I run hubcentric spacers on all 4. 10mm in the rear and 8mm in the front. You just have to make sure that it's the exact size for your hub and still have at least 5 revolutions by hand with the lugnuts before using the impact and torque wrench or use the kind that bolt on to your studs.
Hey bro i purchased some Eibach spacers from american muscle on my 2014 mustang a few years back. About $100 a pair. Was driving to town one day and i ended up luckily pulling up to a bank and noticed my rear passenger wheel had 2 lug nuts left on the wheel. Jacked up my car and got a buddy to bring my old wheels and we took that sheet clean off at the bank. Never using spacers again. Never recommending them lol. Glad i had to go to the bank when i did
I want so badly to rent this car just to have a blast with this vehicle. That color is DISGUSTINGLY sexy btw. Congratulations on the car, enjoy it for me.
Sounds great, Love the hoodie and trust me those BC Forged are practically useless and worthless I'll take them off your hands and the Rohana's too send em my way.
Speaking of oils, what is the best to run in a stock s550? 5w-20, 5w-30? Full synthetic or synthetic blend. Ford says or recommends 5w-20 synthetic blend, but why?
Is it any different than an x pipe on any other coyote? Or does it sound loud and raspy? I’ve tried probably 5 different mid pipes… and unless you didn’t just want loud… most were not an improvement. I wanted to hear a borla switchfire… seems like it has potential. I guess I find it a bit funny that people race out to install whatever parts on a new model or a new trim level, and then in probably lots of people’s opinion… go with something that is improvement in maybe only slight power increase and some weight savings…
I have ran a X pipe on every mustang I have owned they flow the best if you ever decided to go boost but with the twin intake the sound has changed a little from the other years a H pipe will sound deeper but I always go for what ever is best for performance I could care less about sound all I care about is speed tbh 😂
Chrome lip wheels are my least favorite wheels. C8 came with those and it looks like canine fluids. Fully polished, black or bronze would be better imo. To each their own tho. Sick car can't wait for the ripping vids
![YoungBoy Never Broke Again - Sneaking [Official Video]](http://i.ytimg.com/vi/1ILUps2zDFU/mqdefault.jpg)
Dark Horse is TOUR READY boys!! Make sure you pop out and see them!
your stop here in TN is 20 minutes from my house
I’m about 40 min away, bringing my DH
Idk what they did but even stock the car sounds really good
Those wheels look crazy too
Yeah they look so good
Sounds niiiiice!! I like the dark horse! Loving the antics on the videos they are hilarious!! 100K let’s go!!!
Thanks Paul
Becoming a fan of your channel, keep it up
Thank you 🙏🏽❤️
Congrats. And congrats on the deal you got on it 👌🏼
Thanks brother
I run hubcentric spacers on all 4. 10mm in the rear and 8mm in the front. You just have to make sure that it's the exact size for your hub and still have at least 5 revolutions by hand with the lugnuts before using the impact and torque wrench or use the kind that bolt on to your studs.
Thanks for the info I’ll check them out
New tires sounded like you hired a clown to make balloon animals at your birthday party. 🐐🤣🥳
Thanks for watching !
It sounds great. Still trying to decide if I go X or H. Does sound good stock. Not a fan of the new wheels but to each their own!
Yeah new wheels arnt going on the car not gonna run the spacer but I like the tone of the X pipe
@@ItalianStallion410 so it sound amazing live ? Enjoy your content and take on cars! Nice job!
@@cutch816 yeah the tone of it now driving with the X pipe is so perfect
X pipe, I’ve had both and the X just suits the nature of the engine more.
Damn, I do love that Dark Horse, that thing is so bad ass . 🇺🇸💪🏼🐎 I’m Jealous LOL 🤣
Thanks my brother
Hey bro i purchased some Eibach spacers from american muscle on my 2014 mustang a few years back. About $100 a pair. Was driving to town one day and i ended up luckily pulling up to a bank and noticed my rear passenger wheel had 2 lug nuts left on the wheel. Jacked up my car and got a buddy to bring my old wheels and we took that sheet clean off at the bank. Never using spacers again. Never recommending them lol. Glad i had to go to the bank when i did
Damn that’s crazy that coulda ended really bad thank god you caught it
Goodness the dark horse sounds AMAZING! Never gets old for sure!
It’s so perfect
You should post the mileage at the beginning of every video on screen. Just a little info during break end. Beautiful car. Would be my color choice
I can start doing that I will try and remember
Sounds Good and wheels are 🔥🔥🔥🔥
Thanks man
I guess I'm going to mull it over, over the winter if I'm going with an H or X pipe. Really waiting for different long-tube options too!
Go kooks headers best ones
I want so badly to rent this car just to have a blast with this vehicle. That color is DISGUSTINGLY sexy btw. Congratulations on the car, enjoy it for me.
Thank you and I will!!
No Shit, my grandmother lived in Fallston. I’m down in Huntingtown, Calvert County. Maybe I’ll see ya around…
Small world I am sure I will run into you
Looks good. Like those rims. They look great on the Horse.
I will
Sounds awesome💯 we just need to hear it when u on the track💯
Ghost👍👍💯
I can’t wait to get it on the track gonna be a blast
Sounds great, Love the hoodie and trust me those BC Forged are practically useless and worthless I'll take them off your hands and the Rohana's too send em my way.
Hahaha come buy them please
The car is absolutely amazing!!!
Thank you
Your puppy is absolutely adorable!!!
Thank you!!
Speaking of oils, what is the best to run in a stock s550? 5w-20, 5w-30? Full synthetic or synthetic blend. Ford says or recommends 5w-20 synthetic blend, but why?
They recommend that for fuel Economy but 5w30 is good I run 5w50 cause I run the cars hard
Is it any different than an x pipe on any other coyote? Or does it sound loud and raspy? I’ve tried probably 5 different mid pipes… and unless you didn’t just want loud… most were not an improvement. I wanted to hear a borla switchfire… seems like it has potential.
I guess I find it a bit funny that people race out to install whatever parts on a new model or a new trim level, and then in probably lots of people’s opinion… go with something that is improvement in maybe only slight power increase and some weight savings…
I have ran a X pipe on every mustang I have owned they flow the best if you ever decided to go boost but with the twin intake the sound has changed a little from the other years a H pipe will sound deeper but I always go for what ever is best for performance I could care less about sound all I care about is speed tbh 😂
Spacers scare me. See you guys here in Charlotte!
Should be hub-centeric, keep an eye on those spacers.
I took them off I just wanted to see how it look
If you only had to choose one which would it be? Dark horse or GT500?
Such a hard choice if it was just for me to enjoy and I wasn’t doing videos I am going dark horse if I am racing it Alot I’ll go GT500
MEATBALL WHERE YOU GOING BRO 😂😂😂😂 MEATBALL was like WHAT CHU WANT FOOL. LOL
😂😂😂 right
The right tips are hanging more maybe you gotta turn the pipe a bit so it could raise the right side tip. I hate to point it out but had too lol 😅😅
I am cross eyed 😂😂
@@ItalianStallion410 😂😂😂.
Ehhhh Meatball! Love you buddy!🐶
❤️❤️
Chrome lip wheels are my least favorite wheels. C8 came with those and it looks like canine fluids. Fully polished, black or bronze would be better imo. To each their own tho. Sick car can't wait for the ripping vids
Thanks brother
Where in MD are you? I’m picking up mine on the 10th…
Belair md
Don't know why but I hate EVERY RUclipsR that got there 24 mustang. You my friend it's different am so happy for you and CHUCK HAHAHAH good job boys
Thanks brother makes me happy to see comments like this we taking this thing to the moon 😈💪🏽
Anything looks better than the factory DH wheels!
I kinda like them in person but not in pictures
Wheels are fire, looked to be low on psi.
Yeah coulda been a little low been in the shed for a few weeks
If you’re still looking for the KN filters, CJ Pony Parts has them $149/pair
Damn that much 😅 for filters
Yeah a little pricey, but you’ll never have to buy them again
@@jmatech I’ll prolly get them before the trip and before I dyno it
Ouu tbh those wheels are fire 🔥 but some lowering springs would set it
Yeah I wanna lower it so bad but I think on my roads it will scrape a lot
Them wheels 🔥🔥🔥
What size tire is on the front BCF wheel ? I am gonna try the H pipe
They are 265/35/20
Whaaaa? No Chuck? Nah you playn....where Chuck at?!
Love it bro 💪🏻
Thanks man!
Is that meat filming too 😎. He does it all! I need a helper like that. Cutting it up with 400 miles 😂😂😂
I got you 😂😂
Where did you get your X pipe? CJ has a Roush but they want $300
Got mine from Steeda
Where did you get your lift? What model is it please?
It’s a atlas 10k pound lift a company near me installed it
How big in inches the front rotors?
Mhmm I think 18 or 19
@@ItalianStallion410 Bigger then 16.5 inches GT500 rotors? If you have a chance measure them and reply please. Sometimes this winter. 😁
@@ironbull2003 I know they are close to the rims and they are 19in
@@ItalianStallion410 I googled it, it says dark horse has 15.4 inch rotors. So 1.1 inch smaller then GT500
How tall is your garage was interested in putting a lift in my garage
I think 12 maybe a little more
I thought Chuck was off today.😂
😂😂 he called out
you installed an xpipe? lmao video 9001!
Hahah thank you
Love everything else you did to the car but wheels🤦🏻♂️
MUSTERO!!!!!!!!
That’s dope too
Chuuuuuuuuuck!..hi🖐
stock wheels loos so much better to be honest. im not a big fan of the honda civic wheel style
Yeah I went back to stock
Please name it Hanzo please!
This MF about to get dogged😂
😂😂 right
@@ItalianStallion410”WE’RE GOING TO JAIL” my fav line by Jake! 😂😂 haha
Put the stock wheels back on. The wheels are nice but don’t belong on that stang.
Yeah I did
Wheels don’t look good Brotha oem looks killer
I went back to OEM I just loved that style they are getting sold
Ford say 1000 miles.
I saw that now
You could sell it and get 3 2023 gts 😂😂😂
😂 facts
*H pipe would sound better*
I haven’t heard one in person yet
Gay ass wheels tbh bro
Steeda went super cheap with those clamps. Do it right and weld it in.
I rather have clamps so if I gotta take the exhaust back down I can and it will come down in 3 sections
I’ve seen the tips rhino 🦏 lined if the chips or wear gets bad ..looks good bro!!💯
Thanks brother!
Meatball debating unionizing after seeing these UAW strikes 🪧
😂😂 he went on strike