My father used two bent brazing rods. My grandfather used a fresh willow branch. Together they did dozens of wells for themselves and each one was very good. They built houses on speculation. The well that my father taught me on, was the best. It was about 100 feet deep and didn't need a pump. It also was the best tasting water. When I did my well for my house it was scary because all of the wells in the neighborhood were very deep and poor production. I hired a friend of a friend who used plenty of flush water. At 85 feet he hit 10 gallons per minute. I had him drill to 200 feet and set the pump at 150 feet. The phreatic surface is only 12 feet down. Those are very nice rods and an interesting video. I personally think that it is the dowser that is important. Good Luck, Rick
When I was a kid, some old guy was walking around our field with some magic sticks. My grandpa was gonna pay the guy $200 to find the perfect spot to drill a well because this guy had 100% accuracy for the 40yrs he'd been dowsing in our county. Then I explained to grandpa how aquifers worked and that we were sitting on one the size of 3 states, and he kicked the guy off the property. Then he just picked a spot next to the house, dug a well, and boom! Water!!! I guess my grandpa was magic too. 🤣
Hi we geologist of the hobbyist caliper who live among thousands of abandon mines here in the less known high desert mining area of California and we like your devices, we are not precious metals hunters but we like to as hobbyists wonder about periodically across the desert floor seeking interesting fines. So your tools are some we would try. Thank you for the share, Lance & Patrick. we found your sharing great, the details of how to make these sets was clear as well. They look near too.
@@SoatMon No sadly no we are more visual and surface digging mainly around outcrops of quartz as we live in a very tectonic prehistoric volcano area of the California Desert near the Joshua Tree National Park., thank you for asking. L&P.
A very complete and clear video for anyone who has the same hobby for treasure hunting. I am very pleased with your discovery. what if put in a sulfur tube, mercury and gold ... ?? does it affect the sensitivity of the tool or is it really good ... ?? Please explain.
Nice video, need to mention that you must not insulate the rod with sellotape or anything, the base that holds tre rod, should make a "circuit" with your hands. Imagine the rods as the extended antenna of your body. Also every human is unique to the amount of energy, something that you can measure it with a simple multimeter at millivolts. Then after you construct the rod, through practice, you keep adjust the length of the L rod and adding at the tip various precious metals like silver or gold. In time you realise how important are all those details. Of course the rods are working, no matter what anyone who dont believe it, or doesn't know that object at all. But always remember that the rods just help you to get as close is possible to your target, after that you gonna need a decent metal detector to pinpoint the target. I have huge experience on this as i manage to find small little'treasures' , for example: ppl back in time didn't have banks to deposit valuables, nuggets, juels and money-coins, so they keep em at small leather bags, mostly, when they travel around, or they hide em at places in or out of their homes and when they travel and see you n distance something, they quickly hide that little bag in a place that doesn't change much in time, like a big rock or old big tree or a water fountain etc.... So none f you can find annold path and can imagine how ppl act back in old the mes, you'll see where is possible to hide something valuable. I use to construct very reliable dowsing rods for a lot of ppl and many of them manage also to find old ' wallets' with silver , gold coins and other precious things. I still make em and also have a nice collection of old gold, silver and copper based coins and relics. U can ask me anything....😉
Is it best to use copper rods or brass rods, I'm trying to learn the old ways that have been lost in time. Any information would be useful. Any old traditional secrets not just dowsing. Thank you for your time.
@@tempus.narrabo well, my uncle and my dad , when they use to search for ...gold, they just use a simple copper wire in L shape and always they were barefoot at the mountains always looking from north to south, after they ...lets say meditate for a bit before they start. They found only very small bags with a few coins in it a few times but nothing more... They told me also that they were out only specific days of the year and never when its about to rain or very cloudy.... Forgot to tell u that atthe tip of the rod they use tu pit a little piece of gold teeth.....
@@tzimiz77 thanks for that, very interesting all this stuff isn't it. I think all the comforts and material goods make us lazy and forgetful. Thanks again.
@@tempus.narrabo no worries mate, anytime. If you are a outdoor guy and you like the adventures, is an interesting hobby, for many points of view.... ✌️
Thank you very much for this informative video! What machine are you using as a lathe/drill press and do you have any suggestions on how to drill the holes by hand without them going squirrelly? I assume without some sort of lathe there isn't really a good way to narrow the copper pipe enough to get the 1/2" cap on after inserting the 3/8" fitting
Most of us are not skilled tradesmen with lathes, and thread cutters. Nice video though. I curious why you did not start using sacred geometry of the Egyptian Cubit or multiples of it. That would make your rods much more powerful.
Hi there . I was wondering if I could buy a pair of those dowsing rods that you made. So far they look like the largest handles that I would feel comfortable using. I just do not have the equipment to do it. Thanks
Thanks love your video on this. I think the way you made the rods with the swivel is really great but, when my friend Randy made them up he just took two coated welding rods and simply bent them and held them loosely enough I suppose that they worked for him and my wife. But I am going to make up a set from your design.....maybe that will work for me. Hope so. Will let you know. Thanks again.
Great. Like I said in the video my Brother in Law has more consistent results that I do. I think my issue is holding the rods too tight, when I loosen up it works better. Good luck!
If you're looking for groundwater table, call any well drilling company in your area. They all know how deep the water table is in each area. If you're looking for a water line, call 811. If it's a private line, guess and grab a shovel. That's all you're doing with the sticks anyway, but at least you won't look stupid.
I had an epiphany about ancient egypt and what the pyramids were used for. I think it has something to do with the the science behind dowsing rods. It's just a deep thought I had.
The dowsing rods built in this video cannot gauge with precisely deciphering what is being dowsed. Read and study the book, The At of Dowsing - Separating Science from Superstition ($14.95), by Michael Fercik, for learning all of the physics involved in dowsing and how to build the modern light weight ball bearing dowsing rod, which is the only dowsing rod that accurately gauges what is being dowsed by pitting the energy of gravity against the energizing of the one-tenth ounce dowsing rod load that is attached on the elevated acetylene with being located five-inches from the hub's shaft. This precisely gauges the dowsing of all edges, exact center, depth buried with angle of deposition, and most important is grading of the dowsed element that is contained in the elemental mass that is being dowsed. Anybody can become a professional dowser by practicing the book's dowsing lesson of buried pipelines and electrical cables, tunnels and voids, precious metal placer and lode deposits, dowsing for treasure, dowsing for any element, amplified long distance dowsing from a moving vehicle, and dowsing on water from a boat.
Im sorry my friend bad video I thought you meant do it yourself but you got all those fancy tools and I don't have all those tools please make a new video with house hold tools you would have not those fancy machines you were using but I hope you make a new one thanks man
You can just use the copper wire bent and hold the ends loosely to allow and feel movement . you really dont need to do all this what he is making is a glorified dowser and it is real nice and all- you just dont need all that to accomplish the same results-
...It is the same to make up comments on the movements of the stick as you walk through and squeeze the stick in hand while looking at the sediment shapes remaining at the bottom of the coffee cup. The event has nothing to do with groundwater.
![Jack Harlow - Hello Miss Johnson [Official Music Video]](http://i.ytimg.com/vi/Q86_nlRoIGw/mqdefault.jpg)
Wow ! These downsing rods are at a commercial level of quality. Not many people can make rods like this. Thank you for sharing this information !
You're welcome! Glad you liked it!
@@SoatMon what is the price of this rod
Can. You sell readymade rod?
Really nice! I just use two copper wires
My father used two bent brazing rods. My grandfather used a fresh willow branch. Together they did dozens of wells for themselves and each one was very good. They built houses on speculation. The well that my father taught me on, was the best. It was about 100 feet deep and didn't need a pump. It also was the best tasting water.
When I did my well for my house it was scary because all of the wells in the neighborhood were very deep and poor production. I hired a friend of a friend who used plenty of flush water. At 85 feet he hit 10 gallons per minute. I had him drill to 200 feet and set the pump at 150 feet. The phreatic surface is only 12 feet down.
Those are very nice rods and an interesting video. I personally think that it is the dowser that is important. Good Luck, Rick
Thanks Rick!
When I was a kid, some old guy was walking around our field with some magic sticks. My grandpa was gonna pay the guy $200 to find the perfect spot to drill a well because this guy had 100% accuracy for the 40yrs he'd been dowsing in our county. Then I explained to grandpa how aquifers worked and that we were sitting on one the size of 3 states, and he kicked the guy off the property. Then he just picked a spot next to the house, dug a well, and boom! Water!!! I guess my grandpa was magic too. 🤣
My father just used wire from old coat hangers and straightened it out. Worked well for him.
Works for me too!!
Really all that’s necessary or even Willow branches for finding water
Same. Also, Y shaped tree branches.
ihave it also but with frequency..
Hi we geologist of the hobbyist caliper who live among thousands of abandon mines here in the less known high desert mining area of California and we like your devices, we are not precious metals hunters but we like to as hobbyists wonder about periodically across the desert floor seeking interesting fines. So your tools are some we would try.
Thank you for the share, Lance & Patrick. we found your sharing great, the details of how to make these sets was clear as well. They look near too.
Thanks Lance and Patrick. Have you used any in the past to find metal?
@@SoatMon No sadly no we are more visual and surface digging mainly around outcrops of quartz as we live in a very tectonic prehistoric volcano area of the California Desert near the Joshua Tree National Park., thank you for asking. L&P.
A very complete and clear video for anyone who has the same hobby for treasure hunting.
I am very pleased with your discovery. what if put in a sulfur tube, mercury and gold ... ?? does it affect the sensitivity of the tool or is it really good ... ?? Please explain.
I don't have any experience with anything other than water.
@@SoatMon merhabalar. Banagonder.birtakim
@@SoatMon 0532.4737894
Nice video, need to mention that you must not insulate the rod with sellotape or anything, the base that holds tre rod, should make a "circuit" with your hands. Imagine the rods as the extended antenna of your body. Also every human is unique to the amount of energy, something that you can measure it with a simple multimeter at millivolts. Then after you construct the rod, through practice, you keep adjust the length of the L rod and adding at the tip various precious metals like silver or gold. In time you realise how important are all those details. Of course the rods are working, no matter what anyone who dont believe it, or doesn't know that object at all.
But always remember that the rods just help you to get as close is possible to your target, after that you gonna need a decent metal detector to pinpoint the target.
I have huge experience on this as i manage to find small little'treasures' , for example: ppl back in time didn't have banks to deposit valuables, nuggets, juels and money-coins, so they keep em at small leather bags, mostly, when they travel around, or they hide em at places in or out of their homes and when they travel and see you n distance something, they quickly hide that little bag in a place that doesn't change much in time, like a big rock or old big tree or a water fountain etc.... So none f you can find annold path and can imagine how ppl act back in old the mes, you'll see where is possible to hide something valuable.
I use to construct very reliable dowsing rods for a lot of ppl and many of them manage also to find old ' wallets' with silver , gold coins and other precious things. I still make em and also have a nice collection of old gold, silver and copper based coins and relics.
U can ask me anything....😉
Is it best to use copper rods or brass rods, I'm trying to learn the old ways that have been lost in time. Any information would be useful.
Any old traditional secrets not just dowsing.
Thank you for your time.
@@tempus.narrabo well, my uncle and my dad , when they use to search for ...gold, they just use a simple copper wire in L shape and always they were barefoot at the mountains always looking from north to south, after they ...lets say meditate for a bit before they start. They found only very small bags with a few coins in it a few times but nothing more... They told me also that they were out only specific days of the year and never when its about to rain or very cloudy.... Forgot to tell u that atthe tip of the rod they use tu pit a little piece of gold teeth.....
@@tzimiz77 thanks for that, very interesting all this stuff isn't it.
I think all the comforts and material goods make us lazy and forgetful.
Thanks again.
@@tempus.narrabo no worries mate, anytime.
If you are a outdoor guy and you like the adventures, is an interesting hobby, for many points of view....
✌️
My question is, my brother, how do I isolate the radiator and the iron and search for gold? I only want the skewers to tax the gold only
Thank you very much for this informative video! What machine are you using as a lathe/drill press and do you have any suggestions on how to drill the holes by hand without them going squirrelly? I assume without some sort of lathe there isn't really a good way to narrow the copper pipe enough to get the 1/2" cap on after inserting the 3/8" fitting
I need one set how much sir
Most of us are not skilled tradesmen with lathes, and thread cutters. Nice video though. I curious why you did not start using sacred geometry of the Egyptian Cubit or multiples of it. That would make your rods much more powerful.
good point
EVERYBODY!! Quick buy a lathe to turn down the 1/2 inch tube!! LOLOLOL
wats total inches of bronce do I need to do that front part ? THANS.....nice video sorry for mi ingles
Hi there . I was wondering if I could buy a pair of those dowsing rods that you made. So far they look like the largest handles that I would feel comfortable using. I just do not have the equipment to do it. Thanks
good day can I ask you to write the correct marking of the bronze rod (Radnor)? thank you
Thanks for the video Incredibly easy. Best regards
You are welcome!
عمل ممتاز احسنت تستحق كل التشجيع.
you can build your own as well! it is very simple and you can ممكن تصنعها بنقسك بسهوله جدا
How much, i want to buy
I need one set how much bro
Very beautiful and professional
Thank you
Thanks!
Where do i buy downing rod sir?
Nice job ! Thanks !
Thank you!
Thanks love your video on this. I think the way you made the rods with the swivel is really great but, when my friend Randy made them up he just took two coated welding rods and simply bent them and held them loosely enough I suppose that they worked for him and my wife. But I am going to make up a set from your design.....maybe that will work for me. Hope so. Will let you know. Thanks again.
Great. Like I said in the video my Brother in Law has more consistent results that I do. I think my issue is holding the rods too tight, when I loosen up it works better. Good luck!
Where can I buy the finished dowser thank you
for L rods, it is very easy to make it yourself and much cheaper. for Y rods, it is better to buy it since it requires more details and calibration
How much is that kind of dawsing ruds?
I would like to purchase two sets (4) of your dowsing rods. Do you have a link to purchase them? Thank You.
Is it possible to identify underground gold? Can the distance be identified?
People claim yes but I have no experience with it. I have only used it to find water pipes.
ALLAAHU AKBAR
TRIMAKASIH DARI MUSLIM DI JAKARTA INDONESIA.
Greetings
I want to buy from your products..how much..?
Do you do custom orders? I would like to make it my own but don’t have anybody tour tools.
Sorry I don't.
How much?
Sorry I don't sell them.
For purpose os that dowsi g rod sor?
How do these work? How are they affected to find water?
Here is a video I did about it, ruclips.net/video/cD6uvoHcVYc/видео.html read through the comments, there is a lot of good info in there.
It is a phenomena of Resonance. and yes, it works. I have been doing it for years!
You are a master ..
6:16 😊
❤❤❤❤❤
Thanks!
how do you find the depth of the water source?
If you're looking for groundwater table, call any well drilling company in your area. They all know how deep the water table is in each area.
If you're looking for a water line, call 811.
If it's a private line, guess and grab a shovel. That's all you're doing with the sticks anyway, but at least you won't look stupid.
Gd evning sir how much?
Do you make to sell? I don't have a lathe😬😞
Sorry no but if you want to play with it, you can use bent wires. Just hold them loosely in your hand. I used a couple of brass ones for years.
@@SoatMon I had some but lost them at the week end. They are very good! It's fine I'll make another pair. Yours are most admirable though. 😊
How much ser
How much your L rod sir?
I had an epiphany about ancient egypt and what the pyramids were used for. I think it has something to do with the the science behind dowsing rods. It's just a deep thought I had.
hello... sir iam your subscriber from indonesia , do you selling this itam ? how can buy this itam please ? where i can buy this please ?
I don't sell them. Try a couple of bent brazing rods or any copper or brass rod and hold them loosely in your hands, they will work almost as well.
Looking for water
I want to avail..how Much is the prize..I want to order..
Sorry I don't sell them.
This dude is a yakuza member
The dowsing rods built in this video cannot gauge with precisely deciphering what is being dowsed. Read and study the book, The At of Dowsing - Separating Science from Superstition ($14.95), by Michael Fercik, for learning all of the physics involved in dowsing and how to build the modern light weight ball bearing dowsing rod, which is the only dowsing rod that accurately gauges what is being dowsed by pitting the energy of gravity against the energizing of the one-tenth ounce dowsing rod load that is attached on the elevated acetylene with being located five-inches from the hub's shaft. This precisely gauges the dowsing of all edges, exact center, depth buried with angle of deposition, and most important is grading of the dowsed element that is contained in the elemental mass that is being dowsed. Anybody can become a professional dowser by practicing the book's dowsing lesson of buried pipelines and electrical cables, tunnels and voids, precious metal placer and lode deposits, dowsing for treasure, dowsing for any element, amplified long distance dowsing from a moving vehicle, and dowsing on water from a boat.
Sir can i buy your available dowsing
I don't sell them but thank you for asking.
Measure ment of rods
Doesn't really matter, somewhere between 12 and 16 inches.
Not many people have that type of equipment at home.
Agreed!
Making a prototype but no function
Can you sell me a set of those dowsing rods..??
Sorry I don't sell them.
Hi can you make me a set of the same please ?
I am sri lanka.please help me?
Can you help me
30 c m
or 40 cm cod scan gold
ruclips.net/video/cLwpGaZ4ddI/видео.html Your curiosity!
All use copper
HIGH DOLLAR !!!
Can you make ghost and alien detectors too?
What material needed to Make That..
Small bent copper wire will work for dosing
Hello
I am Sri Lanka
So I won't find gold messing my Cantre have gold please help me
Im sorry my friend bad video I thought you meant do it yourself but you got all those fancy tools and I don't have all those tools please make a new video with house hold tools you would have not those fancy machines you were using but I hope you make a new one thanks man
You can just use the copper wire bent and hold the ends loosely to allow and feel movement . you really dont need to do all this what he is making is a glorified dowser and it is real nice and all- you just dont need all that to accomplish the same results-
تحياتي سيدي عمل جيد هل المقبط يكون عازل القضيب سيغ ام يكون متلامسين وشكرا على اجابة
These don’t work if you tilt your hand forward at all or side by side it moves them and it’s impossible to control every movement.
...It is the same to make up comments on the movements of the stick as you walk through and squeeze the stick in hand while looking at the sediment shapes remaining at the bottom of the coffee cup. The event has nothing to do with groundwater.
Why not using a glue for the first two parts. All this cleaning blablabla, just glue and done.
You know I never thought of gluing them, but I that is a much simpler solution. Thanks for the idea!
Do you people believe in this?
ruclips.net/video/cLwpGaZ4ddI/видео.html Your curiosity!
How much?
Sorry I don't sell them.
Hi