Your videos are so calming to watch, I barely noticed 20 minutes had passed! I love your whole aesthetic and I love the humour coming through your subtitles too. The amount of polish and attention to detail through your graphic/video design as well is just- so pleasant and unique. Thank you for sharing your beautiful art with us, I hope you’ll continue to do so!
@@2ynthetic I was going to comment basically the same thing she commented hahaha Simply amazing your videos, I'm watching here in Brazil!! I found every detail absolutely incredible!!
Windows 10 still faster than Windows 11 and uses less hardware resources especially on intel CPU older than Alder Lake Architecture (12th Gen). Overall Windows 10 OS is stable and runs smooth. Don't upgrade soon, good to see you still using Windows 10
not sure if someone has already mentioned this, u can retain the nzxt fans position at the front, just move the radiator up (below top fans), fit the nzxt fans to the casing at the front then fit 2 top fans to the radiator to the top (make sure its intake) so this way we can improve the temperature as fresh air gets in direct to radiator, rather than hot air from RTX3090 blowing to radiator at the front, now.
Amazing build and I love the aesthetic, but just a quick heads up to set the two fans on your NZXT aio cooler to intake on the front to get better temperatures. Your current fan configuration is set to negative pressure (which means you have more fans set to exhaust than intake, resulting in a greater dust buildup than if you had positive or neutral pressure). Whatever air that gets blown out from your case will loop back round into it, causing higher temperatures.
Watching your video made me one to reconsider getting RGB components like on your memory. I avoided the RGB to reduce power draw and I thought the bright colors would be distracting, but I like how you toned it down to just a few hues.
By the way. The effective way to apply thermal paste on processor lies through center, its most important. 1big dot, or five smaller or traditional with line at side that can be rolled out with something flexible and flat like rectegular flexiblle magnet. Iam using last method, becouse you will get thinnest and flat layer with 1st try if you move card from side to side smoothly. Any way with that magnet you can make as much attempts as needed after that, result will be acceptable.
Lovely. I had to IMMEDIATELY order the Screwdriver Set! You place is like watching 'Oblivian' - with none of the bad stuff. Thank you for sharing. Looking around it seems 80c or so is common for an aircooled 5950X under load but possibly a bit high if liquid cooled. Maybe investigate that. Cheers
ahaha, Oblivian is a great inspo ! the screwdriver set is so well designed.. i love it. thanks so much for watching and thanks for the tip, will definitely look into that
Sup, just wanted to say that 2 fans on your nzxt aio should be set as intake on the front of the case coz now you have all your fans set as take off. It will be pleasant for cooling your hot ryzen and for the rest of your components
Thanks for the awesome videos. The ability to convey meaning without words is worth a lot. And as a person who works with video, I understand how much effort it takes to create such a video.
haha isn't he indeed so spicy and handsome ! thank you and hope you had a good work week. glad u r also into the music. i've been watching so many minecraft vids lately
I love this. I want to evolve my aesthetic in a similar fashion. Also, did you know you can change the boot logo on these ROG motherboards to your custom logo? In the same ASUS app you use to flash the bios, AI Suite 3 I think. Or it might be EZ updater. Your custom 2ynthetic logo would be awesome to see on boot.
Good thing the RTX 3090 is in the hands if someone who will use it for something besides mining. The most laid back build video ever. Also are you going to overclock? Just checked R/AMDHelp and someone suggested resetting everything to default (voltage, frequency) first then use offset -0.1V then try cinebench. This will theoretically give you a -10 to -15 c temp difference. Alles Gute!
It's utilized better for mining than the redundancy it's going to experience there.. she's not going utilize 30% of the capacity of that gpu.. even editing 12k which NO one is using atm
ahh thanks for the tip, i'll look into the overclocking. yeah i'm excited to see what i can do with real time rendering projects now that i have the rtx :)) danke :D
watching your video, sipping on a cup of coffee and savoring some cake, raining outside and blankets all around. the perfect day thanks to your upload, definitely the cherry on the top. congrats for building your pc, and thanks for sharing another great, well made, calm video full of whim. you are definitely one of my favorite creators. thanks again for making my day a tad better with your upload.
definitely the absolute perfect way to watch the video :D sounds so lovely. thank you so much for watching, I’m glad I could be part of your relaxing day
I love your videos. i have a tipp for your PC, all your Fans are blowing Air out of the PC, so you create negative pressure inside the Case. Maybe you turn around the front fans, so they are blowing in fresh air. When you turnb around the front fans, the radiator colellects dust from the outerside. It's sometimes annoying to find the correct way to mount fans.
thank you for 20 mins of joy it looks good, super clean and kind of funny. Spaghetti line got me well x) enjoy your build! and big like also for daft punk and minecraft OST!
It is possible that it does not affect anything, but for future builds try not to mix thermal paste, it is possible that they have a reduction in efficiency when mixing the components
hey awesome video! just wanted to point out its sometimes recommended to run two separate power cables from the power supply to the graphics card for both plugs.
Your videos are soo relaxing to watch I love them! I always watch them when while eating breakfast. I simply love your aesthetic and I will for sure take inspiration from you for me future office. Keep up the fantastic work!
Оказывается я не так плохо знаю английский В этих видео такая спокойная атмосфера Хотя услышать музыку c418 здесь я не ожидал А из-за огромных интервалов между музыкой создаётся атмосфера майнкрафта Я не ожидал, что открыв комментарии у меня возникнет желание написать свой такой же милый
Wow how funny my pc was also from 2016 and I needed to upgrade the cpu and ram because my art software was crashing so bad! I have a black and white build and named it panda 🐼 the components are all white except for the inside of the case and my peripherals. I love that little tool kit you have, what a clever way to hold bits!! This makes me want to throughly clean my keyboard and finally upgrade my cooler too an aio! I bought it last month, but I haven’t had to time to install it and I need to rearrange my fans.
2ynthetic I like your style and that's why I started to follow you. If I'm wrong you can correct me, but I think that the front fans should go outside and not inside due to the type of air movement they generate.
Just want to ask you being a designer and a aesthetic freak, by the way I’m one too, why do you prefer a PC instead of a MAC? Love your videos and aesthetic, the way you hide your face it’s very….cute😉
I could watch this quality soulfood forever 👌😇👌 Ps. Was your ram XMP on btw? So you don't miss out on all that ram power...cute aaand powerful 👍 Have a fantastic week, and a good coffee ☕
You should next get linus to build you a petabyte NAS so you can keep all those huge project files from your DCC's archived properly! Plus itd be a nice "decorative object" for the studio XD
I'm glad you got to do the build! This is Atom again haha! Great videos as usual! Loving the build! I'm jealous of you to be honest haha! My build has 6900 XT (which I'm thinking if I should change it to 3090 or 3090 Ti) - or maybe that would be an over kill! Loved the video and vibes, and everything! Nice colors, and enjoy the new PC< and looking forward to see more of the work you do with it! Awesome! Into the next video of yours now!
just a small suggestion for the aio cooler fans orientation. These should be flipped as intake to get fresh air from the front than exhaust. In exchange, you will lose some of RGB light since these fans only have light on one side. But you can also put the fans in front of the radiator if it is not blocked by GPU. So that you can both get better airflow and RGB.
thank you, that's a great suggestion. yeah i couldn't do the intake/exhaust setup i had planned bc of the cooler fitting issue. i don't really want to flip the front rgb fans bc of the looks lol, but i was thinking about flipping the back single fan to be intake like the top fans... it still wouldn't be my ideal tho. anyways thanks again :)
@@2ynthetic have you tried swapping the position of the fans and radiator. So scews will go through front plate --> fans --> radiator. I still have a hope that this way will work. Other wise flipping top fans as intake will also work fine. Swapping fans with rgb in both sides in the future is also a good idea too.
@@thangnguyenviet5628 the thing is i want the radiator fans to be towards the inside of the case, not towards the outside. otherwise i agree switching them to the other side would be the best option. currently the top fans are intake. yeah i'll probably just have to get different fans to achieve the ideal
hi, i think u should put water cooling on top... because now u have two sets of fans : one from case pushing air inside and from water cooling outside ;p also its just better for pump to be verticaly on bottom so there is no air on pump. best way to slove it is just put cooling on top
Beautiful! We have almost the exact same system, except you have a waaay better motherboard. That and a new case are what I’m upgrading next. (And I bought mine as a refurb custom from NZXT. Not brave enough yet to build my own).
love your videos! so cozy and love the aesthetics :) I had a question about your choice of NVME storage, is there a reason you went with gen3 samsung 970 evo plus rather than perhaps a gen4 980 pro for example? im deciding how to choose storage for my pc also (photographer/photoshop) and I also have gen4 pcie storage option on my motherboard with a 970 evo plus that i might upgrade
I almost had a heart attack when you were peeling off the protective plastic on the glass while the PC is running. Sometimes peeling it off creates too much static that it kills the PC. Next time, maybe peel if off before you assemble the PC. It happens very so often but you can never be too safe.
![unproductive vlog / relaxing day off at home [extreme]](http://i.ytimg.com/vi/mizobdny19o/mqdefault.jpg)
![unproductive vlog / relaxing day off at home [extreme]](/img/tr.png)
your commitment to the aesthetic is so impressive i wish i could live like this
Your videos are so calming to watch, I barely noticed 20 minutes had passed! I love your whole aesthetic and I love the humour coming through your subtitles too. The amount of polish and attention to detail through your graphic/video design as well is just- so pleasant and unique. Thank you for sharing your beautiful art with us, I hope you’ll continue to do so!
thank you for such a nice comment T.T i'll keep sharing as much as i can :))
@@2ynthetic
I was going to comment basically the same thing she commented hahaha
Simply amazing your videos, I'm watching here in Brazil!! I found every detail absolutely incredible!!
Windows 10 still faster than Windows 11 and uses less hardware resources especially on intel CPU older than Alder Lake Architecture (12th Gen). Overall Windows 10 OS is stable and runs smooth. Don't upgrade soon, good to see you still using Windows 10
For now. They're going to bork it soon. :(
everything about this channel is just so aesthetically pleasant !! you are very underrated and deserve much more ♡
thank u so much that's very nice of u to say :))
I just wanna say that I think your choice and use of Music were impeccable. I was actually getting chills when Warmth came on.
The 2YN logo on the plate and cooler are just *chefs kiss* Also very jealous of the 390. Great video as always 🌌
thank u sm :) I’m excited to see how things go with the 3090
Rewatching your videos while doing my own 3d work feels so satisfying and calming every time✨ Thank you so much for your channel!
So glad to see a new video from you! I can't find content like this anywhere, plus your aesthetic is impeccable
thank you for watching :)) i'm looking for more content similar to this, too. i love studio vlogs with some tech stuff
So therapeutic to watch, really good parts selection. The custom fan plate was the cherry on top for that extra identity touch. MC music fits so well.
not sure if someone has already mentioned this, u can retain the nzxt fans position at the front, just move the radiator up (below top fans), fit the nzxt fans to the casing at the front then fit 2 top fans to the radiator to the top (make sure its intake) so this way we can improve the temperature as fresh air gets in direct to radiator, rather than hot air from RTX3090 blowing to radiator at the front, now.
I love the coffee spill in the beginning lmao. the "omg" got me. love your videos as always 2ynthetic
lol thanks very much :D
i love everything, from your humor to the vid itself, and the pc is so beautiful i'd cry
thank u so much :') we can cry together
Amazing build and I love the aesthetic, but just a quick heads up to set the two fans on your NZXT aio cooler to intake on the front to get better temperatures. Your current fan configuration is set to negative pressure (which means you have more fans set to exhaust than intake, resulting in a greater dust buildup than if you had positive or neutral pressure). Whatever air that gets blown out from your case will loop back round into it, causing higher temperatures.
Watching your video made me one to reconsider getting RGB components like on your memory. I avoided the RGB to reduce power draw and I thought the bright colors would be distracting, but I like how you toned it down to just a few hues.
the ambience is so soothing i love it
~be soothed~
The music at the end was so nostalgic somehow 😂 great build. Somehow the failed coffee shot made the video more relatable
you're such an inspirational artist, you have an amazing vision!
thank you that is so sweet T.T
Aw man, I've waited for this video since I got the notification earlier this week! I love your videos, I've said that before I think, lmao.
thanks so much for the support bree :))) i'm so happy to hear you like watching the videos
By the way. The effective way to apply thermal paste on processor lies through center, its most important. 1big dot, or five smaller or traditional with line at side that can be rolled out with something flexible and flat like rectegular flexiblle magnet. Iam using last method, becouse you will get thinnest and flat layer with 1st try if you move card from side to side smoothly. Any way with that magnet you can make as much attempts as needed after that, result will be acceptable.
0:52 the way you’re moving the camera slowly down killed me (≧∀≦)
Lovely. I had to IMMEDIATELY order the Screwdriver Set! You place is like watching 'Oblivian' - with none of the bad stuff. Thank you for sharing. Looking around it seems 80c or so is common for an aircooled 5950X under load but possibly a bit high if liquid cooled. Maybe investigate that. Cheers
ahaha, Oblivian is a great inspo ! the screwdriver set is so well designed.. i love it. thanks so much for watching and thanks for the tip, will definitely look into that
I like the CPU/GPU combo it's excelent for 3d artists, you nailed it!
Sup, just wanted to say that 2 fans on your nzxt aio should be set as intake on the front of the case coz now you have all your fans set as take off. It will be pleasant for cooling your hot ryzen and for the rest of your components
fans at the top are intake
Thanks for the awesome videos. The ability to convey meaning without words is worth a lot. And as a person who works with video, I understand how much effort it takes to create such a video.
I just loved your brand design 💜💜💜
Waited till I was off work for the week to watch! Computer is looking very spicy and handsome :) I also appreciate the minecraft music 〜
haha isn't he indeed so spicy and handsome ! thank you and hope you had a good work week. glad u r also into the music. i've been watching so many minecraft vids lately
@@2ynthetic thank u 〜 oh me too! Minecraft is so diverse I’ve been watching soothing build vids and challenge minecraft vids!
I love this. I want to evolve my aesthetic in a similar fashion. Also, did you know you can change the boot logo on these ROG motherboards to your custom logo? In the same ASUS app you use to flash the bios, AI Suite 3 I think. Or it might be EZ updater. Your custom 2ynthetic logo would be awesome to see on boot.
i didn't know that, i'm definitely going to try it out
13:00 thank you for this moment
Gorgeous! I love the logo animation on the cooler, such a cool addition *w*
thank you! i think it looks pretty cute spinnin' around in there hehe
this was very relaxing and pleasant! that gpu is simply beautiful, plus your logo on the plate and cooler made it extra special 🤍
love to work in those custom details :)) thanks for the kind words 🤍
Harika gözüküyor. Kanalınızı kısa bir süre önce keşfettim ve çok beğendim. ^^
end result is so pretty ;;
thank you, I really love how it turned out :)
I hope found people's around me same as you for been more smart . God blessed you . U r a true genius
I love your setup, it look soo clean without those crazy cables on the floor.
Really nice build and video! Loved watching it to the end
Good thing the RTX 3090 is in the hands if someone who will use it for something besides mining. The most laid back build video ever. Also are you going to overclock? Just checked R/AMDHelp and someone suggested resetting everything to default (voltage, frequency) first then use offset -0.1V then try cinebench. This will theoretically give you a -10 to -15 c temp difference. Alles Gute!
It's utilized better for mining than the redundancy it's going to experience there.. she's not going utilize 30% of the capacity of that gpu.. even editing 12k which NO one is using atm
ahh thanks for the tip, i'll look into the overclocking. yeah i'm excited to see what i can do with real time rendering projects now that i have the rtx :)) danke :D
watching your video, sipping on a cup of coffee and savoring some cake, raining outside and blankets all around. the perfect day thanks to your upload, definitely the cherry on the top. congrats for building your pc, and thanks for sharing another great, well made, calm video full of whim. you are definitely one of my favorite creators. thanks again for making my day a tad better with your upload.
(would like to add that even the coffee spill looked aesthetic.)
definitely the absolute perfect way to watch the video :D sounds so lovely. thank you so much for watching, I’m glad I could be part of your relaxing day
That is a brilliant build. Nice
I love your videos. i have a tipp for your PC, all your Fans are blowing Air out of the PC, so you create negative pressure inside the Case. Maybe you turn around the front fans, so they are blowing in fresh air. When you turnb around the front fans, the radiator colellects dust from the outerside. It's sometimes annoying to find the correct way to mount fans.
thank you for 20 mins of joy
it looks good, super clean and kind of funny. Spaghetti line got me well x)
enjoy your build! and big like also for daft punk and minecraft OST!
This was such a relaxing video. The pc is so pretty!
thank u sm, glad it was relaxing :) i like your pfp
@@2ynthetic Thank you! 😆
This was gold. Love your taste and humor. Subscribed.
It's perfect! You did such a grate job. Thanks for sharing 🤍
thank you :D my pleasure
Awesome build! You did a great job on it! kuddos thanks for sharing
i had that exact fan cooler, from youre old build pc. very coool;)
Love your videos! Ps- Emotion is my fav Daft Punk song. 😄❤️
such a good song 🎶
It is possible that it does not affect anything, but for future builds try not to mix thermal paste, it is possible that they have a reduction in efficiency when mixing the components
Your so methodical in this relaxed and inspiring way. Thank you
👌I enjoyed the cable management…always a sign of a perfectionist😅
nice build, very powefull and clean ♥
What a beautiful machine! I love the way your video is edited... It feels so relaxing and calm! New subscriber!
The pc looks so cool, It really fits the space!
thank u very much :)) I think it fits the space well too !
hey awesome video! just wanted to point out its sometimes recommended to run two separate power cables from the power supply to the graphics card for both plugs.
Your video showed up here for me, and I absolutely loved your channel!
Your videos are soo relaxing to watch I love them! I always watch them when while eating breakfast. I simply love your aesthetic and I will for sure take inspiration from you for me future office. Keep up the fantastic work!
thank you ! i'm so happy to be part of breakfast. hope you have a lot of fun setting up your future office :))
I really enjoy your videos! The asthetic is on fire!!!!
I made a coffee after watching this beautiful video
Next level
Very unic
No time waste
No unwanted things 😀😀
so, satisfying to watch
Ambient Lo fi PC Built :D Love it!
sweat conditioned water....sounds delisshhh
was inspired to try to build my next computer by myself :] thnx
What cameras do you use to film your youtube videos? I really like the quality
Оказывается я не так плохо знаю английский
В этих видео такая спокойная атмосфера
Хотя услышать музыку c418 здесь я не ожидал
А из-за огромных интервалов между музыкой создаётся атмосфера майнкрафта
Я не ожидал, что открыв комментарии у меня возникнет желание написать свой такой же милый
Я вижу вы решили заменить ваш старый компьютер 2016года. Отличная идея. У меня компьютер 2012 года и до сих пор хорошо работает🙂
Wow how funny my pc was also from 2016 and I needed to upgrade the cpu and ram because my art software was crashing so bad! I have a black and white build and named it panda 🐼 the components are all white except for the inside of the case and my peripherals. I love that little tool kit you have, what a clever way to hold bits!!
This makes me want to throughly clean my keyboard and finally upgrade my cooler too an aio! I bought it last month, but I haven’t had to time to install it and I need to rearrange my fans.
really love the vyb of your videos. we will need more :)
2ynthetic I like your style and that's why I started to follow you. If I'm wrong you can correct me, but I think that the front fans should go outside and not inside due to the type of air movement they generate.
Just want to ask you being a designer and a aesthetic freak, by the way I’m one too, why do you prefer a PC instead of a MAC?
Love your videos and aesthetic, the way you hide your face it’s very….cute😉
Sometimes messy must live this from the heart of the just life
Really love your new setup. And your old setup too ha ha
Watching u is fun and inspiring. Im excited to build my workspace soon! 🙏 Manifesting it.
I could watch this quality soulfood forever 👌😇👌 Ps. Was your ram XMP on btw? So you don't miss out on all that ram power...cute aaand powerful 👍 Have a fantastic week, and a good coffee ☕
Tragic coffee spill. An absolute travesty. Prayers out
I was in a trance this whole video
your pc build was amazing
You should next get linus to build you a petabyte NAS so you can keep all those huge project files from your DCC's archived properly! Plus itd be a nice "decorative object" for the studio XD
I was about to buy a Mac but this video convinced me to build a pc
This was so relaxing.
I'm glad you got to do the build!
This is Atom again haha!
Great videos as usual!
Loving the build!
I'm jealous of you to be honest haha!
My build has 6900 XT (which I'm thinking if I should change it to 3090 or 3090 Ti) - or maybe that would be an over kill!
Loved the video and vibes, and everything!
Nice colors, and enjoy the new PC< and looking forward to see more of the work you do with it!
Awesome!
Into the next video of yours now!
thanks atom :D
using 5950 and 3090 and there's no intake air? keep the corsair fan where it should be, the aio put on the top, thats the better way. thank me later
You should come out with 2024 wall calendar with creative pics
Lots of love from Tripura India ❤️💕
14:14 minecraft songs 👍😄, nice build!
your videos are always so nice n peaceful :-)
ty glad u think so :))
Perfect aesthetic!
I am jealous for the Bad Boy 3090
how satisfying😌
most satisfy pc build ever 🥰
just a small suggestion for the aio cooler fans orientation. These should be flipped as intake to get fresh air from the front than exhaust. In exchange, you will lose some of RGB light since these fans only have light on one side. But you can also put the fans in front of the radiator if it is not blocked by GPU. So that you can both get better airflow and RGB.
thank you, that's a great suggestion. yeah i couldn't do the intake/exhaust setup i had planned bc of the cooler fitting issue. i don't really want to flip the front rgb fans bc of the looks lol, but i was thinking about flipping the back single fan to be intake like the top fans... it still wouldn't be my ideal tho. anyways thanks again :)
@@2ynthetic have you tried swapping the position of the fans and radiator. So scews will go through front plate --> fans --> radiator. I still have a hope that this way will work. Other wise flipping top fans as intake will also work fine. Swapping fans with rgb in both sides in the future is also a good idea too.
@@thangnguyenviet5628 the thing is i want the radiator fans to be towards the inside of the case, not towards the outside. otherwise i agree switching them to the other side would be the best option. currently the top fans are intake. yeah i'll probably just have to get different fans to achieve the ideal
Hi, 2yntethic, I'm loving your videos. Please give us more content!
hi, i think u should put water cooling on top... because now u have two sets of fans : one from case pushing air inside and from water cooling outside ;p also its just better for pump to be verticaly on bottom so there is no air on pump. best way to slove it is just put cooling on top
Beautiful! We have almost the exact same system, except you have a waaay better motherboard. That and a new case are what I’m upgrading next. (And I bought mine as a refurb custom from NZXT. Not brave enough yet to build my own).
You should flipped over your kanto speaker. The left one is with the blue led. Just try it on a simple stereo test video on youtube.
The Egoist poster though.. :o
Very aesthetic… should have got a 1000watt PSU though 💀
Fan on Radiator is wrong direction, you have to set in front of the Case to blow a cool wind into a Case
love your videos! so cozy and love the aesthetics :) I had a question about your choice of NVME storage, is there a reason you went with gen3 samsung 970 evo plus rather than perhaps a gen4 980 pro for example? im deciding how to choose storage for my pc also (photographer/photoshop) and I also have gen4 pcie storage option on my motherboard with a 970 evo plus that i might upgrade
Awesome build ❤
I almost had a heart attack when you were peeling off the protective plastic on the glass while the PC is running. Sometimes peeling it off creates too much static that it kills the PC. Next time, maybe peel if off before you assemble the PC. It happens very so often but you can never be too safe.