True but most people are not mechanically inclined enough to go looking for the fuel rail. It’s very easy to find the air box though. The easier the better
Bro excellent step by step diagnostics. Mine didn’t start even after the ether/starter spray. So I’m going to see if maybe it’s the crankshaft position sensor. Car was sitting for 3 months, cranked but no start even with the car boosted. All fuses checked.
I have 2011 328 Xi and my car is wanting to start and only cranks. I have had the Fuel module replaced. But my car window on that side when it rains gets water in it from it being fixed if it gets wet a little would it not start or if it gets on the wires give it an issue not starting by chance? You have one of the best videos explaining step-by-step instructions. I wish you were in Maryland I would ask you to help me work on my car as my Mechanic. Thank you for your time. my name is Melanie.
Sometimes water can do that but it’s not common for that to happen. If I was close to the car I could do some diagnosis to help find the problem. How about fuses and fuel pump itself?
Hi, i need help with my car problem, the problem is my car crank but won't start, i checked injector signal, there's no signal, i checked ignition coil, there's also no signal, then i checked all fuse and relay, there's no fault. After that i checked all the wiring on engine, there's no problem with the wire harness, lastly i checked the ecm/ecu, i bring it to ecu repair shop they checked no faulty and i pay charge for checking usd60, after that, i try to start again, its still won't start, then i bring the ecm/ecu again to the bmw agent for checking with charge usd100, they also said there's no faulty with the ecu/ecm. I checked the fuel pump its working, i checked the pressure of fuelpump its working perfect. I checked the immobiliser, also no problem, Im still wondering with the problem and why my ignition coil and injector no power and no signal. Fault code on obd is P0341, P101b and P1061 , i tried clear, after a few minutes its appear again, anyone know what the problem? My car BMW 320i E90 2006, engine N46
marvino i need you help my car wont but its able to start what could be the problem its uk made 2000 model 325i bmw have tried to change mass air flow senser and padle nothing it all started after the air flow sansor was misplaced please help
having a problem with my 2008 bmw 535xi battery was replaced and not coded at the time I crank it and the car turn on for 20 second and then turn off, after I got that I got someone to come and code th battery but still won't turn on so I got the car scanned and it through code and got them cleared but one that said low fuel pressure sensor. I then replaced this and retried but nothing. for a moment I looked and thought it would maybe be my ibs so disconnected it to and tried again and nothing it cranks but won't turn over, I have checked my both of my fun box to see if anything is wrong but every check out to be good. any advice or help?
Have you checked if you are receiving fuel in the engine bay? There is an easy way to do that by using a tiny tipped screw driver to press the pressure point in the engine bay by the injectors. U can also do what I did with the starter fluid. If the car starts then dies, u will know that the problem is your fuel
@@straight-to-the-point4667 its tried starting up last night but I think it has to do with engine gas flood so now im looking into how to get this fixed
I got a 2003 bmw 745li and it would not start it cranks but nothing about a week ago I tried the ether spray and it would start I hear the fuel pump work but this week it would not spray with starting fluid I even replaced the crankshaft sensor any ideas?
I hope you have not flood the engine with starter fluid. That is the risk of using too much of it. But it seems like you have a fuel problem so first check all fuel fuses and relays. If they check out then it is your fuel pump. P.s if you can hear the fuel pump, it doesn’t mean it is good. It can be weak and u will still hear it.. so change fuel pump if all fuses and relays checks out. That’s my suggestion
@@straight-to-the-point4667 shouldn’t the engine start with starting fluid I only spray like one second of it and nothing the fuel pump fuse is good I’m out of ideas
![Jordan Adetunji - KEHLANI REMIX (feat. Kehlani) [Official Video]](http://i.ytimg.com/vi/EeJ8n5PxFGE/mqdefault.jpg)
I like the step by step approach bro. Thank you for this video!
Good helpful video thank you I’ll try this out
My 2009 bmw wouldn’t start, the problem was in the fuse box. You’re video helped a lot thanks! 04/03/2022
You are welcome.
Don’t be shy what was in the fuel box that needed to be fixed
What was it
Dude what was it???!
What was it?
Thanks alot it work 💯 my friend
Good job PD....
Five stars 🌟 , but just how you made that hole in the gasoline tank without explosion 💥 😂😂😂😂, really good video thanks 🙏
Chisel and hammer.
Thanks alot from 🇬🇧
Great... I am going outside to try it NOW. I will let you know if I was successful. 👍🏾👍🏾 Thanks 🥰
Did it work
You’ll eventually need a new battery, under “good” conditions it should read 14.6
Tks for video . Same as yours here . I will change the fuel pump know
🤣🤣🤣 ''THE FOOOOL PUMP" "A FOOL PROBLEM" "# 7EEE" . lol. nice job brother 👍
Nice Bro I gave you a like👍🏾
Thank you sir for sharing. Very helpful.
Don't need starter fluid. To check if gas getting to engine. Just check at the schrader valve on the fuel rail
True but most people are not mechanically inclined enough to go looking for the fuel rail. It’s very easy to find the air box though. The easier the better
That pesky fool pump always gets u!!
Bro excellent step by step diagnostics. Mine didn’t start even after the ether/starter spray. So I’m going to see if maybe it’s the crankshaft position sensor.
Car was sitting for 3 months, cranked but no start even with the car boosted. All fuses checked.
Hey bro what was the issue? Havin the same problem 🤦🏽♂️
Any updates?
@@ryan_npl6971 any updates?
Updates?
Same problem please help
Nice work bro
Thanks 🔥
I have 2011 328 Xi and my car is wanting to start and only cranks. I have had the Fuel module replaced. But my car window on that side when it rains gets water in it from it being fixed if it gets wet a little would it not start or if it gets on the wires give it an issue not starting by chance? You have one of the best videos explaining step-by-step instructions. I wish you were in Maryland I would ask you to help me work on my car as my Mechanic. Thank you for your time. my name is Melanie.
Sometimes water can do that but it’s not common for that to happen. If I was close to the car I could do some diagnosis to help find the problem. How about fuses and fuel pump itself?
Mine was the fuse 70 ...a 20 small double spade
On my N46 engine where do l spray starter fluid??
Hi, i need help with my car problem, the problem is my car crank but won't start, i checked injector signal, there's no signal, i checked ignition coil, there's also no signal, then i checked all fuse and relay, there's no fault. After that i checked all the wiring on engine, there's no problem with the wire harness, lastly i checked the ecm/ecu, i bring it to ecu repair shop they checked no faulty and i pay charge for checking usd60, after that, i try to start again, its still won't start, then i bring the ecm/ecu again to the bmw agent for checking with charge usd100, they also said there's no faulty with the ecu/ecm. I checked the fuel pump its working, i checked the pressure of fuelpump its working perfect. I checked the immobiliser, also no problem, Im still wondering with the problem and why my ignition coil and injector no power and no signal. Fault code on obd is P0341, P101b and P1061 , i tried clear, after a few minutes its appear again, anyone know what the problem? My car BMW 320i E90 2006, engine N46
Might've been the crankshaft position sensor, have u tried replacing it?
marvino i need you help my car wont but its able to start what could be the problem its uk made 2000 model 325i bmw have tried to change mass air flow senser and padle nothing it all started after the air flow sansor was misplaced please help
Aye buddy I need your help I have a 745 that cranks no start please help
having a problem with my 2008 bmw 535xi battery was replaced and not coded at the time I crank it and the car turn on for 20 second and then turn off, after I got that I got someone to come and code th battery but still won't turn on so I got the car scanned and it through code and got them cleared but one that said low fuel pressure sensor. I then replaced this and retried but nothing. for a moment I looked and thought it would maybe be my ibs so disconnected it to and tried again and nothing it cranks but won't turn over, I have checked my both of my fun box to see if anything is wrong but every check out to be good. any advice or help?
Have you checked if you are receiving fuel in the engine bay? There is an easy way to do that by using a tiny tipped screw driver to press the pressure point in the engine bay by the injectors. U can also do what I did with the starter fluid. If the car starts then dies, u will know that the problem is your fuel
Try to rule out fuel system. The fuel pump and fuel relay gives up easily in these cars
@@straight-to-the-point4667 its tried starting up last night but I think it has to do with engine gas flood so now im looking into how to get this fixed
I got a 2003 bmw 745li and it would not start it cranks but nothing about a week ago I tried the ether spray and it would start I hear the fuel pump work but this week it would not spray with starting fluid I even replaced the crankshaft sensor any ideas?
I hope you have not flood the engine with starter fluid. That is the risk of using too much of it. But it seems like you have a fuel problem so first check all fuel fuses and relays. If they check out then it is your fuel pump. P.s if you can hear the fuel pump, it doesn’t mean it is good. It can be weak and u will still hear it.. so change fuel pump if all fuses and relays checks out. That’s my suggestion
@@straight-to-the-point4667 shouldn’t the engine start with starting fluid I only spray like one second of it and nothing the fuel pump fuse is good I’m out of ideas
@@zlatanzifovskijr4576 I think u said it started with the starter fluid at first right? And now it is not starting no more right?
@@straight-to-the-point4667 yep
I know it's been a year, pump just needs primed, and can be done with a bmw scanner.
I got a 330i no start turns on no start could it be kl30g ?
Most likely, i have the same problem. Only thing is that most auto shops dont have that specific relay and you have to buy online.
in where ??