Greetings from Bahrain. I have 2013 xc70 and I like your channel so much. I appreciate your commitment and dedication to capture DIY upgrades you have to your sweet Volvo. I had tailgate module, Trunk new module and in middle of the interior LED light installation. Thumbs up and have a great weekend.
I have volvo s80 t5 2012 and wanted to install 2014 dashboard display what shall i do? Shall i just put it there or need to update the software and add more wires or what ?
Did it few weeks ago on my S80 2.4D 2010. Decoding the CEM took 18hrs and for some reason it did not work out at the first time so I had to do it again. Price in Vdash at the time was 199€. Very good and extremely helpful video, thank you for making it!
I I really enjoy and appreciate your videos. Having just purchased a 2011 S80, I will be using your videos for service, cleaning and upgrading. Thank you
I am seriously toying with the idea to do this to my P3 V70 but I need to get Vida and dice along with the TFT so it’s not cheap to do this and then I have to fit it and hope I can make it work properly.
Nice video. The 2 wires from OBD to the display. Are they needed? Or what do they actually do? Installed the TFT display without the 2 wires and it seems to work just fine. Fuel gauge is not correct, but I haven't gone for a test drive yet.
When you say "twisted wire pair, do you mean, soldering a long piece of wire to the red volvo terminal cables, and then twisting the wires coming off that down to the OBD wires? Just a bit confused there.
Are you supposed to connect the negative clamp to the negative terminal? I've seen elsewhere that you're supposed to connect it to unpainted metal away from the positive terminal to make sure you don't cause a fire from the fumes or something. He shows it connected to the negative terminal so I'm just confused on which way is the proper way.
Your videos are absolutely brilliant, really great video shots with mounted camera, always clear to see exactly what you are doing, with very clear instructions! Top marks! Thanks for sharing 👍
I always watch your videos and find them very entertaining and educational. I wanted to ask you if you have installed Android car or apple car in your Volvo? Greetings from Chile 
Great video and great upgrade , but for me I’d trade my car in for newer model with this type of dash as std . However not that important to me so I’ll keep the old fashion version ! Like I say 10 out of ten for the effort and skill shown here . Another great vid by this chap
Hi. I have seen a couple of other videos where people have just plugged in the new cluster and not changed the software and some things don’t work. Does absolutely everything work in this for you, including the eco gauge on eco mode? Do you have a video showing every function working? Thank you.
Hi : Thanks for all your videos 🙂 Doesn't matter here what is motor code or gearbox code ? Also I have navigation screen in my volvo but without touch screen or car play... can I upgrade to touch screen ? My from 2012 D5 THANKS 🙂
Thanks for the interesting video. I have a 2007 Volvo S80 and would like to install the newer analog display. Can I just swap that in or do I need the software for that as well?
Very Good video. I follow all the instructions and it is working but the only think is that the speedometer is in miles (like it supposed to be because I am in US) but the odometer shows in kilometers. And I ask the people from d5t5 to help me fix that, but I guess they are too busy. You probably know. Or you may tell me how can I reverse so I can put the old cluster back. I did try to go back and install the old cluster but it didn’t give me the option. Thank you. I hope you can help me. All your videos are really helpful.
Hello, I know this is an old post but will like to know if your TFT works fine and what is/are the limitations and your odometer readings, was it affected by the dim change? How do you change/correct the time and reset service light after the retrofit?
@@oohjeriHi. It works just fine. The time can be changed by using VDash app on a windows pc (it's done automatically when you connect to your car through the ODB port), the service light can be reset in the menu or with some combination of buttons, don't remeber which. The limitations are listed in the How to article listed in this video description. (the eco meter is not showing anything and the power meter on the red theme does not indicate the real power level just something that has to do with the rpm or something like that).
Did this to my 2012 S60-R with a 2016 S60 TFT. I just added 2 wire, i didn't need vidaduce or VDASH. Everything is working except for the power level gauge.
Did on mine, now I have DIM error no DIM detected... but the replacement works. It looks amazing but I do not know if I will keep it because I cannot reset the clock or maintenance so it tells me every time I start the car that maintenance is overdue... when it is not. 2011 S80.
I have xc60, 2009. Do you know does it work on my car, so i can go to shoping parts🙂, and whether it shows when the light bulb stops working and the like, i didn't understand it best, also when the door is open does it show on display. Like your videos very much, thank you.
Seriously, I was expecting to see the final result for a while longer....and see the changes with before/after comparison, for people who doesn't know those models.
Very nice Video! I see that CEM decoding takes some times for P3. Is that same as SPA/CMA platform. If so, is there any way to improve decoding process.
Love the idea of the upgrade and would consider it if it were perfect afterwards. Sadly the compromises are to much for me. For the money to invest into this I'd like it to be fully functional.
What are the costs after unlocking the CEM? I know you said the price might change, but the website says nothing about this all. I am looking to do this upgrade, but don't want to do all the work and buy the unit to then discover a huge amount of money to do the upgrade
I'm interested in buying a 2007 v50 t5 ( P1 platform ) in good condition, there are some for sale here. And i want to upgrade to the digital panel on it. Its possible? Congratulations on the content Hugs from Sao Paulo Brazil
Hello my frind, great videos, I have one quetios, I have a volvo xc60 D5 2010 planning to updrade the virtual display, which year should select ? and do you have the link where to buy it
Is there anyway to contact you? I am from Winnipeg and would like more information about the Volvo programming..I would rather just pay you to enable some stuff
Hello, thanks for all your effort and work you put into making these videos! Can you please give us the link to the Chinese Dice clone that you bought? There are many to choose from on Aliexpress, I would like to have a link for a tried and working one. Thanks
why do you need to remove the wires if you give the old counter back? I have already wired the old counter that is in use, I already have a new counter in the garage ... dice comes in 14 days .... but the car works without problems with these wires (xc70 MY12)
@@Andysanche the worst part is my fuel gauge worked on the new tft BEFORE I installed their software. $139 US LATER and no fuel gauge. No response to requests for support.
Guys and Gals. I have to retract my earlier comment. It took awhile, but I think Pavel works solo so understandable, but he did get back to me with a fix on the software side which worked!! I guess my experience is the rarity. usually this TFT replacement procedure works on the first go without a hitch. But either way, D5T5 followed up and made it work! Super happy, Pavel is awesome. Highly recommend doing this........
What where the steps like in the tft software? Is the old cluster the most time consuming part, that cracks the cem, is that before step 4? Does the dim code go away when complete? Is the new tft loaded after step 4, is it a long process, did u get a message once or twice about a volvo dealership and getting locked out due to using unsanctioned hardware?
There is something else that can happen. After everything is insalled properly, the car might not start. It says immobilizer active. The only way to get the car to start is to put the old dim in, start the car and then switch the dim again while the car is started. Problem fixed. Did it on my S80 V8.
Hi how are you,, question is D5T5 is like vivda from volvo, can I use this Instead of Vida, I want to thank you for your help on all your post on RUclips
Thanks again Yuri for sharing this amazing video. I was also planning to install a digital cluster. Your video will help a lot. What's the green button on the left side of your steering House?
Hi, beforehand many thanks for your videos....i have a question, i did the installation but for any reason, the DSC control is out of service...i try to activate it but the check dissapear 1 second after the activation...i'd like to know if you know what is the reason of thisd issue.. i appreciate your help in this matter
Electronics related question: If I change the light switch from a 2011 S60 to one with "Auto" position (from facelift models), will the "Auto" function work out of the box, without any other wiring or software? Thank you!
2011 didn't have dedicated DRL so it would do nothing even if the auto worked. I once swapped an "Auto" switch from a 2014 V60 to my 2008 XC70 to see if it activates foglights as DRL like on new XC70s, nothing happened, low beam in all three positions (0, Auto, Low beam).
@@johannessoonik1007 Yes, I'd be expecting DRL lights not to work (as I don't have any), but since on "0" I have low beams turned OFF, I'd expect them to come ON in low light, as the car has a light sensor near the City Safety camera. Also, on V40 models, when driving in shade or cloudy weather with "Auto", the parking lights switch ON in order to have the the tail lights light up and more visible. So on "Auto" I'd expect OFF lights in daylight; ON parking lights in shade / woods / sunset, and ON low beam in low light.
Great video, followed it & upgraded my XC60 to the TFT dash. Could you do a halogen H/Lamp to Bi-Xenon upgrade using the V-DASH. I’m giving it a go but not sure I’m doing it right 🤔
@@JackMoynihanOfficial Ah ok, fair enough. D5T5 state it’s possible but it didn’t work when running the software. I’ve just learnt to live with halogen now. But it’s a shame all the same. Many thanks 🙏
@@viperx220racing3 yes there are writeups for how to do it on the P3 V70, the harness has different pins on the xenon models to power the ballast and other wiring things inside the headlight. The software changes only enable the active bending lights if the correct hardware is installed on the suspension of the car. Check Swedespeed
I have a Volvo V70 B Diesel 2009. The front left headlight pop up washing has broken. I would appreciate it if you had a video showing how to replace this. Any chance please?
I just tried to crack my ECU on my P3 S60, and there must have been an update because every time I walked away or shut my hotspot off, VDASH had an issue
Question about Volvo dice, can I also use other alternatives or it has to be the one you've got (even it is Chinese knock off) as I have seen other devices however, I am not sure if it will be good to use?
Thanks for all you do. I prefer reading instructions over watching videos. But you are a massive exception!
Thx so much Bert. My Starbucks coffee tomorrow guaranteed :)
Greetings from Bahrain. I have 2013 xc70 and I like your channel so much.
I appreciate your commitment and dedication to capture DIY upgrades you have to your sweet Volvo.
I had tailgate module, Trunk new module and in middle of the interior LED light installation.
Thumbs up and have a great weekend.
I have volvo s80 t5 2012 and wanted to install 2014 dashboard display what shall i do? Shall i just put it there or need to update the software and add more wires or what ?
Did it few weeks ago on my S80 2.4D 2010. Decoding the CEM took 18hrs and for some reason it did not work out at the first time so I had to do it again.
Price in Vdash at the time was 199€. Very good and extremely helpful video, thank you for making it!
I I really enjoy and appreciate your videos. Having just purchased a 2011 S80, I will be using your videos for service, cleaning and upgrading. Thank you
Nice video👍🏼
Greetins from Volvoland Sweden
So nice to finally see a video from you! Great that you show everything here👍
I am considering getting a 2013 t6 and I definitely would want to do this modification it looks so good
I’m wondering to see you change the suspensions on a Four-C D5. Thanks for your sharing works. It’s a real good job
Amazing guide, easy to follow. The best tip were the nosepicker, to put the pin into the connector. 😊
Will have to add this one to the "to do" list. Thanks mate.
Thanks from BRAZIL 🇧🇷!
Would love to do this on my V70 T6 AWD 2010 but I would never dare 😅 Excellent video 👌🏻👌🏻
I am seriously toying with the idea to do this to my P3 V70 but I need to get Vida and dice along with the TFT so it’s not cheap to do this and then I have to fit it and hope I can make it work properly.
Im amazed. Awesome work. A lot of time went in figuring out how to do this I suppose
The CEM decode on my S80 only took 3 minutes! I guess I was one of the lucky ones, haha
how do you like the new cluster?
How much was it
ZNormT6
How much was the cost?
Enduro Crosser the cost for what?
ZNormT6
For the decoding.
Nice video. The 2 wires from OBD to the display. Are they needed? Or what do they actually do? Installed the TFT display without the 2 wires and it seems to work just fine. Fuel gauge is not correct, but I haven't gone for a test drive yet.
hello, when you installed new cluster, have you used the same OBD device or have you used different one or (if you know) can I use wireless OBD?
Great tutorial!!!!
Easy to follow. Thanks.
Amazing video man! You help people a lot.
Excellent , spasiba !!
When you say "twisted wire pair, do you mean, soldering a long piece of wire to the red volvo terminal cables, and then twisting the wires coming off that down to the OBD wires? Just a bit confused there.
Very Nice and usefull video!! Thank you!!
What was the price of the software you had to buy for the TFT ?.
Yes, Im curious as well, how much ? €€
Great video, I am currently doing the upgrade.
Can I ask that you do a video installing the driving / Spot lamps you have fitted . Regards Bob
Are you supposed to connect the negative clamp to the negative terminal? I've seen elsewhere that you're supposed to connect it to unpainted metal away from the positive terminal to make sure you don't cause a fire from the fumes or something. He shows it connected to the negative terminal so I'm just confused on which way is the proper way.
Hi there, did you ever find out?
Your videos are absolutely brilliant, really great video shots with mounted camera, always clear to see exactly what you are doing, with very clear instructions! Top marks! Thanks for sharing 👍
Thanks for the feedback
is that twisted wire really important to work? did you try to use normal wire too? thank you
Vdash seems to be the only way to add heated seats to my 2009 XC90 V8 RD.
I always watch your videos and find them very entertaining and educational. I wanted to ask you if you have installed Android car or apple car in your Volvo? Greetings from Chile

Great video and great upgrade , but for me I’d trade my car in for newer model with this type of dash as std . However not that important to me so I’ll keep the old fashion version ! Like I say 10 out of ten for the effort and skill shown here . Another great vid by this chap
It's definitely a personal choice. With my milage there is no reason to get rid of my XC70.
Hi. I have seen a couple of other videos where people have just plugged in the new cluster and not changed the software and some things don’t work. Does absolutely everything work in this for you, including the eco gauge on eco mode? Do you have a video showing every function working? Thank you.
Hello. Can you help me please with this job. I'm from Winnipeg and going to do it. Can I ask you few questions, thanks.
Email me at volvoswedenbuisness@gmail.com and I will give you my number .
@@volvosweden OK. Thanks. EMAIL sent. Thank you.
Hi :
Thanks for all your videos 🙂
Doesn't matter here what is motor code or gearbox code ?
Also I have navigation screen in my volvo but without touch screen or car play... can I upgrade to touch screen ?
My from 2012 D5
THANKS 🙂
Hello ,I appreciate all yours videos,can you put the link where we can buy vida dice,or the one that you have?Thanks
You are life saver mate
Thanks for the interesting video. I have a 2007 Volvo S80 and would like to install the newer analog display. Can I just swap that in or do I need the software for that as well?
Very Good video. I follow all the instructions and it is working but the only think is that the speedometer is in miles (like it supposed to be because I am in US) but the odometer shows in kilometers. And I ask the people from d5t5 to help me fix that, but I guess they are too busy. You probably know. Or you may tell me how can I reverse so I can put the old cluster back. I did try to go back and install the old cluster but it didn’t give me the option. Thank you. I hope you can help me. All your videos are really helpful.
Hi from Sweden
Great video tutorial. Is it necessary to remove the horn fuse..? If it's not removed what will happened?
CHARALAMPOS GKIATIS
The car will sense low voltage and the horn will start.
TFT retrofit for a XC60 2011 done! 👍
Hello, I know this is an old post but will like to know if your TFT works fine and what is/are the limitations and your odometer readings, was it affected by the dim change?
How do you change/correct the time and reset service light after the retrofit?
@@oohjeriHi. It works just fine. The time can be changed by using VDash app on a windows pc (it's done automatically when you connect to your car through the ODB port), the service light can be reset in the menu or with some combination of buttons, don't remeber which. The limitations are listed in the How to article listed in this video description. (the eco meter is not showing anything and the power meter on the red theme does not indicate the real power level just something that has to do with the rpm or something like that).
@@victordoldor6302 Thank you for your prompt response.
Another question, where did you get your dice any pointer will be greatly appreciated or can I use the J2534 OBD connector from amazon?
@oohjeri I don't really know. I got a volvo knockoff i found on the web.
Did this to my 2012 S60-R with a 2016 S60 TFT. I just added 2 wire, i didn't need vidaduce or VDASH. Everything is working except for the power level gauge.
really? no need for VDASH?
Did on mine, now I have DIM error no DIM detected... but the replacement works. It looks amazing but I do not know if I will keep it because I cannot reset the clock or maintenance so it tells me every time I start the car that maintenance is overdue... when it is not. 2011 S80.
Hello from France. I have a volvo v70 2016 model. Thank you for your videos. Do you know how to stop (shut off) the Security belt alarm please.
Great job. What is the product number of the cluster ? I cannot find it on the Volvo parts website.
I have xc60, 2009. Do you know does it work on my car, so i can go to shoping parts🙂, and whether it shows when the light bulb stops working and the like, i didn't understand it best, also when the door is open does it show on display.
Like your videos very much, thank you.
Seriously, I was expecting to see the final result for a while longer....and see the changes with before/after comparison, for people who doesn't know those models.
Where in Vdash did you manage to change the Theme to blue?
HI! what's that green switch on your steering column cover?
It is for the HELLA fog light
Great job. Is there also information about how much petrol car take on this tft speedometer? I can see only temp..
Very nice Video! I see that CEM decoding takes some times for P3. Is that same as SPA/CMA platform. If so, is there any way to improve decoding process.
Love the idea of the upgrade and would consider it if it were perfect afterwards. Sadly the compromises are to much for me. For the money to invest into this I'd like it to be fully functional.
Hi. Any chance this can activate tft cluster in volvo v40 2016? Thanks.
Same question
Love this!
What are the costs after unlocking the CEM? I know you said the price might change, but the website says nothing about this all. I am looking to do this upgrade, but don't want to do all the work and buy the unit to then discover a huge amount of money to do the upgrade
£120
What gauge wire do I need? And why does it need to be twisted?
I'm interested in buying a 2007 v50 t5 ( P1 platform ) in good condition, there are some for sale here. And i want to upgrade to the digital panel on it. Its possible? Congratulations on the content Hugs from Sao Paulo Brazil
Fantastic stuff ! Do yo happen to know if you can do a retrofit on a 2011 C70. Thanks again!
Nice vid. Thank you Yuri.
Hi, i have XC60 -2010 year. Do you think that the tft will fit - start working on the same way as in your car. Thanks
What is the green buton ON/OFF at 19:53
ruclips.net/video/zNcD67ib4Tk/видео.html
I see a lot of people doing this without vdash update and working straight away. What is different in their car?
Where do you see that?
Yah Productions
Some of the functions will not work.Some just soldere the two wires and everything worked.
It’s up to luck.
Very cool! What happens to the original mileage? will it be transferred to the new one?
Yes that’s what the download / backup does in VDASH before you remove the old dials
Hello from Sweden I was wondering if you could make an Guide how to change the grill from pre facelift to the facelift grill.
Dave Wsh
You can find that info in the volvo accesories web site.under styling you have grill and install procedure.easy peasy
Hello my frind, great videos, I have one quetios, I have a volvo xc60 D5 2010 planning to updrade the virtual display, which year should select ? and do you have the link where to buy it
Is there anyway to contact you? I am from Winnipeg and would like more information about the Volvo programming..I would rather just pay you to enable some stuff
Hello, thanks for all your effort and work you put into making these videos! Can you please give us the link to the Chinese Dice clone that you bought? There are many to choose from on Aliexpress, I would like to have a link for a tried and working one. Thanks
Hi, where are You located?
@@martinbrlej7343 I am from Bosnia and Herzegovina. Why are you asking?
Wondering if this will work on the S80 V8
why do you need to remove the wires if you give the old counter back? I have already wired the old counter that is in use, I already have a new counter in the garage ... dice comes in 14 days .... but the car works without problems with these wires (xc70 MY12)
I am a little surprised that nobody wants to talk about how much the software costs
150 and 250 $ depending on year
$280 USD! little bit disappointing to find that out after spending a couple hundred on a TFT...
@@Andysanche the worst part is my fuel gauge worked on the new tft BEFORE I installed their software. $139 US LATER and no fuel gauge. No response to requests for support.
Guys and Gals. I have to retract my earlier comment. It took awhile, but I think Pavel works solo so understandable, but he did get back to me with a fix on the software side which worked!! I guess my experience is the rarity. usually this TFT replacement procedure works on the first go without a hitch. But either way, D5T5 followed up and made it work! Super happy, Pavel is awesome. Highly recommend doing this........
@@jonasboinay I hope he can help me out - VDash can't detect my new TFT DIM at all, so 200 Euros later I cannot complete the process..
What where the steps like in the tft software? Is the old cluster the most time consuming part, that cracks the cem, is that before step 4? Does the dim code go away when complete? Is the new tft loaded after step 4, is it a long process, did u get a message once or twice about a volvo dealership and getting locked out due to using unsanctioned hardware?
If you install this TFT, can a Volvo dealer or workshop clear service light, or is this only available for purchase in VDASH ?
There is something else that can happen. After everything is insalled properly, the car might not start. It says immobilizer active. The only way to get the car to start is to put the old dim in, start the car and then switch the dim again while the car is started. Problem fixed. Did it on my S80 V8.
p.dutt
When swapping dims,do you need to take out the two wires soldered before or they remain in the same position?
I got the v8 too hows the dash holding up was it worth it?
Hi how are you,, question is D5T5 is like vivda from volvo, can I use this Instead of Vida, I want to thank you for your help on all your post on RUclips
Nice video👍 i have a xc60 2012 D3 2,4 summum do i need to download all wath you did?
Thanks again Yuri for sharing this amazing video. I was also planning to install a digital cluster. Your video will help a lot. What's the green button on the left side of your steering House?
Green button is for the Hella Lights. Here is the video.
ruclips.net/video/wdu9CyokSPI/видео.html
how much did vdash cost to decode and program tft to the car in total?
For a 2013 S60, will it work by just removing the old cluster and fit the new one? Do I need to complete the whole process? Best wishes
Does the parking heater still work after the retrofit?
hello may i know how much it costs? € ? and how low will it take for installation? may I also address?
Hello , is it possible for my 2013 v40 ??
Hi, beforehand many thanks for your videos....i have a question, i did the installation but for any reason, the DSC control is out of service...i try to activate it but the check dissapear 1 second after the activation...i'd like to know if you know what is the reason of thisd issue.. i appreciate your help in this matter
anybody knows how can i fix this issue?
I have this fitted to an S80 I brought, can't figure out how to change the time
Hey, i have a problem with power gauge, it doesn't move at any time, do you know what could cause the problem? Thanks in advance
Volvo S60 2.0T 2011
Electronics related question:
If I change the light switch from a 2011 S60 to one with "Auto" position (from facelift models), will the "Auto" function work out of the box, without any other wiring or software? Thank you!
2011 didn't have dedicated DRL so it would do nothing even if the auto worked. I once swapped an "Auto" switch from a 2014 V60 to my 2008 XC70 to see if it activates foglights as DRL like on new XC70s, nothing happened, low beam in all three positions (0, Auto, Low beam).
@@johannessoonik1007 Yes, I'd be expecting DRL lights not to work (as I don't have any), but since on "0" I have low beams turned OFF, I'd expect them to come ON in low light, as the car has a light sensor near the City Safety camera.
Also, on V40 models, when driving in shade or cloudy weather with "Auto", the parking lights switch ON in order to have the the tail lights light up and more visible.
So on "Auto" I'd expect OFF lights in daylight; ON parking lights in shade / woods / sunset, and ON low beam in low light.
If it is insinstalled in a v70 2014-2017 will work all function or remains limitations?
Where do you buy this instrument cluster?
How you changed servise interval?
Hey are you going to retrofit xenon lights?
Why do the two wires need to be twisted?
Do I need to do all computer stuff for make it work or can I just do all wires stuff and make it done
Hi Does the TFT retrofit Software Cost anything from D5t5 ? or is it For free?
Can you do a video, how to motor optimization via vdash?
volvosweden ,what color of the positive wire in reverse light for xc60 2011?..thank you..
My 2015 XC 60 Instrument Cluster went black. How do I check the fuses or discover if the panel is bad ?
Is that original factory cluster?
Great video, followed it & upgraded my XC60 to the TFT dash. Could you do a halogen H/Lamp to Bi-Xenon upgrade using the V-DASH. I’m giving it a go but not sure I’m doing it right 🤔
It is mentioned on d5t5, read all possible upgrades there
@@jokullmtl I contacted them in Jan 2021, they have never replied. I have the lamps, made the CEM software changes but it just doesn’t work 🥴
@@viperx220racing3 The wiring is different between halogen car and a bi-xenon. Wiring harness is different, can not just enable it with software.
@@JackMoynihanOfficial Ah ok, fair enough. D5T5 state it’s possible but it didn’t work when running the software. I’ve just learnt to live with halogen now. But it’s a shame all the same. Many thanks 🙏
@@viperx220racing3 yes there are writeups for how to do it on the P3 V70, the harness has different pins on the xenon models to power the ballast and other wiring things inside the headlight. The software changes only enable the active bending lights if the correct hardware is installed on the suspension of the car. Check Swedespeed
Would that work on 2008 model by any chance? Great vid btw!
Does it give you a total of credit that you need to add when doing this retrofit or do you have to guess?
Is the adaptive cruise control working?
I have a Volvo V70 B Diesel 2009. The front left headlight pop up washing has broken. I would appreciate it if you had a video showing how to replace this. Any chance please?
I just tried to crack my ECU on my P3 S60, and there must have been an update because every time I walked away or shut my hotspot off, VDASH had an issue
Can you put this in a s80 2008 ?
Question about Volvo dice, can I also use other alternatives or it has to be the one you've got (even it is Chinese knock off) as I have seen other devices however, I am not sure if it will be good to use?
@volvosweden did you have to have the volvo dice disc in your laptop in order for the dice to work?
Vdash is completely separate from the dice disc. Just download the Vdash software.