Off Grid DIY Steam Turbine Maintenance - Generator, Gears & Bearing Assembly
HTML-код
- Опубликовано: 4 май 2023
- Off Grid DIY Steam Turbine Maintenance - Generator, Gears & Bearing Assembly
To inquire about more information email me at TesTurEnergy@Gmail.com
Or if you would like to help bring Nikola Tesla’s Turbine to the people of the world go to my Patreon to aid the cause so we can make more prototypes and models!
www.Patreon.com/CharlieSolis
#NikolaTesla #TeslaTurbine #TesTurEnergy
NIKOLA TESLA BRITISH PATENT 186,082 - IMPROVEMENTS IN THE CONSTRUCTION OF STEAM AND GAS TURBINES
"In the new design I employ two heavier end-plates which are machined tapering toward the periphery for the purpose of reducing the maximum centrifugal stress as much as practicable. The inside discs, of relatively thin material, are rolled, forged or ground tapering in like manner and with the same object in view, but this may not always be necessary and plates, made of sheet metal of substantially uniform thickness as furnished by the mills, can be employed. Each of the thick as well as thin plates is provided with exhaust openings, leaving a solid central portion like the hub and spokes of a wheel. Star-washers of similar configuration serve the purpose of keeping the discs apart in the center and for the peripheral spacing the thin plates have small holes drilled in them on a circle, or circles, of suitable diameter, and in these are driven tight-fitting studs which are upset at both ends by a special tool so that they will project beyond the metal on each side a trifle more than the thickness of the star-washers. When the plates are put together the separating studs do not come in line but are straddled in order to give opportunity for slight yielding, thereby eliminating constructional difficulties which might be caused by unevenness or other mechanical imperfections. Thus the rotor can be finished closely to predetermined overall dimensions and will run true on the outside even if the thin inside plates should vary a little in thickness or be slightly warped. To simplify this arrangement I provide only every second plate with studs, using plain ones between. Furthermore, with the object of cheapening the manufacture I dispense altogether with the former, accomplishing the spacing by means of small bosses or protuberances which are raised in the plates by blows or pressure and provide a die, practically reducing all the machine work on a thin plate to a single operation in a stamping press. The star-washers, while preferable, are not indispensable and may be replaced by round separating washers of a diameter about equal to that of the hub part of the discs"
-NIKOLA TESLA
"This construction permits free expansion and contraction of each plate individually under the varying influence of heat and centrifugal force and possesses a number of other advantages which are of considerable practical moment. A larger active plate area and consequently more power is obtained for a given width, this improving efficiency. Warping is virtually eliminated and smaller side clearances may be used which results in diminished leakage and friction losses. The rotor is better adapted for dynamic balancing and through rubbing friction resists disturbing influences thereby insuring quieter running. For this reason and also because the discs are not rigidly joined it is safer against damage which might otherwise be caused by vibration or excessive speed"
-NIKOLA TESLA
Read full version:
A Better Way To Stack The Discs - Nikola Tesla's Upgraded Turbine Patent GB 186,082
• A Better Way To Stack ... 
Авто/Мото
I love it 🤩, designed to be long lasting and easily repaired by the average person. This product doesn’t exist to nickel and dime our customers.
“Planned Permanence” for the win!!
very interesting, I would like to see more of these turbines applied in everyday life.
Hey thanks for commenting!
With TesTur Energy, our mission is to give people energy independence through Combined Heat And Power (CHP) systems that can make use of underutilized energy sources like biomass, solar thermal, geothermal and even low grade fuels containing high quantities of solid particulates (like pulverized coal and powdered iron); energy sources/stores that are currently underutilized due to the lack of turbines and engines capable of handling the multiphase fluid flows (any combination of gasses, liquids, solid particulates) present in low grade heat boilers and low grade fuel sources without damage over prolonged/continuous periods of use.
www.TesTurEnergy.com
Let me know if you ever have any questions!
Much love!
❤
Just a quick note kilowatts does a chance if you go from 12/24v, only the amps do, I’m sure you know this it’s just a speech mistake. Have you tried motors directly half of the shaft with no gears yet some of those around cylindrical magnets you can get mount directly on the shaft? I know this video is quite old
AI deblur helped to see the patent. Wow. 😂
🔥🔥🔥
Would increasing the surface area of your "blades" make the whole assembly more efficient? Since you're using aluminum, I imagine anodizing would significantly increase the surface area of the faces of the discs.
Is there a way to have the turbine create its own vacuum
Hey thanks for commenting David!
So Tesla patented his GB 179,043: High Vacua Pump patent for the purposes of this.
Though it’s still meant to go after the condenser and be used for removing only incondensable gasses. The condenser provides all the vacuum that’s needed by condensing the gas and changing it’s volume dramatically through heat exchange.
This is why I have the second stage vacuum pump after the interstage heat exchanger in my Interstage heat exchanger dual stage design.
Tesla Turbine - InterStage Heat Exchanger (ISHE) - Heat Pump & Inverted Brayton Cycle Improvements
ruclips.net/video/pYSniitC8DM/видео.html
Love what you're doing little brother. I'll send you an email. I'd advise getting a private server. Google can read all Gmail. I know they ate youtube although you wantbto protect client info and discussion. Iceland maybe or private build.
Hey thanks for commenting! I’m excited to hear from you! ❤️🔥🙏
which kind of bearings you are using?
Hey Jose! Thanks for commenting! For now I’m just using typical off the shelf ball bearings. Nothing special.
Are those RCAs??? Coax??
Hey thanks for commenting. Um can you elaborate on that? Im not sure I follow 😅