Dead USB-C Port - How to program a Cypress PD-Controller onboard with Miniprog 3

Поделиться
HTML-код
  • Опубликовано: 14 дек 2024

Комментарии • 51

  • @TenkaiSp
    @TenkaiSp 4 месяца назад +4

    From serious liquid damage to getting a dedicated programmer and firmware shenanigans. What a fighter :D

  • @damned2000
    @damned2000 24 дня назад

    Great investigation , you did explain more information, than official documents does. Thank you so much

  • @azureuscomputerrepairs
    @azureuscomputerrepairs 4 месяца назад +1

    From an older guy in semi retirement I crave for a new video on this channel. You are an inspiration for the new generation of "thinkers" regarding modern laptop repair.
    Keep up the good work. Much kudos to you Sir and thank you Mike! 🙏

    • @fairrepair_en
      @fairrepair_en  3 месяца назад

      Thank you for the praise. Especially from a real institution at chip level. Best regards!

  • @stevedebeukelaer1424
    @stevedebeukelaer1424 4 месяца назад

    Nice work , nice investigation you are the firs who figured out. Congratulations Mike👍

  • @rahulmechatronics
    @rahulmechatronics 4 месяца назад

    Thanks for sharing your knowledge 👍👍

  • @SOS.ProRepair
    @SOS.ProRepair 4 месяца назад

    Merci infiniment pour cette methode exclusif, mes grandes respects à vous ❤

  • @seanlewisakashaaamus2647
    @seanlewisakashaaamus2647 3 месяца назад +1

    Hi Mike big follower here, is everything ok I have noticed you have not posted a video for a month now, hope everything is ok 🤙from the UK

    • @fairrepair_en
      @fairrepair_en  2 месяца назад +3

      Hey Sean, thank you very much for your attentive interest. It's complicated. :)
      I'm fine, I just don't have time to record videos at the moment.
      I'll do my best to make it different again!
      Best regards

    • @seanlewisakashaaamus2647
      @seanlewisakashaaamus2647 2 месяца назад

      @@fairrepair_en thanks for the reply Mike, glad you are all good and busy , make hay whilst the sun shines regards Sean

  • @Abdallah.795
    @Abdallah.795 4 месяца назад

    Much love nice comment for my one of best teachers. Greetings from lebanon❤

  • @bibeksapkota4883
    @bibeksapkota4883 4 месяца назад

    Subscribed on a first video. Im your fan bro

  • @JustInspiredKent
    @JustInspiredKent 4 месяца назад

    Wow! That's some amazing dedication and determination. It's good to know there may be a way forward when it comes to these PD controller chips. I've replaced some basic Texas Instruments ones myself that don't require programming but haven't actually had one like this in for repair yet. Thanks for sharing. Definitley going to look into getting a Miniprog3 programmer.

  • @skysurfhf
    @skysurfhf 4 месяца назад

    Thanks for sharing your knowledge... Greattings from Portugal 🇵🇹 🌟

  • @BloodSportOG
    @BloodSportOG 4 месяца назад

    Very underrated repair channel!
    Thanks for sharing

  • @JFIXX1
    @JFIXX1 4 месяца назад

    Thankyou for sharing Mike and I appreciate the English videos, I have saved this and think it may come in handy in the future!

  • @fixitprohr
    @fixitprohr 4 месяца назад

    Mike as always, why would he repair easy stuff when he can do exotics as always :D Good work Mike

    • @fairrepair_en
      @fairrepair_en  4 месяца назад

      @fixitprohr Thank you my friend! :)

  • @tongravity5668
    @tongravity5668 4 месяца назад

    Nice work Mike!

  • @registriert2012
    @registriert2012 4 месяца назад

    hi mike, what a nightmare repair 🙈😂 but you genius did the very hard job, well done 👍. I don´t think many others would have solved this one, we will have to call you Sir Mike from now on :) gruß aus whv 😊

    • @fairrepair_en
      @fairrepair_en  4 месяца назад

      No need to call me sir... 😅
      Die Recherche war mit Abstand der härteste Job hier.
      Viele Grüße nach Wilhelmshaven.

  • @karltest1314
    @karltest1314 4 месяца назад

    Fantastic result Mike, must have taken you a few minutes to work that one out :)

    • @fairrepair_en
      @fairrepair_en  4 месяца назад

      @karltest1314 oh yes... :D
      Thanks and best regards

    • @karltest1314
      @karltest1314 4 месяца назад

      @@fairrepair_en now you have the firmware and programmer, you can sell pre-programmed chips as a service

  • @alessandrovirdis520
    @alessandrovirdis520 4 месяца назад

    Mike, this is amazing!!!!

  • @teslasapple
    @teslasapple 4 месяца назад

    Very nice 👌 thanks for sharing this much needed process 😊

  • @hervesartori6663
    @hervesartori6663 4 месяца назад

    Great and hard job...

  • @sookye2013
    @sookye2013 4 месяца назад

    Thank you 👍🏿👍🏿 it is useful.

  • @toannguyen-hf5xk
    @toannguyen-hf5xk 4 месяца назад

    Thanks teacher
    Great teacher
    When replacing ic Type_c, the program must be copide

  • @toannguyen-hf5xk
    @toannguyen-hf5xk 3 месяца назад

    Hello teacher
    basic laptop repair video
    Thanks

    • @fairrepair_en
      @fairrepair_en  2 месяца назад

      I will see what I can do. Any certain circuit?

  • @wizzitech7504
    @wizzitech7504 4 месяца назад +1

    Wow amazing how firmware complicated repair nowadays

  • @unintendedperson
    @unintendedperson 4 месяца назад

    wow. easy solution 😅

    • @fairrepair_en
      @fairrepair_en  4 месяца назад

      @unintendedperson I'm sorry, but the different manufacturer try everything to make our lives hard... it's at least a way... :)
      Best regards

  • @nusko2371
    @nusko2371 2 дня назад

    You can get firmware very easy from bios using Dell PFS extractor tool...

  • @fabrice934
    @fabrice934 4 месяца назад +1

    Congratulation, you could now extract firmeware from pd controler. Is it really necessary to program pd controller? Is only a bios update could be enough? Thanks

    • @fairrepair_en
      @fairrepair_en  4 месяца назад +2

      @fabrice934 I have tried to push the BIOS Update into the "stock" firmware of the PD-Controller multiple times with different approaches. Unfortunately it did not work.
      Thanks and best regards!

  • @samuelgift6889
    @samuelgift6889 3 месяца назад

    Like seriously?
    I don't like your videos, of course! I love then. It makes me strong!
    Impossible to subscribe a million time though!
    Thank you!

  • @bagotaitamas
    @bagotaitamas 2 месяца назад

    Hey! I have a pretty rare board with this controller that I have already replaced but needs programming. Would you lend your miniprog3 to hungary? Or could I send the board to you? I am yet to source the firmware, i am planning to read it form another board if it's not in the bios firmware update file.

  • @hosamajram1164
    @hosamajram1164 29 дней назад

    where are sirrrrrrrrrrr
    we miss you
    where is your vedios

  • @andreass.7152
    @andreass.7152 3 месяца назад

    Hallo wie kann man dich erreichen hätte eine Frage.

    • @fairrepair_en
      @fairrepair_en  2 месяца назад

      Man kann mich nach wiebvor per Mail an info@fairrepair-germany.de erreichen oder in einem der verlinktem Discord-Server. 👍

  • @linomoschin9521
    @linomoschin9521 4 месяца назад

    le tue riparazioni non sono per i deboli di cuore grazie ciao

    • @fairrepair_en
      @fairrepair_en  4 месяца назад

      It is true. For some reason I have the talent to regularly get such repairs... 😅

  • @qusaiabuhana6066
    @qusaiabuhana6066 4 месяца назад

    Hallo Mike .Kannst du bitte mir helfen, ivh habe alles möglich versucht mein Laptop zu reparieren aber klappt das nicht . Ich bin Student und Ich werde richtig dankbar sein ❤

    • @fairrepair_en
      @fairrepair_en  4 месяца назад

      Unfortunately i am very busy and can't assist regularly. But there are great repair communities in discord as well. Very clever and helpful people around. Server are linked in the video description.

  • @jasko.n
    @jasko.n 3 месяца назад

    Feels good. Nice work mate 🧉 Finally a bit time to watch.

    • @fairrepair_en
      @fairrepair_en  2 месяца назад +1

      Finally had time to respond to the comments. Thank you my friend. Für mich persönlich war es ein gigantischer Erfolg und es bedeutet mir sehr viel wenn eine erfahrener Ingenieur/Techniker das bestätigt. :)
      Viele Grüße!