I just changed my Xenon bulbs.But I have a swinging headlights ( they turn right-left when I swing)Are those selv adjustet after the bulb Exchange or there is a procedure so they must be calibrated manually?While I was working the bulb socket moved right-left and I'm not sure if it calibrate automaticly when I start the car.
Yes, the cables are a bit stiff but you can still move them over to the right and hatch onto one of the covers. If you're reasonably gentle with them it shouldn't be a problem.
puzon343 after watching the video a second time I clocked you could remove the wiring from the plastic box. I've never experienced such a poor design so thank you for the video as although awkward once you know it's relatively alright
It is getting easier when you have don it twice :)1. Remove both plastic covers2. Disconnect Minus pole and the Plus pole, no the Plus separate 2 cables fasten With M10 nut, on the Minus there is additional socket, disconnect too.3. Cut the pigtails holding the 3 bunch of cables4. There is a Clip under the grey Box on the left side , unfasten that one and you can just bend the cables and the fuses plate up and right
Thanks for the video! It was really handy! It would’ve been great if bulb connectors had longer wires!
Crazy construction just for a bulb
Ничего не понятно , но очень познавательно...
Теперь ясно почему у вас так много рабочих мест...
Особенно интересно как левая лампа раскуроченна 🤣
On my 508 with xenon i have poor visiblity in rain. Blubs seem good but ligth cutoff and spread its not god on road. Can projecotrs been cleaned?
Hi. Did You found out if projectors can be cleaned/replaced? I also have very poor efficiency in one of headlights and bulbs were already changed
Hello, what is the metal clip, 4:32 min ?
I just changed my Xenon bulbs.But I have a swinging headlights ( they turn right-left when I swing)Are those selv adjustet after the bulb Exchange or there is a procedure so they must be calibrated manually?While I was working the bulb socket moved right-left and I'm not sure if it calibrate automaticly when I start the car.
Adaptive headlights. And they auto calibrate.
After i do the same work like you my assistent lights stop works...in night does not change the long distance lights with the shorts...?Why is that?
How do you get the wiring out the way once free of the battery. I just cannot manourve it
Yes, the cables are a bit stiff but you can still move them over to the right and hatch onto one of the covers. If you're reasonably gentle with them it shouldn't be a problem.
puzon343 after watching the video a second time I clocked you could remove the wiring from the plastic box. I've never experienced such a poor design so thank you for the video as although awkward once you know it's relatively alright
It is getting easier when you have don it twice :)1. Remove both plastic covers2. Disconnect Minus pole and the Plus pole, no the Plus separate 2 cables fasten With M10 nut, on the Minus there is additional socket, disconnect too.3. Cut the pigtails holding the 3 bunch of cables4. There is a Clip under the grey Box on the left side , unfasten that one and you can just bend the cables and the fuses plate up and right
안녕하세요
램프 교환 정말 어렵네요
Which model is it and is it led ?
Xenon bulbs D1S