Hi dear, I have a doubt in your query, unit of couple is N-m, if it is kN/m means either UDL or variable load. please explain more and if possible please indicate time instance where you got doubt.
Actually conventions are decided by us, so it does not affeslct end result. As one will be positive and other will be negative so complete equation will always be balanced. The only thing we must follow is consistancy, whatever convention we fixed in the start must follow throught the question.
Hello, in the question the maximum load at the roller support is given as 100 N, this is nothing but the reaction at E, which is available. It it would not be given, the problem will become statically indeterminant as number of unknown will become 4.
The second example is wrong ,because you have 5 suport reaction and 3 equilibrium equations .Second example is undetermined you can do it like that. i might be wrong .i will be very happy if you explain me .
Dear Saif, What I understood is, horizontal force ka moment kyo nahi liya...actually, usaka line of action point of momont se pass ho raha hai so perpendicular distance zero hoga...if still it is not the answer of your query.. please mention time instance at that you have confusion
The sign does not matter for the way he is doing it, he put all downward forces on one side and upward forces on the other side of the = sign. He did Ay+ Ey= 120N+100N+90N+190sin60 if you were summing all y forces equal to zero then the signs would matter and it would look like such: Ey+Ay-120N-100N-90N-120sin60=0 the you move the negatives to the other side, and you would get the same formula he used, so the signs don't matter. - = + is the same as + = - so you don't need the sign of the forces unless you are setting them equal to zero. As long as you put all upward forces on the same side and all downward forces on the same side.
Tomorrow is my paper and I had some confusion in calculations but thankful to you for this great lecture. Done it in pretty comprehensive way
Very helpful video sir! Very well explained. Got the whole concept from this video
Please note that at the end 19.50 sec, Ay should be 33.3 N instead of 86.6 as ( 120-100sin60) ,,please correct.
33.40N
Thanks Sir. You're doing well
This one question analysis made my whole concept on mechanics of materials..very thankful to you
ruclips.net/video/fRyUf-GY754/видео.html
Complete lecture serie of mechanics for your refernce ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
You are the best🙏🏾 and your explaining is very calm and accurate. Thank you sir
Thankk you
ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
Thank u very much sir it cleared all my doubts
Thank you Sir🙏, for helping me understand this particular part
Complete lecture serie of mechanics for your refernce ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
thanks
found it very informative
Very useful for me 😉
Sir really its helpful ur my god tqsm ❤❤🙏🙏
So nice of you
ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
Really awesome teaching level 🔥🔥
ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
Best video thanks so much
Sir, your're the absolute best! Thankyou for existing!
Complete lecture serie of mechanics for your refernce ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
Thank you so much🙏
You did well😌✍
Loved it🤩🤩🤩🔥🔥🔥
Complete lecture serie of mechanics for your refernce ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
I learned a lot. Thanks. Job well done.
Property understood... Thanks Sir🤝
Our indian education system needs teachers like u . U have wonderful teaching ability great work sir🙏👌👌❤️
Thank you for your appreciation.
ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
Very Helpful. Tysm!
ruclips.net/video/fRyUf-GY754/видео.html
Thank you so much sir! BIG HELP ❤🙏
Most welcome!
ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
Thanks a lot sir 🤗❤🙏
Excellent
thanks a lot for being this descriptive
Thanks
Useful one
ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
very concise solutions, thankyou
ruclips.net/video/fRyUf-GY754/видео.html
ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
great explanation!
ruclips.net/video/fRyUf-GY754/видео.html
ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
Thank you so much sir, very helpful,♥️😊
ruclips.net/video/fRyUf-GY754/видео.html
Osm explanation sir
Thanks for liking
Nice teaching
Thank you!
you are super sir from ethiopia
Thank you for your appreciation
Very good explanation sir
Complete lecture serie of mechanics for your refernce ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
Very good video
thanks a bunch
Wonderful
Best video
ruclips.net/video/fRyUf-GY754/видео.html
ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
Thank you very much. I've learnt much from here
ruclips.net/video/fRyUf-GY754/видео.html
ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
Helpfull❤️🙏🙏
ruclips.net/video/fRyUf-GY754/видео.html
ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
do roller joints support horizontal movements if they are inclined?
Hi, I couldn't follow your query..can you elaborate.
good teaching methode
Tanq ❤️
Continuity 🌺
Why for inclined support we use derivatives of cos° and sin* can u explain pls
ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
Thank you thank you thank you sooo much for this video😫🙏🫀
thank you so much sirr jiii
ruclips.net/video/fRyUf-GY754/видео.html
Please I need your help with a problem
Thank you sir
ruclips.net/video/fRyUf-GY754/видео.html
sir why didnt u consider Ay while solving moment
Sir please help why does roller support at E has horizontal force?
please specify the time instance
ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
Sir I have a doubt ..
How should I write moment if the couple is 40kN/m in clock wise direction? Like if I change the units of the couple
Hi dear, I have a doubt in your query, unit of couple is N-m, if it is kN/m means either UDL or variable load. please explain more and if possible please indicate time instance where you got doubt.
@@ashishpurohit9138 sir I have a doubt that if I change the units of couple like kN/m then what will be the moment (In case of over hanging beam)
ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
Sir how to find E I can not understand that plz help me
Can you please indicate time instance....
CW is Negative and CCW is positive ! Thats what we learned to our teacher.
Actually conventions are decided by us, so it does not affeslct end result. As one will be positive and other will be negative so complete equation will always be balanced. The only thing we must follow is consistancy, whatever convention we fixed in the start must follow throught the question.
For your last question I don't understand how you got 86.6 for your Ay.
I keep doing it and I end up with 120-86.6 = 33.48
Sir at 16:41 how the angle is 90 -30 = 60 ?
ruclips.net/video/fRyUf-GY754/видео.html
ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
awesome
ruclips.net/video/fRyUf-GY754/видео.html
ruclips.net/p/PLi0hoi2vOpnQ1wu7w4CMSUobzKuWIEThQ
How did you get a 100 for reaction at E? (the last problem)
Hello, in the question the maximum load at the roller support is given as 100 N, this is nothing but the reaction at E, which is available. It it would not be given, the problem will become statically indeterminant as number of unknown will become 4.
@@ashishpurohit9138 ah okay, I did not see that. Thank you!
@@ashishpurohit9138 I think the reaction at Ay=33.4 N from (120-100sin60)
@@marykareenfayeabellar105 yes, it is calculation error, I have put a comment . thank you very much.
Tq sir
ruclips.net/video/fRyUf-GY754/видео.html
The second example is wrong ,because you have 5 suport reaction and 3 equilibrium equations .Second example is undetermined you can do it like that. i might be wrong .i will be very happy if you explain me .
ruclips.net/video/fRyUf-GY754/видео.html
How the angle is 60 degree?
Dear Sanjay, Can you mention the time instance
@@ashishpurohit9138 sir at 16:38
14:36 problem is having a problem🤣🙏...happens
can you please elaborate..what prob you observed
how did you get the answer as 86 for Ay .Its clear not.
Plz mentioned time Instance
koi nit raipur wale ye dekh rahe ho to bta du ye question pyq me aaya tha
Ay ? =120-100sin60° = 33.40N
Yes it is a calculation error in the video. Thank you
7:34
9cly thanks a lot
ruclips.net/video/fRyUf-GY754/видео.html
How did you get 7 because we have 8?????????
Sir 5+3 is 8 not 7
ruclips.net/video/fRyUf-GY754/видео.html
Moment liye to horizontal force nhi liye kyo horizontal force liya jata kya
Dear Saif, What I understood is, horizontal force ka moment kyo nahi liya...actually, usaka line of action point of momont se pass ho raha hai so perpendicular distance zero hoga...if still it is not the answer of your query.. please mention time instance at that you have confusion
Summation of forces in y direction upwards forces positive downwards forces negative you did not day it
Can you please specify time instance where I missed it...
The sign does not matter for the way he is doing it, he put all downward forces on one side and upward forces on the other side of the = sign. He did Ay+ Ey= 120N+100N+90N+190sin60 if you were summing all y forces equal to zero then the signs would matter and it would look like such: Ey+Ay-120N-100N-90N-120sin60=0 the you move the negatives to the other side, and you would get the same formula he used, so the signs don't matter.
- = + is the same as + = - so you don't need the sign of the forces unless you are setting them equal to zero. As long as you put all upward forces on the same side and all downward forces on the same side.
Very bad bro try in different ways
Thanks dear, can you point out area to be improved
Thank you 🙇♀️
Awesome