First of all, thank you very much... It was a topic I've been wondering about for a long time. Do you have a site or social media account where we can see your work?
This is amazing! I built a tumbler after watching your video and now just have to figure out the painting and polishing. I spoke with Zeulch about buying there special tumbling paint but unfortunately I am in the USA and they do not ship here. I am considering using water based acrylic paint. Do you have a toy safe recommendation for a high gloss finishing coat? How do you polish the wood between coats?
Helleo,I would have a few questions. 1) ratio of paint and water 2) how much do you weave the paint into the dyeing drum 3) how painted wood dries without sticking together thanks
1) Don't know you must find out. That was first time with water based paint for me. And I add to much water in first time. 2) Even distribution of paint. This drum rotate only in one direction so there is no even mixing. Everything rotate around one axis. You should have tilting axe like in concrete mixer(that was my first painting drum) 3) They always stick more or les. Best are beads for minimum surface stick to another bead. But flat parts are nightmares. So let them littre dry mix of 10-20sec let dry for like 5-10min and next mix.
Will you please guide some more details regarding paint process.. i mean is there any need to add any media for painting flat surface wooden blocks. what are the addons need to add if two wooden blocks are sticked to each other. will you please guide to paint flat surface wooden blocks. Have you do PU coating after paint by using this technique.
I explained everything I know. For more details you must find paint dealer for this process. I hear there are some media for square elements. But never need that... or know about that in past(when I need it). www.zuelch.com/Products/Tumbling-lacquer-0007113353.html
hi, we painted rectangular and cube woods collectively in the drum. The products stuck together a lot and the surfaces became very rough. How can we solve the problem?
It was water base acrylic. Usual I don't use that but customer wants it so we made experiment. There are also special purpose lacquers for that www.zuelch.com/Products/Tumbling-lacquer-0007113353.html
hello, first of all thank you for the great video. I wonder if I can get information about how to proceed for flat pieces? flat parts have broken edges. I will be very happy if you help
No. First is long run till all elements are covered in paint. Next you made short runs like 30sec to 1min for prevent sticking together. You made that in like 10 min periods. Till all is dry enought to prevent sticking. Then you wait next day for cure the layer.
@@woodaddict1 You need find local paint dealer for this method. They have knowledge and can give better advice. Not round object are harder to paint there some addons and technology for that. ruclips.net/video/m9F-SJyHvxM/видео.html ruclips.net/video/nI4QSuJKKbE/видео.html ruclips.net/video/F0diEDTWEko/видео.html
Ahhh this work was annoying. We need to separate parts after painting. Also we spray paint molding slats before cutting to individual pieces. You cant paint in this method inside corners
Right amount of paint and luck. Spheres are easiest to paint for little surface stick to other sphere. Flat elements are harder, surface tension can glued them together before paint set. Sou you get big chunk. Ask local distributors for this painting method they have some additives and know tricks. ruclips.net/video/U3qCLeBsBn0/видео.html
It was water base acrylic. Usual I don't use that but customer wants it so we made experiment. There are also special purpose lacquers for that ruclips.net/video/nkOJc8K2yI0/видео.html&lc=UgzD0M8hZYobWLDuBMB4AaABAg.9MAXPmP2mQC9MBU02ntYiP
Its DIY i show parts on being. If you search something almost ready.... concrete mixer ruclips.net/video/fJoPNKF1HNw/видео.html There also professional equipment with octagonal container.
Наука
Thank you for sharing, very interesting. Beautiful parts!
very good.. i will try it for sure
Amazing! Now, do you sell beads privately (whole sale) or do you just sell to companies?
AMAZING! what kind of ink do you use?
Hello, very nice. congratulations
First of all, thank you very much... It was a topic I've been wondering about for a long time. Do you have a site or social media account where we can see your work?
This is amazing! I built a tumbler after watching your video and now just have to figure out the painting and polishing. I spoke with Zeulch about buying there special tumbling paint but unfortunately I am in the USA and they do not ship here. I am considering using water based acrylic paint. Do you have a toy safe recommendation for a high gloss finishing coat? How do you polish the wood between coats?
Did you ever get this all figured out? I tried a small scale version of this to no avail.
@@anthemcreations3523Hi there! And how was the result?
@@BoburKhayrullaevich It was pretty terrible. I couldn't figure it out. I tried.
No zajebiste.
A ja myślałem że takie rzeczy tylko w chinach robią.
Powodzenia w tym co działasz.
more of this pls
subscribed
Cool:)
Спасибо!
Do you know if this technique would work with a clear coat to achieve a high gloss finish? Really cool stuff!
Oh..... I forget that I mixed lacquer for that at morning...Need to back to work so I will made little video.
ruclips.net/video/fJoPNKF1HNw/видео.html
Hello, dear friend, I wanted to know if this painting method works for brush handles, and you use water-based polyurethane paint.
Towards the end of the video, you have shown some small wooden pieces. My question is, did you use the acrylic paint on those as well?
polyurethane www.astravernici.it/en/
Helleo,I would have a few questions. 1) ratio of paint and water 2) how much do you weave the paint into the dyeing drum 3) how painted wood dries without sticking together thanks
1) Don't know you must find out. That was first time with water based paint for me. And I add to much water in first time.
2) Even distribution of paint. This drum rotate only in one direction so there is no even mixing. Everything rotate around one axis. You should have tilting axe like in concrete mixer(that was my first painting drum)
3) They always stick more or les. Best are beads for minimum surface stick to another bead. But flat parts are nightmares.
So let them littre dry mix of 10-20sec let dry for like 5-10min and next mix.
@@artcraft2893 I have too problem
Will you please guide some more details regarding paint process..
i mean is there any need to add any media for painting flat surface wooden blocks.
what are the addons need to add if two wooden blocks are sticked to each other.
will you please guide to paint flat surface wooden blocks.
Have you do PU coating after paint by using this technique.
I explained everything I know. For more details you must find paint dealer for this process. I hear there are some media for square elements. But never need that... or know about that in past(when I need it). www.zuelch.com/Products/Tumbling-lacquer-0007113353.html
hi, we painted rectangular and cube woods collectively in the drum. The products stuck together a lot and the surfaces became very rough.
How can we solve the problem?
I too have this problem
Hello, do you need to make a separate drum for each color. Or can we use the same drum for different color?
Yes old color from tumbler wall can contaminate new color.
Thanks you so much for video, can you tell me please which type of paint you are using ???
It was water base acrylic. Usual I don't use that but customer wants it so we made experiment. There are also special purpose lacquers for that www.zuelch.com/Products/Tumbling-lacquer-0007113353.html
normalnie lotto zrobiłeś :)
hello, first of all thank you for the great video.
I wonder if I can get information about how to proceed for flat pieces?
flat parts have broken edges.
I will be very happy if you help
Its nightmare everything gets glued to tiny bit of flat surface.
@@artcraft2893
I don't quite understand, can you explain a little more?
can you make a video for this
please help me🙏🏻
Amei!
Is the tumbler turning continually as the part are drying?
No. First is long run till all elements are covered in paint. Next you made short runs like 30sec to 1min for prevent sticking together. You made that in like 10 min periods. Till all is dry enought to prevent sticking. Then you wait next day for cure the layer.
@@artcraft2893 thanks for your help and your video! Do you think this would work for wooden toy cars or is it best for round snaps?
@@woodaddict1 You need find local paint dealer for this method. They have knowledge and can give better advice. Not round object are harder to paint there some addons and technology for that.
ruclips.net/video/m9F-SJyHvxM/видео.html
ruclips.net/video/nI4QSuJKKbE/видео.html
ruclips.net/video/F0diEDTWEko/видео.html
Hi, Whether Tetris blocks can be painted by this method?
Ahhh this work was annoying. We need to separate parts after painting. Also we spray paint molding slats before cutting to individual pieces. You cant paint in this method inside corners
how do you do that ? teach me how
Can I use an additional heat source for a faster drying process?
Yes but that depends from paint and experience with that paint.
Dear sir want to more know about this process on tetris types wooden parts. Could you make another full video wtih color type discriptions.
It was nightmare, every flat surface is stick to other flat surface.
How do you make sure the pieces do not stick to each other?
Right amount of paint and luck. Spheres are easiest to paint for little surface stick to other sphere. Flat elements are harder, surface tension can glued them together before paint set. Sou you get big chunk. Ask local distributors for this painting method they have some additives and know tricks. ruclips.net/video/U3qCLeBsBn0/видео.html
@@artcraft2893 thank you very much
Which company products paint u are using the products
It was water base acrylic. Usual I don't use that but customer wants it so we made experiment. There are also special purpose lacquers for that ruclips.net/video/nkOJc8K2yI0/видео.html&lc=UgzD0M8hZYobWLDuBMB4AaABAg.9MAXPmP2mQC9MBU02ntYiP
What's the largest size (Dimensions or Weight) on can tumbler paint?
Don't know; is good for painting small items that can't by spray paint.
👏👏👏👏👍👍👍👍👍👍
From where we can purchase this tumbler, need for my clients. We manufacture water base non toxic toy paints in India . Thanks
Its DIY i show parts on being. If you search something almost ready.... concrete mixer ruclips.net/video/fJoPNKF1HNw/видео.html There also professional equipment with octagonal container.
Hello, what if there were no holes?
Worse ventilation, slower drying of the varnish. Industrial paint shop tumblers have air intake/outtake hose. ruclips.net/video/nI4QSuJKKbE/видео.html
Hi i really Whant to chatear with You, im from Nicaragua and i Whant to Know how do you do The woodballs can yo teach me?
ruclips.net/video/zeSSvJ_4U3U/видео.html
What type of paint is used?
Beckers Designer Universal Candy Pink
How can i get this machine ?
Without commentary I have no idea what you are doing and why you are doing it.
😊👏👏👏👍
Can you be hired to do this for me?
Hi..I'm newbie..
Which color brand or color liquid that u coat on wood?
I need
Hi