Thank you Casey! :) I appreciate the kind words my friend. Yeah, it's actually more rare than I first thought. Hard to find this body style. Thanks for stopping by :)
Love this Cornbinder, Zane! Lots of potential and options are wide open. All that space! As long as the basic structure is sound, you can go with a more updated engine and drivetrain. Or just keep her original. Either way, I'm looking forward to seeing more of this beast!
Something so therapeutic about getting the grinder or sawzall to cut out something that's been holding you up! I had to cut my bench seat up to get it out too
it's a runner, was working on my 66 international yesterday, lost the spark I think my condenser must be bad may get some parts today can't wait to see your truck moving 👍
I’ve got a BCF-182 I think these lines of trucks are the best looking, mine is same front end just radiator shutters and has the rare Select O matic 5 speed
After the video’s over I’m gonna head down to my local tractor supply and get me one of those battery tow downs🤣😂! Ripping off that headliner I can get a good look at how bad the roof is (looks like Swiss cheese LOL), and watching you rip out that seat was hilarious🤣! That engine looked pretty rough but it was awesome to hear it run. Just goes to show these older engines were built to last. Great video Zane I really enjoyed it!👍😃
Lol! 😂 Swiss cheese indeed Cody! Had to remove the headliner *slowly* ....kept checking for spiders 😂🥺. Thanks for tuning in. Its always much appreciated my friend 🙂❤
Looks like your projects are doing better than mine! 😂 hopefully some parts show up for my F600 4x4 this week. I'd like to get it mobile again before snow flies!
Zane, I have allergies issues too, believe it or not, if I have a headache I will put some vicks vapor rub on the area where it hurts. ..tell you what, if we lived near each other I guarantee we would be buddies, we have alot of identical interest....hope this helps!! God Bless!!!
I know where a later model IH is (maybe mid 70's) but have never stopped to see if it could be bought. It is 4X4 too. I think it has a V8 in it. Going to take a lot of work but that is going to be a neat old truck...
There's hope for the ol girl yet, if you pull the drive shaft you're gonna want to put something in there to stop the transmission oil from spilling out, do you know that the clutch is releasing? or cross that bridge when you come to it
Thanks for the comment and suggestion James 🙂👍 both of the flanges are bolted on. I believe the clutch is free 👍 hopefully it will move under it's own power. Thanks for watching and take care
That engine sounds really good. From the cans of brake fluid in the cab, I'm guessing the truck might have had a brake issue when it was still in use...
Thanks! 😀👍 yeah, im lucky it seems to run good. I was wondering the same thing about the brake fluid lol. Thanks for the view and kind comment 🙂 much appreciated
The way this truck has been repaired over the years, tells me it has spend a lot of its working life in very remote locations where parts were not easy to come by. Just out of curiosity where do you source parts for these old trucks? ..I can imagine them being difficult to find parts for
I would imagine you're 100% correct on that! I'm sure its had a rough life. So far the parts have been fairly easy to get 🙂👍 just a lot of research and some guessing. Thanks for the view and comment. Take care 👍
The rear end in my dad's dodge dually is making a growling sound at lower speeds and it vibrates at high speeds. It's a Dana 80 with 3.55 gears. We are thinking the pinion bearings are going out and the ring and pinion are shot. So it probably needs the rear end rebuilt or has to have a new rear end put under it. Do you think the rear axle from a 2003 chevy 3500 work under a 2000 dodge ram 3500?
Good video! 🤔 all those straps and they use twine for a battery tie-down??? You can still get Big Red in a can, LOL and I understand what you're getting at about a 350 in S10... But you do realize it's no harder to get the spark plugs out of a 4.3 that came Factory in the S10, right? As a 4.3 is just a 350 with the front cylinders cut off... So it's not pushing the engine back any further is just pulling it outward, toward the radiator. Otherwise it's the exact same blocked just two front cylinders cut off.
I didn't think of that! 😂 so much for the straps lol. Thats true about the 4.3 🙂👍 thanks for the view and kind comment Justin. I truly appreciate that my friend 👍
At least it popped off, a carb kit should have it running good Zane! Its amazing how long that old iron lasts. I didn't see the fire extinguisher there when you were trying to start it!
Oh yeah JT 😣 I've done better work. The passenger side of the seat frame was bolted with no gap to get the blade in between the frame and slider. What a mess. Thanks for watching 👍🙂 take care
@@HODGEPODGEDODGEGARAGE it's a 4x4. It has a bad case of death wobble though. Get it above 35 and it shakes violently. I told him he might but some money into the front end after he gets the kinks worked out of the engine
And zane my grandma died the same date that my grams sister died I never met my grandpa so all y'all out there who have grandmas and grandpas be blessed and go tell them right now that you love them you never know how much time you have 😥
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
FIRST
Thanks Scott 🙂👍
No iT's FiRsT
@@tinoswrld LaSt
@@oldcroneysgarage9739 LoL
Awesome old IH. Love it.
Thanks for the kind words Jacob! 😁👍
The old cornbinder comes back to life.
Oh yes! 😀👍 thanks for the view and kind comment. Take care
First starts are always fun. cool truck
Thanks! 🙂👍 I appreciate that my friend. I thoroughly enjoy your content as well. Take care 👍
Yea it started!!!!! Glad you are feeling better.
Oh yeah, luckily it started easily 🙂👍 thanks for that Kyle. I appreciate the kind words my friend ♥
@@HODGEPODGEDODGEGARAGE your welcome Zane!!! Reminds me of Johnathan from NC he always gets them going too. 🙌👍👊
@@kylebass4635 Oh, now I really appreciate being compared to my YT *idol* ! 😀 I don't think anyone beats him though 👍
@@HODGEPODGEDODGEGARAGE Your welcome; he has what we call spearence 🤣😅😂
Love the old iron Zane
Thank you Dennis! 😀👍 I truly appreciate the kind words. Take care 👍
That spidery rear glass very trippy looking.
🤔 Now that you mention that, it sure is crazy looking 😂. Thanks for the view Paul 🙂👍
Can't wait for your next video Zane!!
Thanks John! 😀👍 I appreciate the kind words of encouragement. Take care
Don’t know how I missed this video but I saw it ! And checked bell notifications ! And we’re good ! Can’t wait for more from Zane !
Thanks for that David! 🙂👍 It helps me out tremendously on here. I'm hoping to have a video out soon. Take care and I'll talk to you later my friend 🔧
Nice to hear that run !!!
Thank you 😀👍 im glad it finally started up also
your giveing me the bug to go out to the barn and start one of our model A fords. keep up the good work.
Thanks Badger Bob! 😀👍 Oh yeah, start 'er up!
Looks like structural floor mats. I've got a few of those...
lol! Thats the truth Wes! 😂 Thanks for watching my friend 🙂👍
those links may have been for a salt / cinder spreader feed in the bottom of a dump bed. congrats on the first start! look forward to the next part!
So.... You offering to do that RollBack? lol ;
Thanks J.C! 🙂👍 I appreciate the kind words my friend
What a cool old 4x4 truck. Definitely hard to find those.
Thank you Casey! :) I appreciate the kind words my friend. Yeah, it's actually more rare than I first thought. Hard to find this body style. Thanks for stopping by :)
Thanks Zane, enjoying the docu-series on the AC-170!
Thank you Ryan! 😀 I truly appreciate the kind words of encouragement 🙂👍 take care
Excellent video !
Thank you Andrew 🙂👍 I appreciate the view and kind words
Welcome
Sawsall, the ultimate precision alignment tool! LOL!
Oh yes Kevin! 😂 it gets the job done. Thanks for the view 🙂👍
Nice truck sir
Thanks for the view and kind words 😀👍 I really appreciate that. Take care
The ultimate dog tease 🤣🤣 I haven't seen that in years
Glad I could make you laugh Seth! 😂👍
looking good Zane glad you were able to start it
Thanks Greg 🙂👍 I appreciate the kind words my friend. Take care 👍
You got the cool stuff too! I'll be tuning in more often. Thanks Bro.
Hey, thank you! 😀👍 I appreciate the kind words. Take care
Love this Cornbinder, Zane! Lots of potential and options are wide open. All that space! As long as the basic structure is sound, you can go with a more updated engine and drivetrain. Or just keep her original. Either way, I'm looking forward to seeing more of this beast!
Thank you Wes! 😀 I truly appreciate the kind words my friend. Its definitely a neat old binder 🙂👍 take care and be safe
Nice work, and an interesting truck project
Thanks for the kind words of encouragement Dave! 🙂👍 Much appreciated
Old truck starts up.👍
Oh yeah, I got lucky Brian 😀👍 thanks for the view
Something so therapeutic about getting the grinder or sawzall to cut out something that's been holding you up! I had to cut my bench seat up to get it out too
Oh yeah Bennett 😀👍 its kinda fun once in a while. Thatnks for the view and comment. Take care my friend 👍
it's a runner, was working on my 66 international yesterday, lost the spark I think my condenser must be bad may get some parts today can't wait to see your truck moving 👍
Thanks Bill 🙂👍 hopefully your problem is something simple. Take care 👍
another great video!
I agree, see if it will run at all before spending time/money on the carb.
Thank you 🙂👍 I appreciate the kind words. Take care my friend
Good video bud
Thanks Clayton 🙂👍 I appreciate that my friend 👍
I’ve got a BCF-182 I think these lines of trucks are the best looking, mine is same front end just radiator shutters and has the rare Select O matic 5 speed
Oh nice Jacob! 😀👍 that's cool. This body style is odd looking for sure. Thanks for watching and for the kind comment my friend. Take care 🔧
After the video’s over I’m gonna head down to my local tractor supply and get me one of those battery tow downs🤣😂! Ripping off that headliner I can get a good look at how bad the roof is (looks like Swiss cheese LOL), and watching you rip out that seat was hilarious🤣!
That engine looked pretty rough but it was awesome to hear it run. Just goes to show these older engines were built to last. Great video Zane I really enjoyed it!👍😃
Lol! 😂 Swiss cheese indeed Cody! Had to remove the headliner *slowly* ....kept checking for spiders 😂🥺. Thanks for tuning in. Its always much appreciated my friend 🙂❤
Cadillac on the go pedal
Thank you Ron! 🙂👍 I appreciate the information my friend
Looks like your projects are doing better than mine! 😂 hopefully some parts show up for my F600 4x4 this week. I'd like to get it mobile again before snow flies!
Thanks Wesley 🙂👍 I hope you get some parts soon too. Shipping is *grueling* anymore 😔
Zane, I have allergies issues too, believe it or not, if I have a headache I will put some vicks vapor rub on the area where it hurts. ..tell you what, if we lived near each other I guarantee we would be buddies, we have alot of identical interest....hope this helps!! God Bless!!!
Oh we would for sure! :) Great idea on the Vicks. I will have to try that! I hope you're having a good weekend so far. take care and God bless!
I know where a later model IH is (maybe mid 70's) but have never stopped to see if it could be bought. It is 4X4 too. I think it has a V8 in it. Going to take a lot of work but that is going to be a neat old truck...
*Awesome* Johnny! 😀 you should see if it's for sale. Thanks for the view and kind comment 🙂👍 take care
Good old baler twine worked for a lot of things, sorta like modern day duct tape.
You got that right Ken 🙂👍 thanks for the view and kind comment 👍
There's hope for the ol girl yet, if you pull the drive shaft you're gonna want to put something in there to stop the transmission oil from spilling out, do you know that the clutch is releasing? or cross that bridge when you come to it
Thanks for the comment and suggestion James 🙂👍 both of the flanges are bolted on. I believe the clutch is free 👍 hopefully it will move under it's own power. Thanks for watching and take care
That engine sounds really good. From the cans of brake fluid in the cab, I'm guessing the truck might have had a brake issue when it was still in use...
Thanks! 😀👍 yeah, im lucky it seems to run good. I was wondering the same thing about the brake fluid lol. Thanks for the view and kind comment 🙂 much appreciated
FaNtAsTiC ZaNe
Thanks Tino! 🙂👍
Looks like another awesome project, also you’ll get better fuel mileage with front wheel drive.... take care
Thanks Stacen! 😀 oh yes FWD mode will save some fuel 😂 Thanks for watching and be safe 🙂👍
I love these old trucks. Lemme know what your gonna do with the engine, if you want to sell it.
Thanks Jeremy! 😀 I plan on keeping the engine in this truck but if plans change, I will let you know. Thanks for the view and kind comment 👍🙂
Cool truck I think I would find a better cab for it. Load star cabs are nice.....
Its really not as bad as it looks 🙂👍 I just recently found one to use. Hopefully it works out as well as I'm hoping. Thanks for watching 🔧
Give the old girl a good power wash!
Oh yes JB! 🙂👍 hopefully soon. Thanks for the view and kind comment 😀
The way this truck has been repaired over the years, tells me it has spend a lot of its working life in very remote locations where parts were not easy to come by.
Just out of curiosity where do you source parts for these old trucks? ..I can imagine them being difficult to find parts for
I would imagine you're 100% correct on that! I'm sure its had a rough life. So far the parts have been fairly easy to get 🙂👍 just a lot of research and some guessing. Thanks for the view and comment. Take care 👍
The rear end in my dad's dodge dually is making a growling sound at lower speeds and it vibrates at high speeds. It's a Dana 80 with 3.55 gears. We are thinking the pinion bearings are going out and the ring and pinion are shot. So it probably needs the rear end rebuilt or has to have a new rear end put under it. Do you think the rear axle from a 2003 chevy 3500 work under a 2000 dodge ram 3500?
I'm not sure, it may work 🤔
depends on spring spacing. The mounts might have to be moved.
Are you sure it's a Dana 80 & not an AAM rear axle? Just rebuild what you have. You'll save yourself a headache down the road.
also the ujoints could be different size.
@@WesleyJohnsonMI yeah it's a Dana 80.
An IH 350 V8 from an early 70's truck of a similar model might swap into yours and not have the firewall space problem.
Thanks for the info! 😀 Always good to know of options. Take care 👍
Good video! 🤔 all those straps and they use twine for a battery tie-down??? You can still get Big Red in a can, LOL and I understand what you're getting at about a 350 in S10... But you do realize it's no harder to get the spark plugs out of a 4.3 that came Factory in the S10, right? As a 4.3 is just a 350 with the front cylinders cut off... So it's not pushing the engine back any further is just pulling it outward, toward the radiator. Otherwise it's the exact same blocked just two front cylinders cut off.
I didn't think of that! 😂 so much for the straps lol. Thats true about the 4.3 🙂👍 thanks for the view and kind comment Justin. I truly appreciate that my friend 👍
Like #535
Thanks for the video!
Thank you Dan! 😀👍 I truly appreciate that my friend
I know what you mean about the heat. That’s good progress at least it does start. Are you going to clean the tank?
Oh yeah, I'm glad it starts. Yeah, I'll remove the tank and clean it the best I can. Thanks for tuning in Kevin 🙂👍 much appreciated my friend
👍👍
Thanks Tom 🙂👍 I appreciate you stopping by
You mentioned tech school. What did you go for?
Collision Repair 🙂👍
@@HODGEPODGEDODGEGARAGE so repairing the roof won't be a problem.
@@dans_Learning_Curve shouldn't be an issue 🙂👍
Zane I have a question about my Tao Tao there is this weird drainage hose what If I'm driving and it starts draining gas? 🤷♂️
Oh I'm not sure buddy 🤔 I've never had a quad
At least it popped off, a carb kit should have it running good Zane! Its amazing how long that old iron lasts. I didn't see the fire extinguisher there when you were trying to start it!
🤣 The extinguisher was *close* Jason! You can count on that 😂
Really bad call on the seat removal. Not your finest moment.
Glad it fired. Set up a gravity feed tank.
Thanks for sharing.
Oh yeah JT 😣 I've done better work. The passenger side of the seat frame was bolted with no gap to get the blade in between the frame and slider. What a mess. Thanks for watching 👍🙂 take care
Where can I buy that fancy battery hold down? 😂
Tractor supply! 🤣🤣
This isn't real, the battery tray isn't rusted away ! Only joking ! Keep up the good work.
Lol 😂 Its pretty surprising that the tray is intact. Thanks for the view and kind comment 🙂👍 its much appreciated my friend
My buddy got a new truck. It's a 2001 dodge ram 2500 5.9 liter
Magnum
Nice Scott 🙂👍
@@HODGEPODGEDODGEGARAGE I asked him. "Why isn't it a Cummins?" But it is a good truck. He said if he was to do a Cummins he would do a 12 valve
@@oldcroneysgarage9739 nothing wrong with the 5.9 gas :) is it 2wd or 4x4?
@@HODGEPODGEDODGEGARAGE it's a 4x4. It has a bad case of death wobble though. Get it above 35 and it shakes violently. I told him he might but some money into the front end after he gets the kinks worked out of the engine
@@oldcroneysgarage9739 thats true. Second gens are notorious for death wobble 😬
Engine cover. I always heard it being called the dog house
True! 🙂 Thanks for the view and kind comment John. Its much appreciated 👍
Now would be the time to put in a sun roof.
That's no joke! 😂 Thanks for the view and funny comment. Take care Ray
Zane I REALLY wish we could meet in person but ur in missouri and I'm in pennsylvania 🙁
Quite a few miles from one another buddy. Get that quad running yet?
And zane my grandma died the same date that my grams sister died I never met my grandpa so all y'all out there who have grandmas and grandpas be blessed and go tell them right now that you love them you never know how much time you have 😥
I'm sorry for your loss Tino 😢
@@HODGEPODGEDODGEGARAGE it's ok