh1115 diesel engine and a brand new Onan 15kw generator that I am getting ready to build a frame for. Would you be willing to share any information. I have had the engine for 5 years and just purchased the generator. I will be mounting it to I-beams for the frame. My name is Otis
Hi Otis, sure, I will share my knowledge. Please whatsapp me at +421904155143 and we can discuss your generator. ZS engines don't have lub oil filters, so I can explain how to fit one and that should be the first thing before you complete the generator. We've built a ton of generators before and I believe my tips would be usefull 🙂
@@DieseloveMotoryDOTsk thank you and I will set up WhatsApp and we can talk. This generator that I am building is for my personal emergency home use and not for sale, so your trade secrets are safe with me, besides the type of engine I am using is banned from import to the United States. I was just lucky enough to find a brand new engine that was being sold for parts, because it was illegal to sell as a running engine. How do I address you on WhatsApp. Do I reference this conversation. Anyway thanks again for taking the time to reply to my message. -Otis- -Otis-
Beautiful job, I like your custom alternator mount. Everything looks well engineered, I was happy you showed the electric radiator fan come on. Nice layout too, your engine fit perfectly on the frame. I do like the belt drive, I'd thought about direct coupling but you can get exactly the right RPM for both the pump and the engine. Are the wheels cast iron?
Thank you for your nice comment! I love the genset too, it's my most favorite out of all we've built. Next time we'll build a direct drive. I hope you stay tuned 😊
@@DieseloveMotoryDOTsk i love your build I already have way too much stuff according to my wife. By the way, I looked for fun at what it costs to get a diesel from China to the Netherlands.Dutch customs clearance is 20%, but on top of that the shipping costs...... really amazing . The Chinese have filled the European warehouse with stuff because the introduction of VAT on Chinese stuff was coming. And imports from a European warehouse have to be paid mutch less for in terms of transport.Buth no diesels, only cheap petrol engines. Why a diesel? Because you can get fuel for it that is not only much cheaper than petrol (here just over 2 euros per liter) and the best petrol 2.29 euros per liter .....Bwaaaaa) but you can also store it infinitely as you buy the right one (called blue diesel here). If you are a prepper, this is of course important ( i am not realy buth a little) t. And in an emergency, do you use cooking oil because that also seems to work very well, or used motor oil?A man on the internet claims his engine has been running without any problems for 5 years with it Greetings from Holland
@@henkholdingastate we have these engines in stock. If you are interested we can ship to you to Holand. We have already paid the customs so you don't need to worry about it. You will buy from Slovakia, which is an EU country. We'll ship door to door. Please whatsapp me at +421904155143 for more information. Thank you! 🙂
I have had some experience of those Chinese single cylinder diesel engines, and I would recommend that to reduce the likely hood of balance shaft bearing failure you replace the factory fitted caged bearings with high quality maximum fill bearings. There are two balance shafts with a bearing at each end and the factory fitted caged bearings are prone to failure with catastrophic results.
Thank you very much for your comment. This particular engine is an SD model and only has 1 balancing shaft. I agree to replace the bearings. Otherwise these are very good engines. Do you have a youtube channel with engines?
Where do I purchase an engine/ generator set up like this. I’m currently running duetz and how would you compare durability between these 2 engines
We sell these engines. These are the best Chinese single cylinders. If you are interested, please whatsapp me at +421904155143
i had a giggle at the "high quality" explosion sticker.
That thermostat switch can carry the load of the cooling fan motor? I bet not for very long. Most people use a relay in between. Just a suggestion.
KEEP SPARE VOLTAGE REGULATOR FOR ALTERNATOR STARTER CIRCUIT AND GENERATOR VOLTAGE REGULATOR IN A FARADAY CAGE FOR EMP AND CME PROTECTION...SPARE BELT IN CELOPHANE AS THEY AGE AND CRACK OVER TIME. SAME FOR HOSES AND FILTERS. YOU MAY NEED SEVERAL FILTERS IN AN EMERGENCY BECAUSE FUEL WHEN AVAILABLE MAY BE CONTAMINATED. A FUEL AND WATER SEPARATOR WOULD BE HELPFUL.
Good job, l have 24 HP engine, what is the recommended pulller size for engine and generator using belt system
Thank you! It depends on the gear ratio. If your alternator has a 150mm pulley and you want your generator to run at 1500rpm, then your engine will reach 1500rpm, if its pulley is also 150mm.
It's so ugly that I'm in LOVE WITH IT.
Thank you, me too! 😀
That really looks nice!
Thank you very much! 🙂
What size generator do you have and what size pulley on the generator. I have a brand new jiangdong zh1115 diesel engine and a brand new Onan 15kw generator that I am getting ready to build a frame for. Would you be willing to share any information. I have had the engine for 5 years and just purchased the generator. I will be mounting it to I-beams for the frame. My name is Otis
Hi Otis, sure, I will share my knowledge. Please whatsapp me at +421904155143 and we can discuss your generator. ZS engines don't have lub oil filters, so I can explain how to fit one and that should be the first thing before you complete the generator. We've built a ton of generators before and I believe my tips would be usefull 🙂
@@DieseloveMotoryDOTsk thank you and I will set up WhatsApp and we can talk. This generator that I am building is for my personal emergency home use and not for sale, so your trade secrets are safe with me, besides the type of engine I am using is banned from import to the United States. I was just lucky enough to find a brand new engine that was being sold for parts, because it was illegal to sell as a running engine. How do I address you on WhatsApp. Do I reference this conversation. Anyway thanks again for taking the time to reply to my message.
-Otis-
-Otis-
Kompletní Čína. Akorát pár kusů železa je ze Slovenska...😆
Beautiful job, I like your custom alternator mount. Everything looks well engineered, I was happy you showed the electric radiator fan come on. Nice layout too, your engine fit perfectly on the frame. I do like the belt drive, I'd thought about direct coupling but you can get exactly the right RPM for both the pump and the engine. Are the wheels cast iron?
Thank you for your nice comment! I love the genset too, it's my most favorite out of all we've built. Next time we'll build a direct drive. I hope you stay tuned 😊
Great build. I am planning to do the same. I have a 10HP Kubota and a 15 HP Changzhou. How much Diesel are you using per hour?
Thank you :) The consumption depends on the load but is usually from 0.5-2l per hour.
Beautiful!
Thank you! 🙂
GOOD video nice video Engine
That really is pretty.
Are the ball valves so you can use the unit as a cogeneration heat source?
Thank you Corey! 🙂
what is the maximum kw of the alternator? would love to see maximum load and distortion noise waveform
Is about 5kW at 1200 rpm
Where can you buy synchronous motors? I can only find induction ones
Nice build. What's the average fuel consumption at 3500 to 4500 watts?
Hi, is about 1l per hour
Very good🎉
Thanks 😊
Szép munka!
Thank you!
We wanted to see sum load on it
Please watch the whole video, it's there 😀
Single cylinder disel engine can use AVR system with dynamo. How to do adjust Rpm of engine and dynamo voltage??? May I know about it. Thank you.
These engines have an RPM controler
How relaxst running Top
Yes, these engines are very smooth! 🙂 Want one? 😀
@@DieseloveMotoryDOTsk i love your build I already have way too much stuff according to my wife. By the way, I looked for fun at what it costs to get a diesel from China to the Netherlands.Dutch customs clearance is 20%, but on top of that the shipping costs...... really amazing . The Chinese have filled the European warehouse with stuff because the introduction of VAT on Chinese stuff was coming. And imports from a European warehouse have to be paid mutch less for in terms of transport.Buth no diesels, only cheap petrol engines. Why a diesel? Because you can get fuel for it that is not only much cheaper than petrol (here just over 2 euros per liter) and the best petrol 2.29 euros per liter .....Bwaaaaa) but you can also store it infinitely as you buy the right one (called blue diesel here). If you are a prepper, this is of course important ( i am not realy buth a little) t. And in an emergency, do you use cooking oil because that also seems to work very well, or used motor oil?A man on the internet claims his engine has been running without any problems for 5 years with it Greetings from Holland
@@henkholdingastate we have these engines in stock. If you are interested we can ship to you to Holand. We have already paid the customs so you don't need to worry about it. You will buy from Slovakia, which is an EU country. We'll ship door to door. Please whatsapp me at +421904155143 for more information.
Thank you! 🙂
We can even build a whole genset for you, we have all the components.
How much is the AC head?
itu venbelx ukuran brpa bos
Dobrý deň, motory kupujete alebo si ich nechávate dovážať z inej krajiny?
Dobry den, motory dovazame priamo od vyrobcov.
@@DieseloveMotoryDOTsk a máte aj motory okolo 25hp a viac? Ak áno koľko stojí ten 25hp motor? Odkiaľ ste? Dovážate aj na slovensko?
@@leovicenik7666 Ano, my sme firma na Slovensku. Motory mame aj skladom. Mozete ma kontaktovat na cisle +421904155143
Китайський мотор і генератор, рама фабрична,що тут саморобне?
Sorry, I only speak English and Slovak.