Vector E-Dock Review And Install
HTML-код
- Опубликовано: 3 авг 2024
- Hey Everyone! In this video i am installing a Vector Offroad E dock, this will allow me to mount all sorts of things easily in my Jeep. The install is pretty straight forward but will require a few things like a deep well 13mm socket and a telescoping magnet. Thanks for watching!! And stay tuned for the Ultimate Dana 44 Raffle!!
Vector E Dock: vectoroffroad.com/collections...
67 design mounts: www.67d.com/collections/mount...
Phone Mount: amzn.to/2PkY5E0
Go Pro Mount: amzn.to/2roxlZw 
Авто/Мото
Thanks man! I’m breathing a little easier now……a glance at the installation pages got me a bit nervous but your video was very helpful and now I’m looking forward to installing mine in the morning! Thanks again, God bless, and stay safe my friend!………from Surprise, Arizona 🤠👍🏻🌵🏜🦂
I think I'm still 14 years old cuz every time you said dropping nuts I chuckle a little bit. The other side is it looks like a good mounting option for a crapload of gear. It does me no good cuz I'm one of the guys with a Poison Spyder Trail cage but I watched your video anyways! Here's a thumbs up for you!
Rich Lynch don’t drop dezzz nuts 😂😂 not the only one
Press F to pay respects for Ben's selfie camera. ☠
The part where the Elf helps you is fantastic! LOL
You are funny in hyper mode. Lol. Great install video
Love my Vector Offroad E-Doc it is awesome,got my phone and my GoPro on it right now. Will be getting another phone mount and maybe GPS mount as well. Great vid!👍
Nice mod, looks good and function added as well 👍
Looks good Ben 👍
I'm trying this in the morning
Excellent video on the install !!!
Love my e dock! Was one of the 1st things I got for my JKU! .. What I really need is that D44 though :)
I just purchased my factor 55. Will have to wait a few months before I can get this. Great video though.
Nice upgrade ben!
Just got mine today!
Have you looked into RAM mounts. Very modular and have all the different mounts that you need.
Love it and looks really good. Kinda wish I’d had bought it for the month I went before adding my sport cage. You going to run some 67 designs mounts? I have them on my rock hard cage and they are great mounts!
You sound like one of Sants’s elf 🎄
Note- installing into a 13-18 is much simpler :)
Awesome video...love the realistic installation with problems and all. Question? Can the center of the vector dashboard be open?...I have a roll up dash door compartment I will like to keep. Thanks
You can choose to not install the center tray, however I’m not sure if it will work with a roll up dash compartment
No droppin nuts!
Can you make a Prius install video the vector edock won’t fit in my car or just give me a Jeep thx dad
Ive been debating this for a while now. I'm thinking of going to a sports cage some time in the future so Im not sure if I want to spend the money or not, but I need some mounting options now.
That’s been my concern too, but went ahead and got it. If/when I do a cage this item would be easy to sell to another keeper since it’s not a wear item
@@JKGearandGadgets yeah thats very true. I may just have to get this, or leave a few subtle hints that I want it for Christmas. Subtle like sending a direct link saying I want this for Christmas.
No TJ LOVE, there doesn't seem to be anything similar to this or the Factory 55 one for the TJ. :( I wonder if this one could be modified to fit a TJ.
Really would like to buy this. How is it ok the trail? Do you receive a lot of vibrations or phone falling out of the holder often? I have an oversized phone/case and struggle with the rugged ridge dock a lot.
I have the Rugged Ridge dash top tray and was wondering if it would be better to cut out the metal tray of the Vector E-dock for a “deeper” tray setup. Will this fit underneath?
You can buy the Vector bar without the tray.
Hi .. can you comment on exact specifications of the 13mm deep socket? Is that hex socket? If you have the part number I can order the same? Also did the 13mm magnetic nut driver, I suppose that is deep socket too? Do you know that part number for that of the Amazon link? Just want to make sure I order the right r
Tool. Thanks in advance!
just curious, how much space is there between the dash and bottom of the vector tube?
About 7/8”
Are you still doing the super Dana 44 contest I saw that your video had been taken down or deleted also great videos starting on my
Lj fun since I am legally blind now LOL building it and a couple Cherokee’s and other jeeps on my channel definitely going to be
All the spots filled up. A lot faster than I thought it would lol. So I had to take the video down so people didn’t keep sending in entries
JK Gear and Gadgets I hope I got my spot in soon as I saw your video I sent the money in
Wrenegade Offroad if you sent payment and didn’t get a refund then you are in!
JK Gear and Gadgets suite and thanks again for even holding their giveaway that’s pretty cool
Is that a newer mount mine only has 3 mounting points and no cover in the middle
Yeah I just got it, but as far as i know this is the design they have used for a few years
My jk is a 2016 I thought yours was newer my bad but I do like ur center section alot nice video and these vector bars are sweet and what's the status of those 1 ton axles you showed awhile ago looking forward to that video
It's not for Vector the robot then 🤣 I did think it was a bit weird 🤣😀
Does the metal plate in the tray affect your compass?
I haven’t checked, that might be a good question to ask vector offroad
Does this block the defroster vent?
Nope!
Hey mean ..a ? its safe for driver and passenger
Yes!
does your hardtop leak when it rains?
Not anymore, went back and tightened the bolts and it’s good jow
Is there aluminum one?
No, but this thing doesn’t weigh much at all. No need for aluminum
tape the bracket to not scratch the "POWDER COATING"!!! really dude?!?
It’s a thin layer of powder coat. The socket rubs up against it very hard. I recommend stuff like this in videos so I don’t get a mad comment from someone who messed up their powdercoat. I’m sure it wouldn’t actually chip the coating, but it could leave a mark for sure. So it’s really easy to avoid that with a piece of tape
Rip iPhone
No thanks