How to 3D Print with ABS Filament [Snapmaker Academy]
HTML-код
- Опубликовано: 25 авг 2024
- ABS can be trickier to print with than PLA, as it's more demanding on the printer, the environment and printing skills. But on the plus side, ABS is more flexible and heat resistant, while having enough strength, making it a really handy material. Let's give it a shot!
Follow us on:
Facebook: / snapmaker
Instagram: www.instagram....
Twitter: / snapmaker
Join Snapmaker Forum: forum.snapmake...
![Printing LED Letters with PETG [Snapmaker Academy]](http://i.ytimg.com/vi/SwhTJM7DJdY/mqdefault.jpg)
![Tee Grizzley - Detroit (Feat. 42 Dugg) [Official Video]](http://i.ytimg.com/vi/aeKfTtt0x14/mqdefault.jpg)
Snapmaker Academy is cool and helpful. Great job! Keep the academy series!
Many thanks😉
Wow, this came in when I just finished some ABS print. My support structure failed but the print turned out to be almost alright.
I haven’t tried printing ABS yet, but my understanding is that on the A350, only the middle of the bed is capable of heating up to the necessary temperature, thereby limiting the size of ABS prints on this particular model.
Best video you Snapmaker made.. Well I hope you can produce such more informative content... I might suggest adding such videos for how to use on each model of your products because it is hard for beginners to understand most of the concepts.
Sure! Thank you for your feedback!
is that de dji voice 🤩😍🤣
I have my snapmaker for 2 month
Do you have any tips for TPU filament? I can not seem to get it working with the Snapmaker (2.0)
Sure! We're now making a series of printing tips videos, covering ABS, PETG and TPU. So, it's going to be the episode after next. Stay tuned!
I will now try abs... The bed temperature cannot be set higher than 90 degrees for the A350, does this mean the biggest model cannot print ABS as good as the smaller models?...
Hi! You can heat the bed on A350 to over 90℃. But considering the time it will take, we don't recommend it. And since ABS from different manufacturers may vary in material properties, it's possible that some of them can't be printed well on A350 when the bed temperature is under 90℃.
@@Snapmaker Please can you tell me how long it takes to reach 100 degrees?... I am now waiting 50 minutes to reach 93...
@@Snapmaker The first attempt failed, it warped and the printhead teared the print loose... So I must go higher than 80 degrees, because that will lower then tension in the upper layers, I suggest... If I cannot go higher is ABS printing possible?... Or do I need to learn something else to print propperly in ABS?...
@@ShantiSprengers add glue and use a glass bed :)
It took about 50 minutes to reach 100℃ in our previous test. Maybe you could add some glue, as faraz replied, or use blue tape. Another way is to add an enclosure (a simple DIY one will work) to keep a constant environment temperature around your print. Also, the manufacturers might creates a same type of material that vary greatly in properties, due to some minor differences in crafting technology. Some may be as easy to use like PLA, but some are just very difficult to print with😂 If you still can't print well, maybe consider using a filament from other manufacturers.
Hi everyone !
I would like a Snapmaker Academy on flexible filaments and filaments charged with different types on metal please.
Because it doesn't work I need help!
Hi Michael! Thank you for your feedback. Actually we're now making a series of printing tips videos, covering ABS, PETG and TPU. As for metal filled material, that's a interesting idea. Will give it a try🧐
Can you please do one on iPhones
🤔A slicing software on iPhone?
Too bad Snapmaker can't ship a working unit to new customers. I've been having problems since September without a resolution. DO NOT BUY!!!
Edit: Update. I did eventually get my problem resolved 4 months after the promised delivery date.
Hi. According to our colleague Tracy, a replacement component has been sent to you, and it works well now. We sincerely apologize for the inconvenience, and hope you enjoy making with Snapmaker. If you have any other problem, don't hesitate to let us know.