LED Firework build
HTML-код
- Опубликовано: 8 сен 2024
- How I built my own LED firework using pebble lights.
STRUCTURE
• Porcupine ball- Amazon a.co/d/ep7WGut
• Spokes (tomato cages from local hardware store were used in this video)
• ½ PVC pipe- cut to 2.5” sections- from local hardware store
• ½ PVC pipe caps- from local hardware store
• Some method for the base. I’m using an umbrella stand with a ½ metal conduit running inside a 2” metal conduit.
• Zip ties
• Liquid nails or hot glue
WIRE COMPONENTS
• LED pixels. I used seed, or pebble LEDs. You can use strips or nodes, but I prefer the pebbles because they are cheap and easy to work with. I chose 12v from this site pixelparadiseu... , but they can be ordered anywhere. Make sure you order WS2811 addressable lights. I also was careful to select pebbles that could be cut anywhere within the string. Some pebbles can only be cut at every 3rd string.
• 3 conductor electrical wire- Amazon a.co/d/fZIb3fN
• 3 wire quick-connect (optional)- Amazon a.co/d/exurDTT
• Solder sleeves- www.wiredwatts...
ADDITIONAL COMPONENTS TO MAKE IT WORK (NOT SHOWN)
• X-connect pigtails- Amazon, Wired Watts, Your Pixel Store, etc.
• Dig-Quad LED Controller- www.drzzs.com/...
• 12v Power supply- www.wiredwatts...
• WLED software (download free) kno.wled.ge/
Thank you so much. I was able to steal many of your ideas, and I wasn’t sure how I was going to do what I want to do, but your video gave me many ideas; so again, thank you very much, and great job.
Amazon 24" yard sticks spray painted. But your rods are super thin. LOVE IT!!
That was brilliant, thanks sharing.
very impressive DIY Project 😍😍
Would it be possible to get your Wled setup.? Great video
can I get some more info on the wiring of the groups ? are they in series or parallel?
I can't say for sure, but at 13:27 it says "WLED only recognizes one spoke since they are all wired together. Total LEDs to input is 23" To me, this means 25 strips of 23 LEDs wired in parallel.
Are these 5v or 12v?