Great build. There’s nothing more satisfying than making your own tools and then being able to put them to work making beautiful things. By the way where did you get your steel for that?
not very. i tryed so. Rounded edge made skew effectivlei bigger, than it really is. As the skew is big and heavy itself, it become even more stable AND get some advantage from having a long edge (thick skew cuts not so well, but thick skew witl longer edge is better) sumpthing like that ^-)))) btw huge skew easy replaces a roughing gauge, and a lot more simple to make.
Очешуенный способ делать хвостовик. Просто и эффективно. Сделай на реальном хвостовике волнообразные насечки еще, чтоб он собственно цеплялся за металл. Так раньше делали из эпоксидной смолы рукояти к ножам
You mean the liquid used to cool the steel? It's engine oil. Use oil because water may cause cracks. Engine oil or vegetable oil is also used. Thanks for watching. Have a nice day.
I used 6T steel. Quenching, but the sharpness of the knife didn't last long. If you make it, I'd like to recommend HSS(high speed steel) rather than steel. Thanks for watching. Have a good day.😀👍
As far as I know, metal file material is carbon tool steel. Many people make knives and chisels with metal files and use them. Without High Speed Steel, carbon tool strength would be a good choice. If you get annealing while you make it, you should be good at quenching as you know. I hope you make a good lathe tool. Be careful not to get hurt, and have a good day.👍😀
ruclips.net/video/istT2TVr_QU/видео.html Это коротко, но вы можете увидеть это от 4 минут и 18 секунд. Я буду загружать видео снова в следующий раз. Спасибо за просмотр.
У меня давно такой есть работает хорошо и прямые косяки ест штук шесть точно но полукруглый в некоторых случиях просто не заменим его не подхватывает просто надо поработать я тоже у видил у одного американца хотя ничего не понял не знаю английского но он хорошо паказывал без языка понятно
Looks great as usual!!!
Nice build but was hoping to see how it cut
Beautiful. I’d buy it.
Very good
Nice work! Beautiful tool!
nice work.. is that counstruction steel?
Great build. There’s nothing more satisfying than making your own tools and then being able to put them to work making beautiful things. By the way where did you get your steel for that?
You might like to know, that leaf springs from commercial vehicles, are are very good for making wood-turning tools.
Thank you 👍
Thank you for showing us. It seems a round nose skew doesn't catch like a standard design?
not very. i tryed so. Rounded edge made skew effectivlei bigger, than it really is. As the skew is big and heavy itself, it become even more stable AND get some advantage from having a long edge (thick skew cuts not so well, but thick skew witl longer edge is better)
sumpthing like that ^-))))
btw huge skew easy replaces a roughing gauge, and a lot more simple to make.
Very nice work 👍
What sort of steel was it?
What is the two stuff you put on wood on lathe (first on cloth and second in form of quad stick)?
Nice job
Очешуенный способ делать хвостовик. Просто и эффективно.
Сделай на реальном хвостовике волнообразные насечки еще, чтоб он собственно цеплялся за металл. Так раньше делали из эпоксидной смолы рукояти к ножам
What was that black stuff you put the steel in?
You mean the liquid used to cool the steel? It's engine oil. Use oil because water may cause cracks. Engine oil or vegetable oil is also used.
Thanks for watching. Have a nice day.
VERY GOOD.
Thank you.
Nice work👍how it cut?
Что за сталь?
Поперек лучше не варить, подкаливается. Может отломится в процессе работы
Qué medida tiene el acero que quedó?
Gud job man what kind of metal you are dealing with pls thanx
I used 6T steel. Quenching, but the sharpness of the knife didn't last long.
If you make it, I'd like to recommend HSS(high speed steel) rather than steel.
Thanks for watching. Have a good day.😀👍
Thanks man
It seems like it was not hot enough while quench
Do you think metal files gud for lathe tools
I'm beginner 😄
As far as I know, metal file material is carbon tool steel. Many people make knives and chisels with metal files and use them. Without High Speed Steel, carbon tool strength would be a good choice. If you get annealing while you make it, you should be good at quenching as you know.
I hope you make a good lathe tool.
Be careful not to get hurt, and have a good day.👍😀
Thanks man for advice
What was the steel. Nice work!
Carbon steel (6T). Thank you for watching.
По искре явно не HSS
Ok yes
ты б хоть разок показал как твои инструменты работают
ruclips.net/video/istT2TVr_QU/видео.html
Это коротко, но вы можете увидеть это от 4 минут и 18 секунд.
Я буду загружать видео снова в следующий раз.
Спасибо за просмотр.
У меня давно такой есть работает хорошо и прямые косяки ест штук шесть точно но полукруглый в некоторых случиях просто не заменим его не подхватывает просто надо поработать я тоже у видил у одного американца хотя ничего не понял не знаю английского но он хорошо паказывал без языка понятно
You never annealed the steel.
Thank you for your valuable advice and thank you for watching.