I have a question. If one wanted to just have an individual vinyl on a board say a logo on top of a veneer with a clear over all of it how would someone make that die cut logo? But great tutorial 🤟🏼
hey bro great tutorial, I have a question, what is the paper on which you print the graph and how do you print it? Thanks and greetings from Colombia🙋🙋🙋
A while ago I got some clear water slide decal paper and I made a crystal pepsi skateboard deck. I've also done a few tech deck and I'm working on my own fingerboard mold. Great tutorial as always and I hope your skateboards are nearly there!
kinda late but this is how i do it: clear coat the wooden board till its smooth and then apply waterslide decal paper. if you dont clearcoat after that and use your board it should wear down gradually.
@@NorthWestDecksCustoms Why is clear decal paper always used? Is white decal paper not good for fingerboard graphics or what's the cause? I mean, would white decal paper work as a substitute, if you can't print white ink?
After printing and applying a coat of Acrylic clear sealer. Cut the graphic out to fit the size of the fingerboard/skateboard. Lay it in water for a minute. and carefully slide it onto the board.
hello I have a little doubt .. what kind of paper do you use ... why have I seen in other videos that you submerge them in water and the ink peels off as you do this? I hope you can answer .. greetings from mexico
so im about to do my first diy fingerboard because im sick of paying over 15 pounds or like 17 dollars a piece for them at my local shop so far with glue paper wheels truck etc my 4th ever finger board is costing me about 8 pounds or about 9 dollars which is a damn sight cheaper than buying one
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
The printer used here is HP ENVY 4500 its an inkjet printer and he prints on waterslide decal paper
Hi, do you have a tutorial on how to apply this? How and when do you cut it? Do you use white or transparant?
What paper did you use and how do you get the graphic on the fingerboard?
He probably used glue to stick it to the board
I have a question. If one wanted to just have an individual vinyl on a board say a logo on top of a veneer with a clear over all of it how would someone make that die cut logo? But great tutorial 🤟🏼
Hey thanks for the video! having a lot of fun with this however when I resize image I'm losing a ton of quality. Any idea what I'm doing wrong?
Let me look into solving that issue
what is the best paper for printing design with inkjet printer ?
How about 34 mm fingerboard graphics and up
change the size a bit
Wide it up with Photoshop or other softwares
@@windowsealtoo Would you happen to know how to do that in photoshop? ive been tryin to figure this out..
hey bro great tutorial, I have a question, what is the paper on which you print the graph and how do you print it? Thanks and greetings from Colombia🙋🙋🙋
@Ernie Uchiha thanks
Which sticker paper do you use for it?
i use the fingerboard template on photoshop cc. but when i print it. it is always oversize. i use a4 decal paper. how to fix this problem ?
A while ago I got some clear water slide decal paper and I made a crystal pepsi skateboard deck. I've also done a few tech deck and I'm working on my own fingerboard mold. Great tutorial as always and I hope your skateboards are nearly there!
That's really cool! I hope they get here soon! 😀
Will that template work for 33 and 34 mm wide fingerboards? Thanks for all the help!
Did you ever get a 33, 34 template?
How do you get the sticker paper and what do u print out of
Hell yeah!
Great tutorial!
Btw.....
Finally a fingerboard video with METAL MUSIC!!!!!!
Yea!, Everyone else put some kind of hiphoped music
Can you send me the link to the supreme Louise Vuitton tech deck template
Jake's Grind yes!
Dude changing the world !
What size did you print it?
what is the paper called
Are you using white decal paper? Or t
Transparent Decals?
I enjoyed the tutorial a lot.Cool learning how this works 🙌🏻
Thanks a lot but how do u apply it
What is the best site to get plain decks
the tutorial was top notch bro really detailed. best thing to keep in mind anyone who tries work with water slide graphics practice makes perfect.
How do I change this template to make it fit 33.6 board size?
Dude i love the monster garage theme in the transition
It took me forever to get a bumper/theme down haha
Thx Jake I’ve been waiting for a video like this
copy this, copy that, did you use a seperate tab to change the photo size and another tab open to paste in? Idk why i'm so confused lmao
Thanks alot but how do apply it
What was the other paper that you used that was expensive?
where buy this printing material ?
What type of paper/ink are you using?
What paper
34 mm?
What kind of paper do you use? And are they real wear?
kinda late but this is how i do it: clear coat the wooden board till its smooth and then apply waterslide decal paper. if you dont clearcoat after that and use your board it should wear down gradually.
Can it also be attached to a plastic fingerboard?
Hi did you use white water decal paper or clear water decal paper ?
Used the transparent
North West Decks thanks for the help
@@NorthWestDecksCustoms Why is clear decal paper always used? Is white decal paper not good for fingerboard graphics or what's the cause? I mean, would white decal paper work as a substitute, if you can't print white ink?
does this work on a plastic tech deck?
Hi can I get a custom fingerboard of the screaming hand like santa Cruz but with slame
are these real wear graphics?
what type of paper is that and is it a regular printer or photo printer
whats that photo editing software?
What software is that?
Such a good tutorial
I'll try to upload another tutorial this week bud!
North West Decks yo bro will this process work with all black wooden deck
@@tomi2251 yes, but put a blank white piece of paper first on it then put the graphic on
@@hw.lds08 so does that mean that the same goes for tan colored plastic decks?
@@CE_GD2.2 yeah depends on what paper u use but its basically the same process
how do you actually put it on the finger board
After printing and applying a coat of Acrylic clear sealer. Cut the graphic out to fit the size of the fingerboard/skateboard. Lay it in water for a minute. and carefully slide it onto the board.
I'll be going Live July 15th and answering any questions anyone wants answered.
What is the software you’re using called
Where can I buy the paper? Is it available on the Internet?
Yes online on eBay or Amazon is where I got my paper from.
Excuse me my guy, can you do me a favor? Mind telling me if the template is for 9.4 milimeter fingerboards? Also what type of paper size is needed?
What document u using
Does this work on mac
Is there a way to do this on mobile
Been waiting for this!!!!!!!!
How do I prepare the fingerboard before putting the graphic on
What paper do u use
What kind of paper?
Awesome fingerboard decal tutorial man🔥🤙🏻👌🏻👍🏻
what paper is this printed with？
there's no need to edit it and print it as what the size of the template?
What kind of paper are you using
What do you print your graffic on
Are they printed onto vinyl?
what paper did you use? what printer did you use?
Would the template work for tech decks?
How did you get the template layerd
Used paint. net software
Hey! What paper do i use?
It’s called water slide decal transfer paper. Available on most online sites like amazon.
Hi can you make a template that fits 33 to 34 millimeter decks
Did you ever get a template to fit 33 and 34 mm boards?
bro do i need to download first the adobe photoshop?
hello I have a little doubt ..
what kind of paper do you use ...
why have I seen in other videos that you submerge them in water and the ink peels off as you do this?
I hope you can answer .. greetings from mexico
Hi Mario, I use waterslide decal paper. 👍
What brand? ive seen other brands arent very bright and peel.
North West Decks what brand? Mine keep coming out clear where white should be...
How can I write on it
Nice Video As Always Homie, Thanks For All The Really Good Info. Keep Shredding Bro 😎
Size of template?
What paper is it?
Can anybksy give me 34mm template ?
Cool tutorial perfect explanation too!!!
Hey dude i tried waterslide decal paper and when i put it on the deck some of the graphic rubbed off any tips
I would try to add maybe an extra coat of clear coat spray 👍
@@NorthWestDecksCustoms can I use clear coat nail polish?
Hey NWD, is there any way to do it with out waterslide Decal paper, and how do you apply it?
DA LEGEND PICKLE nomal paper
Lots of great info in this video.
What if you you do 33
so im about to do my first diy fingerboard because im sick of paying over 15 pounds or like 17 dollars a piece for them at my local shop so far with glue paper wheels truck etc my 4th ever finger board is costing me about 8 pounds or about 9 dollars which is a damn sight cheaper than buying one
Great tutorial man 👌👍🔥
I love it
What paper did u use? Thanks
The kind that has sticky shit on one side.😜
what paper do you need
Water slide decal paper
cool video man
What paper need
Hey Lilnshy! Water Graphic Decal Paper. It's available online on eBay or Amazon.
what paper is needed?
Water slide decal paper
Awesome!
I've been busy lately but I'm catching up now. Sorry I'm so late buddy!
In phone pleass
Amazing video!
GAAAH!! I printed them rotaded 90% so now they are to big for the fingerboards!
I’m new I luv fnigerboarding and I’m wanting to draw a graphic right now but this is cool and all but my dad probably won’t let me. I’m subbing tho
Good video🔥
hi
I think you should also make a template of a 34 mm graphic cuz my fingerboard deck is 34 mm😣
Pretty litty
wow
Hey Jake.whats goin on
what is he saying in the beginning thought it was foreign
I'll just buy some
I like the part where he put it on a fingerboard
Thanks jake this rules