The bike looks and sounds good. The smile on your face when you spun the rear tire says it all. With GPS providing you with parts, you can finally get your projects to the way you envisioned. Money constraints hampered you from making things like you wanted.
Custom fit side fairings an rear pannels will look awesome if they are done right, a front guard is needed to. A minni super moto look would be killer. Nice vids mate well done 😁 Mark.
When you make the body covers, maybe make a 2 piece on the filter side that only covers the empty space? Thus the filter & pull start are exposed. I think that would make it look crazy cool while allowing plenty of air flow.
Great job man. With go power sports behind you you’ll be doing some cool stuff for sure. If I had their support for the deathtrap it would have been X10 a 400cc Minibike that is an engine an seat and wheels? That’d be really cool
good work tank is nice like that bracket you made dont burn yourself out premature you have come to a long ways and i look for you to go far you have drive sometimes i wish i had a lot more good luck i have to put a clutch on my little mini wheeler i call the steel wheeler it has a chainsaw motor the clutches are kinda weak so it gets a upgrade you might try using your another cam on amount to get other views
I liked it the way it was but I also like the bike this way too 🤔. I don't know if it's me, the recording or what, but allot of these engines (and not just this builder but others also) sound as though their idling way to high. Anyway, great build young man! keep'em coming!!!
Your videos are amazing and have inspired me to build one of my own but I can’t get the right dimensions, can u please post a video of the measurements and stuff it would be soooo helpful thanks
Hey man just an idea kinda want to see a big vtwin or something similar "rather be welding" mini or 3/4 scale chopper build series again just an idea not sure but I would think GPS would work with you on the project to showcase their 301cc pred engine and you could do custom exhaust / cool pointed cone air filter and what not chopper it up
the 6.5 hp motor could pull the gearbox? how about using a larger(8-13hp) motor with the gearbox. i'd try a larger gear on the driven side off the motor. don't give up on that idea, there are plenty of dirt bikes with bad motors out here.
Don't hide nothing leave it naked looking damn good like it is just painted and you need to remove that governor is just a few easy steps they are plenty videos in RUclips and you will see the difference👍
make front fairing to it from thin aluminium, like on older sport bikes. u could easily shape the thin aluminuim and then rivet it. just get like the front screen/windscreen from like from yamaha tzr 125 and shape the front fairing like that. i guess u get what i am saying.
Use a pit bike muffler the 28mm inlet one off amazon for cheap and bore it out with a die grinder or the lathe they sound better and look better for this app
Get a drone that connects and follows the person wearing the beacon device. Pick an open enough area to avoid drone obstacles and you'll corner the "subscriber market"
Check out do it with Dan's videos and Jake the garden snakes videos they are motovloggers and have some great camera setups especially Jake's gives a pretty in depth feel to the ride
Work with redbeard see if he can help u convert this predstor to electric start thrn mske covers like u ssying . msybe make s removable hatch incase u need pullstart
Lucky Fawker not unless he put cowls on the front to direct air to the top end like a water cooled mx bike. I kinda dig the cafe racer look it has now tho so I vote minimal paneling if any.
Bạn rất sáng tạo 👌
The bike looks and sounds good. The smile on your face when you spun the rear tire says it all. With GPS providing you with parts, you can finally get your projects to the way you envisioned. Money constraints hampered you from making things like you wanted.
Two years later: *Still waiting for the next video... 💀
I like your editing, just enough action and not too long
This thing is my new favorite thing on the channel. I wish they made minibikes that actually resemble real motorcycles.
What can't you do!!!! Seat looks great. Keep up the great videos
Custom fit side fairings an rear pannels will look awesome if they are done right, a front guard is needed to. A minni super moto look would be killer. Nice vids mate well done 😁 Mark.
I think it looks great the way it is other than the wheels not matching. The design of the fuel tank fits that bike well!
I’m glad Go Powersports started to help you out! You deserve it, you worked your a$$ off.
The motorcycle is by far the coolest build
I’m so happy for you that you now have a sponsor! But bro... take off the governor
You should add some stitching across the crease in the seat cover. It would look really cool that way
Now that's a bike!! Good build.
I love that exhaust it looks really good
*Looks Great!!!*
Love the Fuel Tank!
When you make the body covers, maybe make a 2 piece on the filter side that only covers the empty space? Thus the filter & pull start are exposed. I think that would make it look crazy cool while allowing plenty of air flow.
Great job man. With go power sports behind you you’ll be doing some cool stuff for sure. If I had their support for the deathtrap it would have been X10 a 400cc Minibike that is an engine an seat and wheels? That’d be really cool
your craftsmanship has improved, it looks nice how about making a bigger one
You should really get youreself a camera man, it could help you you're videos a lot , keep up the good work man
Gorge Hennon yea man, that's so true man, you couldn't have said it better man, a better camera forsure man
Gorge Hennon he means “camera man” chill out
Panels would look great with some scoops for air and it would be a great place to stick some go power sports stickers
Best mini bike build ever awesome
good work tank is nice like that bracket you made dont burn yourself out premature you have come to a long ways and i look for you to go far you have drive sometimes i wish i had a lot more good luck i have to put a clutch on my little mini wheeler i call the steel wheeler it has a chainsaw motor the clutches are kinda weak so it gets a upgrade you might try using your another cam on amount to get other views
I liked it the way it was but I also like the bike this way too 🤔. I don't know if it's me, the recording or what, but allot of these engines (and not just this builder but others also) sound as though their idling way to high. Anyway, great build young man! keep'em coming!!!
bike looks so much better niow.
Great looking SEAT!
How about some FENDERS?
keep it up!
I would also think about shortening the exhaust up a tiny bit and just hang the muffler in the center above the rear tire. LOOKS F*&^kin' awesome
I've just got my hands on a 250cc tab and hopefully I can make a video about it
looks like that never happened
Your videos are amazing and have inspired me to build one of my own but I can’t get the right dimensions, can u please post a video of the measurements and stuff it would be soooo helpful thanks
Hey man just an idea kinda want to see a big vtwin or something similar "rather be welding" mini or 3/4 scale chopper build series again just an idea not sure but I would think GPS would work with you on the project to showcase their 301cc pred engine and you could do custom exhaust / cool pointed cone air filter and what not chopper it up
sweet upgrade
Plating is not necessary but put fenders on both weels it will make it look way nicer and finished
Awesome stuff!
Resess the shock into the dead space more and move the wheel forward 1 1/2 - 2 inches, the length of the chainstay changes turning radius alot
the 6.5 hp motor could pull the gearbox? how about using a larger(8-13hp) motor with the gearbox. i'd try a larger gear on the driven side off the motor. don't give up on that idea, there are plenty of dirt bikes with bad motors out here.
What’s your story. How did u learn all this stuff about motors and stuff like that
What welding do you use?????
Awesomeness 😎
put panels on the sides and bottom so air goes through, it'd look cool still
Don't hide nothing leave it naked looking damn good like it is just painted and you need to remove that governor is just a few easy steps they are plenty videos in RUclips and you will see the difference👍
Is that a Chinese frame or did you build that
Man U really need to get some dirt bike tires and rims on it it would look nice
You should get motorcycle fairings and make brackets to make them fit
You should build a little metal tail cap like a cafe racer style.
you can add wents to the panels it woud look kool and it woud cool the engine , aluminium panels woud be the best
What kind of welder do you use to weld your creations up?¿
Nicholas Pitts He's got a really old farmhand I believe
make front fairing to it from thin aluminium, like on older sport bikes. u could easily shape the thin aluminuim and then rivet it. just get like the front screen/windscreen from like from yamaha tzr 125 and shape the front fairing like that. i guess u get what i am saying.
Use a pit bike muffler the 28mm inlet one off amazon for cheap and bore it out with a die grinder or the lathe they sound better and look better for this app
Check out the Soloshot camera might give you what you need for riding videos.
Fuck i like it so much good job borw
LIKE !!!!!!!!!!!!!
mini chopper next huh?.Also we need longer videos
Definately woulda ran the seat the other way, or made a front and rear 'riser' or whatever. Nice job on the seat tho!
Thumbs up
buen video
Get a drone that connects and follows the person wearing the beacon device. Pick an open enough area to avoid drone obstacles and you'll corner the "subscriber market"
get Go Pro on tripods. and set them up on side of road and on the path u take
Dang it slightly quieter
Ride the 85 again
Check out do it with Dan's videos and Jake the garden snakes videos they are motovloggers and have some great camera setups especially Jake's gives a pretty in depth feel to the ride
Get like a used motorcycle engine and gearbox and build a bigger one of these
How about a drone and a camera on it?
wow
Get you a drone and let it follow you above the trees and film you.
Drive the two speed go kart I want to see that bud of u doin that
"basicly gett this thing to run" procceds to show time-lapse of him wrapping seat lol
it looks like a stunt bike
Work with redbeard see if he can help u convert this predstor to electric start thrn mske covers like u ssying . msybe make s removable hatch incase u need pullstart
What happened to Ryan? He did good video with you, plus he rode crazy!
Last we knew, he left for Basic Training.
You should do a third person mount GTA style
Gopower sports is not cheap.
Put a fat slick on the back it would be sick as fuck
stick the yz85 engine on a mini bike or go kart
Why the burnouts on dirt it's not powerful at all it's a predator
check out MacroMachines, Neves Projects or even T-Mans chanels you may learn something
ALRIGHT WHAT THE FUCK IS THE HEADPHONES
your fork is bent backward´s!
DON'T you dare hide that motor w panels.. Sponsor wont appreciate it much either.
Lucky Fawker plus, the engine is air cooled, needs to be open to prevent overheating.
Lucky Fawker not unless he put cowls on the front to direct air to the top end like a water cooled mx bike. I kinda dig the cafe racer look it has now tho so I vote minimal paneling if any.
7678 view
13
Its moor like a pit bike
What welder do you have?
it looks like a stunt bike
it looks like a stunt bike