2015 Dodge Durango Keyless Enter-N-Go not working

2015 Durango. The vehicle says “Service Keyless System” on startup. I had a friend with a good scanner and the code was B1A7513, which is Passive Entry Antenna 5-circuit open. I did some more digging and found out antenna 5 is in the rear cargo area right under the rear trim panel. I took out the rear cargo plastic tray and there was the antenna wiring harness-lying there,not plugged in. I plugged it back in and the system works like a charm.

[@nestorparra4653]

was this causing a key fob not detected message on the screen? mine won't even start and i'm thinking it could be this

[@dougs7044]

No but I saw a video that if you hold the key fob on the ignition button as you push it, it may start. I think I remember that could just be a dead battery in your key fob. Good luck!

[@nestorparra4653]

@@dougs7044 sadly not lol, brand new battery in my fob and i tried that trick but thanks for the reply.

[@zlosthero114]

​@nestorparra4653 did you find the issue,m mine doing the same thing but I can still drive it

[@nestorparra4653]

@@zlosthero114 took it to the dealer to get it scanned, ended up being a bad key fob, try a new key fob battery. unfortunately that didn't work for me the whole fob was bad

[@zlosthero114]

Dang yeah mine ia something else then, i replaced the battery, had 2 locksmiths come out and neother of them were able to get it. ​@nestorparra4653

[@lvn4jc625]

Where is the plug at. Can’t tell from video

[@dougs7044]

Pull up the rear plastic trim piece that has the metal latch for the hatch sticking up through it. There are just a few clips holding it on. Below that, at the very back, under the plastic piece that is still attached, you will see the small wiring harness. Make sure yours is plugged in. I saw another video that said they sometimes work themselves loose.

[@dougs7044]

This guy shows you where it’s at. He’s the one who put me onto the right track. ruclips.net/video/FQ-qRE2VClo/видео.html